Replace WMIC sections

Addresses issue #227

.gitignore

@@ -0,0 +1,8 @@
+**/__pycache__
+**/*.7z
+**/*.DS_Store
+**/*.bak
+**/*.exe
+**/*.swp
+setup/BUILD*
+setup/OUT*

.linux_items/.gitignore

@@ -1,2 +0,0 @@
-wk_tmp
-wk-repo

.linux_items/archlive/airootfs/etc/locale.conf

@@ -1 +0,0 @@
-LANG=en_US.UTF-8

.linux_items/archlive/airootfs/etc/locale.gen

@@ -1 +0,0 @@
-en_US.UTF-8 UTF-8

.linux_items/archlive/airootfs/etc/motd

@@ -1,9 +0,0 @@
-Welcome to the WK Linux Toolbox
-
-Some common commands:
-% hw-diags
-% hw-info
-% mount-all-volumes
-% mount-backup-shares
-% connect-to-network
-

.linux_items/archlive/airootfs/etc/oblogout.conf

@@ -1,20 +0,0 @@
-[settings]
-usehal = false
-
-[looks]
-opacity = 70
-bgcolor = black
-buttontheme = foom
-#buttons = cancel, logout, restart, shutdown, suspend, hibernate, lock
-buttons = restart, shutdown, logout
-
-[shortcuts]
-cancel = Escape
-shutdown = S
-restart = R
-logout = L
-
-[commands]
-shutdown = systemctl poweroff
-restart = systemctl reboot
-logout = openbox --exit

.linux_items/archlive/airootfs/etc/skel/.Xresources

@@ -1,64 +0,0 @@
-! general settings
-URxvt*saveline:         15000
-URxvt*termName:         rxvt-256color
-URxvt*iso14755:         false
-
-! appearance
-URxvt*depth:            32
-!URxvt*background:      rgba:0000/0000/0000/AAAA
-!URxvt*background:      [80]#404552
-!URxvt*background:       [100]#2f343f
-!URxvt*foreground:       #F8F8FF
-!URxvt.underlineColor:   #4682B4
-!URxvt.highlightColor:   #4682B4
-!URxvt.throughColor:     Blue
-!URxvt*cursorColor:      #dc8cc3
-!URxvt*cursorColor2:     Black
-URxvt*scrollBar:        false
-URxvt*scrollBar_right:  false
-URxvt*internalBorder:   0
-URxvt*externalBorder:   0
-!URxvt.colorIT:      	#87af5f
-!URxvt.colorBD:      	#c5c8c6
-!URxvt.colorUL:      	#87afd7
-URxvt.geometry: 	92x16
-URxvt.internalBorder:	8
-URxvt.shading:		10
-URxvt.transparent:	true
-
-! Base16 Isotope
-! Scheme: Jan T. Sott
-!! Modified by 2Shirt
-
-*.foreground:   #d0d0d0
-*.background:   #000000
-*.cursorColor:  #d0d0d0
-
-*.color0:       #000000
-*.color1:       #ff0000
-*.color2:       #33ff00
-*.color3:       #ffd000
-*.color4:       #0066ff
-*.color5:       #cc00ff
-*.color6:       #00ffff
-*.color7:       #d0d0d0
-
-*.color8:       #808080
-*.color9:       #ff9900
-*.color10:      #404040
-*.color11:      #606060
-*.color12:      #c0c0c0
-*.color13:      #e0e0e0
-*.color14:      #3300ff
-*.color15:      #ffffff
-
-! fonts
-Xft.autohint: 0
-Xft.antialias: 1
-Xft.hinting: true
-Xft.hintstyle: hintslight
-Xft.rgba: rgb
-Xft.lcdfilter: lcddefault
-URxvt.font:	xft:Inconsolata:size=12
-!URxvt.letterSpace: -3
-

.linux_items/archlive/airootfs/etc/skel/.bash_logout

@@ -1,3 +0,0 @@
-#
-# ~/.bash_logout
-#

.linux_items/archlive/airootfs/etc/skel/.bash_profile

@@ -1,5 +0,0 @@
-#
-# ~/.bash_profile
-#
-
-[[ -f ~/.bashrc ]] && . ~/.bashrc

.linux_items/archlive/airootfs/etc/skel/.config/i3/config

@@ -1,314 +0,0 @@
-# This file has been auto-generated by i3-config-wizard(1).
-# It will not be overwritten, so edit it as you like.
-#
-# Should you change your keyboard layout some time, delete
-# this file and re-run i3-config-wizard(1).
-#
-
-# i3 config file (v4)
-#
-# Please see http://i3wm.org/docs/userguide.html for a complete reference!
-
-set $mod Mod4
-
-# Configure border style <normal|1pixel|pixel xx|none|pixel>
-new_window pixel 1
-new_float normal
-
-# Hide borders
-hide_edge_borders none
-
-# Pulse Audio controls
-bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume 0 +5% #increase sound volume
-bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume 0 -5% #decrease sound volume
-bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute 0 toggle # mute sound
-
-# alt+tab navi
-bindsym Mod1+Tab workspace next
-bindsym Mod1+Shift+Tab workspace prev
-
-# change borders
-bindsym $mod+u border none
-bindsym $mod+y border pixel 1
-bindsym $mod+n border normal
-
-# Font for window titles. Will also be used by the bar unless a different font
-# is used in the bar {} block below.
-#font Inconsolata:monospace 8
-font pango:Noto Sans Mono 10, FontAwesome 10
-
-# This font is widely installed, provides lots of unicode glyphs, right-to-left
-# text rendering and scalability on retina/hidpi displays (thanks to pango).
-#font pango:DejaVu Sans Mono 8
-
-# Before i3 v4.8, we used to recommend this one as the default:
-# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
-# The font above is very space-efficient, that is, it looks good, sharp and
-# clear in small sizes. However, its unicode glyph coverage is limited, the old
-# X core fonts rendering does not support right-to-left and this being a bitmap
-# font, it doesn’t scale on retina/hidpi displays.
-
-# Use Mouse+$mod to drag floating windows to their wanted position
-floating_modifier $mod
-
-# start a terminal
-bindsym $mod+Return exec i3-sensible-terminal
-
-# kill focused window
-bindsym $mod+Shift+q kill
-bindsym $mod+q kill
-bindsym Mod1+F4 kill
-
-# start dmenu (a program launcher)
-#bindsym $mod+Shift+d exec dmenu_run
-# There also is the (new) i3-dmenu-desktop which only displays applications
-# shipping a .desktop file. It is a wrapper around dmenu, so you need that
-# installed.
-#bindsym $mod+Shift+d exec --no-startup-id i3-dmenu-desktop
-bindsym $mod+r exec "rofi -combi-modi window,drun,run -show combi -modi combi"
-
-# misc app shortcuts
-bindsym $mod+d exec "urxvt -title 'Hardware Diagnostics' -e hw-diags"
-bindsym $mod+f exec "thunar ~"
-bindsym $mod+i exec "hardinfo"
-bindsym $mod+m exec "urxvt -title 'Mount All Volumes' -e mount-all-volumes"
-bindsym $mod+s exec "urxvt -title 'Hardware Diagnostics' -e hw-diags foh"
-bindsym $mod+t exec "urxvt"
-bindsym $mod+v exec "urxvt -title 'Hardware Sensors' -e hw-diags-sensors"
-bindsym $mod+w exec "firefox"
-
-focus_follows_mouse no
-
-# change focus
-bindsym $mod+j focus left
-bindsym $mod+k focus down
-bindsym $mod+l focus up
-bindsym $mod+semicolon focus right
-
-# alternatively, you can use the cursor keys:
-bindsym $mod+Left focus left
-bindsym $mod+Down focus down
-bindsym $mod+Up focus up
-bindsym $mod+Right focus right
-
-# move focused window
-bindsym $mod+Shift+j move left
-bindsym $mod+Shift+k move down
-bindsym $mod+Shift+l move up
-bindsym $mod+Shift+semicolon move right
-
-# alternatively, you can use the cursor keys:
-bindsym $mod+Shift+Left move left
-bindsym $mod+Shift+Down move down
-bindsym $mod+Shift+Up move up
-bindsym $mod+Shift+Right move right
-
-# workspace back and forth (with/without active container)
-workspace_auto_back_and_forth yes
-bindsym $mod+b workspace back_and_forth
-bindsym $mod+Shift+b move container to workspace back_and_forth; workspace back_and_forth
-
-# split orientation
-bindsym $mod+Shift+h split h
-bindsym $mod+Shift+v split v
-
-# enter fullscreen mode for the focused container
-bindsym $mod+Shift+f fullscreen toggle
-
-# change container layout (stacked, tabbed, toggle split)
-bindsym $mod+Shift+s layout stacking
-bindsym $mod+Shift+w layout tabbed
-bindsym $mod+Shift+e layout toggle split
-
-# toggle tiling / floating
-bindsym $mod+Shift+space floating toggle
-
-# change focus between tiling / floating windows
-bindsym $mod+space focus mode_toggle
-
-# focus the parent container
-#bindsym $mod+a focus parent
-
-# move the currently focused window to the scratchpad
-bindsym $mod+Shift+minus move scratchpad
-
-# Show the next scratchpad window or hide the focused scratchpad window.
-# If there are multiple scratchpad windows, this command cycles through them.
-bindsym $mod+minus scratchpad show
-
-# focus the child container
-#bindsym $mod+d focus child
-
-# Workspace names
-set $ws1 "一"
-set $ws2 "二"
-set $ws3 "三"
-set $ws4 "四"
-set $ws5 "五"
-set $ws6 "六"
-set $ws7 "七"
-set $ws8 "八"
-set $ws9 "九"
-set $ws10 "十"
-
-# switch to workspace
-bindsym $mod+1 workspace $ws1
-bindsym $mod+2 workspace $ws2
-bindsym $mod+3 workspace $ws3
-bindsym $mod+4 workspace $ws4
-bindsym $mod+5 workspace $ws5
-bindsym $mod+6 workspace $ws6
-bindsym $mod+7 workspace $ws7
-bindsym $mod+8 workspace $ws8
-bindsym $mod+9 workspace $ws9
-bindsym $mod+0 workspace $ws10
-
-# move focused container to workspace
-bindsym $mod+Ctrl+1 move container to workspace $ws1
-bindsym $mod+Ctrl+2 move container to workspace $ws2
-bindsym $mod+Ctrl+3 move container to workspace $ws3
-bindsym $mod+Ctrl+4 move container to workspace $ws4
-bindsym $mod+Ctrl+5 move container to workspace $ws5
-bindsym $mod+Ctrl+6 move container to workspace $ws6
-bindsym $mod+Ctrl+7 move container to workspace $ws7
-bindsym $mod+Ctrl+8 move container to workspace $ws8
-bindsym $mod+Ctrl+9 move container to workspace $ws9
-bindsym $mod+Ctrl+0 move container to workspace $ws10
-
-# move focused container to workspace and follow
-bindsym $mod+Shift+1 move container to workspace $ws1; workspace $ws1
-bindsym $mod+Shift+2 move container to workspace $ws2; workspace $ws2
-bindsym $mod+Shift+3 move container to workspace $ws3; workspace $ws3
-bindsym $mod+Shift+4 move container to workspace $ws4; workspace $ws4
-bindsym $mod+Shift+5 move container to workspace $ws5; workspace $ws5
-bindsym $mod+Shift+6 move container to workspace $ws6; workspace $ws6
-bindsym $mod+Shift+7 move container to workspace $ws7; workspace $ws7
-bindsym $mod+Shift+8 move container to workspace $ws8; workspace $ws8
-bindsym $mod+Shift+9 move container to workspace $ws9; workspace $ws9
-bindsym $mod+Shift+0 move container to workspace $ws10; workspace $ws10
-
-# Open specific applications in floating mode
-for_window [title="Slack"] floating enable
-for_window [title="Screen Layout Editor"] floating enable
-for_window [class="Galculator"] floating enable border pixel 1
-for_window [class="Nitrogen"] floating enable sticky enable border normal
-for_window [title="Hardware Diagnostics"] floating enable
-for_window [title="Hardware Sensors"] floating enable
-for_window [title="Mount All Volumes"] floating enable
-for_window [title="Firefox"] floating enable border normal
-
-# switch to workspace with urgent window automatically
-for_window [urgent=latest] focus
-
-# reload the configuration file
-#bindsym $mod+Shift+c reload
-# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
-#bindsym $mod+Shift+r restart
-
-# resize window (you can also use the mouse for that)
-mode "resize" {
-        # These bindings trigger as soon as you enter the resize mode
-
-        # Pressing left will shrink the window’s width.
-        # Pressing right will grow the window’s width.
-        # Pressing up will shrink the window’s height.
-        # Pressing down will grow the window’s height.
-        bindsym j resize shrink width 10 px or 10 ppt
-        bindsym k resize grow height 10 px or 10 ppt
-        bindsym l resize shrink height 10 px or 10 ppt
-        bindsym semicolon resize grow width 10 px or 10 ppt
-
-        # same bindings, but for the arrow keys
-        bindsym Left resize shrink width 10 px or 10 ppt
-        bindsym Down resize grow height 10 px or 10 ppt
-        bindsym Up resize shrink height 10 px or 10 ppt
-        bindsym Right resize grow width 10 px or 10 ppt
-
-        # back to normal: Enter or Escape
-        bindsym Return mode "default"
-        bindsym Escape mode "default"
-}
-
-bindsym $mod+Shift+r mode "resize"
-
-# "System" menu
-bindsym $mod+x mode "$mode_system"
-set $mode_system (l)ock, (e)xit, (r)eboot, (s)hutdown, (c)onfig, (i)3
-mode "$mode_system" {
-        bindsym l exec --no-startup-id i3lock, mode "default"
-        bindsym e exit, mode "default"
-        bindsym r exec reboot, mode "default"
-        bindsym s exec poweroff, mode "default"
-        bindsym c reload, mode "default"
-        bindsym i restart, mode "default"
-
-        # exit system mode: "Enter" or "Escape"
-        bindsym Return mode "default"
-        bindsym Escape mode "default"
-}
-
-#############################
-### settings for i3-gaps: ###
-#############################
-
-# Set inner/outer gaps
-gaps inner 10
-gaps outer 4
-
-# Additionally, you can issue commands with the following syntax. This is useful to bind keys to changing the gap size.
-# gaps inner|outer current|all set|plus|minus <px>
-# gaps inner all set 10
-# gaps outer all plus 5
-
-# Smart gaps (gaps used if only more than one container on the workspace)
-smart_gaps on
-
-# Smart borders (draw borders around container only if it is not the only container on this workspace)
-# on|no_gaps (on=always activate and no_gaps=only activate if the gap size to the edge of the screen is 0)
-smart_borders on
-
-# Press $mod+Shift+g to enter the gap mode. Choose o or i for modifying outer/inner gaps. Press one of + / - (in-/decrement for current workspace) or 0 (remove gaps for current workspace). If you also press Shift with these keys, the change will be global for all workspaces.
-set $mode_gaps Gaps: (o) outer, (i) inner
-set $mode_gaps_outer Outer Gaps: +|-|0 (local), Shift + +|-|0 (global)
-set $mode_gaps_inner Inner Gaps: +|-|0 (local), Shift + +|-|0 (global)
-bindsym $mod+Shift+g mode "$mode_gaps"
-
-mode "$mode_gaps" {
-        bindsym o      mode "$mode_gaps_outer"
-        bindsym i      mode "$mode_gaps_inner"
-        bindsym Return mode "default"
-        bindsym Escape mode "default"
-}
-mode "$mode_gaps_inner" {
-        bindsym plus  gaps inner current plus 5
-        bindsym minus gaps inner current minus 5
-        bindsym 0     gaps inner current set 0
-
-        bindsym Shift+plus  gaps inner all plus 5
-        bindsym Shift+minus gaps inner all minus 5
-        bindsym Shift+0     gaps inner all set 0
-
-        bindsym Return mode "default"
-        bindsym Escape mode "default"
-}
-mode "$mode_gaps_outer" {
-        bindsym plus  gaps outer current plus 5
-        bindsym minus gaps outer current minus 5
-        bindsym 0     gaps outer current set 0
-
-        bindsym Shift+plus  gaps outer all plus 5
-        bindsym Shift+minus gaps outer all minus 5
-        bindsym Shift+0     gaps outer all set 0
-
-        bindsym Return mode "default"
-        bindsym Escape mode "default"
-}
-
-# Start i3bar to display a workspace bar (plus the system information i3status
-# finds out, if available)
-bar {
-        position            bottom
-        separator_symbol    " "
-        status_command      i3status
-        height              26
-}

.linux_items/archlive/airootfs/etc/skel/.config/i3status/config

@@ -1,76 +0,0 @@
-# i3status configuration file.
-# see "man i3status" for documentation.
-
-# It is important that this file is edited as UTF-8.
-# The following line should contain a sharp s:
-# ß
-# If the above line is not correctly displayed, fix your editor first!
-
-general {
-        colors = true
-        interval = 5
-}
-
-#order += "disk /"
-order += "wireless _first_"
-order += "ethernet _first_"
-order += "cpu_usage"
-order += "battery all"
-order += "volume master"
-order += "tztime local"
-#order += "tztime utc"
-
-cpu_usage {
-    format = " %usage"
-    max_threshold = 90
-    #format_above_threshold = " %usage"
-    degraded_threshold = 75
-    #format_above_degraded_threshold = " %usage"
-}
-
-wireless _first_ {
-        format_up = " (%quality at %essid) %ip"
-        format_down = " Down"
-}
-
-ethernet _first_ {
-        # if you use %speed, i3status requires root privileges
-        format_up = " %ip"
-        format_down = " Down"
-}
-
-battery all {
-        integer_battery_capacity = true
-        format = "%status %percentage"
-        format_down = ""
-        status_chr = ""
-        status_bat = ""
-        status_unk = ""
-        status_full = ""
-        path = "/sys/class/power_supply/BAT%d/uevent"
-        low_threshold = 25
-        threshold_type = percentage
-}
-
-volume master {
-        format = " %volume"
-        format_muted = " muted"
-        device = "pulse"
-}
-
-tztime local {
-        format = "%F %H:%M"
-}
-
-tztime utc {
-        format = "%H:%M"
-        timezone = "UTC"
-}
-
-load {
-        format = "%1min"
-}
-
-disk "/" {
-        format = "%avail"
-}

.linux_items/archlive/airootfs/etc/skel/.config/openbox/autostart

@@ -1,19 +0,0 @@
-#
-# These things are run when an Openbox X Session is started.
-# You may place a similar script in $HOME/.config/openbox/autostart
-# to run user-specific things.
-#
-
-# If you want to use GNOME config tools...
-#
-#if test -x /usr/lib/openbox/gnome-settings-daemon >/dev/null; then
-#  /usr/lib/openbox/gnome-settings-daemon &
-#elif which gnome-settings-daemon >/dev/null 2>&1; then
-#  gnome-settings-daemon &
-#fi
-
-# If you want to use XFCE config tools...
-#
-#xfce-mcs-manager &
-
-tint2 &

.linux_items/archlive/airootfs/etc/skel/.config/rofi/config

@@ -1,11 +0,0 @@
-! rofi theme
-rofi.color-enabled: true
-!                  bg       border   separator
-rofi.color-window: argb:d02d3036, #2d3036, #d64937
-!                  bg             fg       bg-alt   hl-bg    hl-fg
-rofi.color-normal: argb:d02d3036, #d8d8d8, argb:d02d3036, #2d3036, #d64937
-rofi.color-active: argb:d0222222, #d64937, argb:d0222222, #d64937, #d8d8d8
-rofi.color-urgent: argb:d0888888, #d8d8d8, argb:d0888888, #888888, #d64937
-
-rofi.separator-style: solid
-rofi.hide-scrollbar: true

.linux_items/archlive/airootfs/etc/skel/.conky_start

@@ -1,10 +0,0 @@
-#!/bin/bash
-
-CONKY_RC="$HOME/.conkyrc"
-if [[ -f "/run/archiso/bootmnt/arch/conky.rc" ]]; then
-    CONKY_RC="/run/archiso/bootmnt/arch/conky.rc"
-fi
-
-sleep 2s && conky -c "${CONKY_RC}" -dq
-sleep 5s && killall conky -c "${CONKY_RC}" -dq
-

.linux_items/archlive/airootfs/etc/skel/.conkyrc

@@ -1,166 +0,0 @@
-# For commands above TEXT check:
-# http://conky.sourceforge.net/config_settings.html
-#
-# For commands available below TEXT check:
-# http://conky.sourceforge.net/variables.html
-
-# Bunsen Labs Conky help threads
-# http://crunchbang.org/forums/viewtopic.php?pid=371424#p371424
-
-# beta tested by: smacz
-# Enjoy! :)
-
-# pkill -xf "conky -q -c $HOME/.config/conky/BL-Default.conkyrc" &
-###  Begin Window Settings  #####################
-own_window yes
-#own_window_type override
-own_window_transparent no
-own_window_hints undecorated,below,skip_taskbar,skip_pager,sticky
-own_window_colour 000000
-own_window_class Conky
-#own_window_title Bunsen Labs Default Conky
-own_window_title Default Conky
-
-### ARGB can be used for real transparency
-### NOTE that a composite manager is required for real transparency.
-### This option will not work as desired (in most cases) in conjunction with
-### own_window_type normal
-own_window_argb_visual yes # Options: yes or no
-
-### When ARGB visuals are enabled, this use this to modify the alpha value
-### Use: own_window_type normal
-### Use: own_window_transparent no
-### Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
-own_window_argb_value 224
-
-minimum_size 180 0  ### width | height
-maximum_width 180
-
-gap_x 20    ### left | right
-gap_y 45    ### up | down
-
-alignment tr
-#######################  End Window Settings  ###
-###  Font Settings  #############################
-# Use Xft (anti-aliased font and stuff)
-use_xft yes
-xftfont Inconsolata:bold:size=9
-#xftfont Liberation Sans:size=9
-
-# Alpha of Xft font. Must be a value at or between 1 and 0 ###
-xftalpha 1
-# Force UTF8? requires XFT ###
-override_utf8_locale yes
-
-uppercase no
-#########################  End Font Settings  ###
-###  Colour Settings  ###########################
-draw_shades no #yes
-default_shade_color 000000
-
-draw_outline no # amplifies text if yes
-default_outline_color 000000
-
-#default_color 656667 # Waldorf original colour
-#default_color 7a7a7a # Flame  & Bunsen Grey
-#default_color 929292 # Labs Grey
-default_color C0C0C0 # Silver
-color0 B0E0E6 # PowderBlue
-color1 778899 # LightSlateGray
-color2 D8BFD8 # Thistle
-color3 9ACD32 # YellowGreen
-color4 FFA07A # LightSalmon
-color5 FFDEAD # NavajoWhite
-color6 00BFFF # DeepSkyBlue
-color7 5F9EA0 # CadetBlue
-color8 BDB76B # DarkKhaki
-color9 CD5C5C # IndianRed
-#######################  End Colour Settings  ###
-###  Borders Section  ###########################
-draw_borders no
-# Stippled borders?
-stippled_borders 5
-# border margins
-border_inner_margin 5
-border_outer_margin 0
-# border width
-border_width 2
-# graph borders
-draw_graph_borders yes #no
-#default_graph_size 15 40
-#######################  End Borders Section  ###
-###  Miscellaneous Section  #####################
-# Boolean value, if true, Conky will be forked to background when started.
-background yes
-
-# Adds spaces around certain objects to stop them from moving other things
-# around, this only helps if you are using a mono font
-# Options: right, left or none
-use_spacer none
-
-# Default and Minimum size is 256 - needs more for single commands that
-# "call" a lot of text IE: bash scripts
-text_buffer_size 6144
-
-# Subtract (file system) buffers from used memory?
-no_buffers yes
-
-# change GiB to G and MiB to M
-short_units yes
-
-# Like it says, ot pads the decimals on % values
-# doesn't seem to work since v1.7.1
-pad_percents 2
-
-# Imlib2 image cache size, in bytes. Default 4MiB Increase this value if you use
-# $image lots. Set to 0 to disable the image cache.
-imlib_cache_size 0
-
-# Use the Xdbe extension? (eliminates flicker)
-# It is highly recommended to use own window with this one
-# so double buffer won't be so big.
-double_buffer yes
-
-#   Maximum size of user text buffer, i.e. layout below TEXT line in config file
-#  (default is 16384 bytes)
-# max_user_text 16384
-
-# Desired output unit of all objects displaying a temperature. Parameters are
-# either "fahrenheit" or "celsius". The default unit is degree Celsius.
-# temperature_unit Fahrenheit
-
-#################  End Miscellaneous Section  ###
-#### ${font Monospace:bold:size=10}${alignc}${execpi 600 $HOME/.config/conky/scripts/bunsenweather.sh}
-update_interval 1
-
-TEXT
-${color}${alignc}S Y S T E M    I N F O
-${hr}
-Date:${alignr}${time %F}
-Time:${alignr}${time %H:%M}
-Uptime:${alignr}${uptime_short}
-
-CPU: ${if_match ${cpu cpu0}<10}  ${cpu cpu0}\
-${else}${if_match ${cpu cpu0}<100} ${cpu cpu0}\
-${else}${cpu cpu0}${endif}${endif}% Used${alignr}${freq_g} GHz
-${cpugraph cpu0 20,180 ${color} ${color}}
-RAM: ${mem} Used${alignr}${memmax}
-${memgraph 20,180 ${color} ${color}}
-Disk I/O:
-${diskiograph 20,180 ${color} ${color}}
-Down:  ${downspeed}${goto 115}Up:${alignr}${upspeed}
-
-#Network
-
-${alignc}S H O R T C U T    K E Y S
-${hr}
-[Super] + d${alignr}HW Diagnostics
-[Super] + f${alignr}File Manager
-[Super] + i${alignr}HW Information
-[Super] + m${alignr}Mount Volumes
-[Super] + r${alignr}Run Dialog
-[Super] + s${alignr}SMART Check
-[Super] + t${alignr}Terminal
-[Super] + v${alignr}View Temps
-[Super] + w${alignr}Web Browser
-[Super] + x${alignr}Logout

.linux_items/archlive/airootfs/etc/skel/.local/share/recently-used.xbel

@@ -1,16 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<xbel version="1.0"
-      xmlns:bookmark="http://www.freedesktop.org/standards/desktop-bookmarks"
-      xmlns:mime="http://www.freedesktop.org/standards/shared-mime-info"
->
-  <bookmark href="file:///usr/share/wallpaper" added="2016-05-01T18:50:20Z" modified="2016-05-01T18:50:20Z" visited="2016-05-01T18:50:21Z">
-    <info>
-      <metadata owner="http://freedesktop.org">
-        <mime:mime-type type="inode/directory"/>
-        <bookmark:applications>
-          <bookmark:application name="xfdesktop-settings" exec="&apos;xfdesktop-settings %u&apos;" modified="2016-05-01T18:50:20Z" count="1"/>
-        </bookmark:applications>
-      </metadata>
-    </info>
-  </bookmark>
-</xbel>

.linux_items/archlive/airootfs/etc/skel/.network_start

@@ -1,4 +0,0 @@
-#!/bin/bash
-
-connect-to-network
-

.linux_items/archlive/airootfs/etc/skel/.tmux.conf

@@ -1,2 +0,0 @@
-set -g status off
-set -g pane-active-border-fg white

.linux_items/archlive/airootfs/etc/skel/.update_conky

@@ -1,12 +0,0 @@
-#!/bin/bash
-
-IF_LIST=($(ip l | egrep '^[0-9]+:\s+(eth|en|wl)' | sed -r 's/^[0-9]+:\s+(\w+):.*/\1/' | sort))
-
-
-for i in "${IF_LIST[@]}"; do
-    if [[ "${i:0:1}" == "e" ]]; then
-        sed -i -r "s/#Network/Wired:\${alignr}\${addr $i}\n#Network/" ~/.conkyrc
-    else
-        sed -i -r "s/#Network/Wireless:\${alignr}\${addr $i}\n#Network/" ~/.conkyrc
-    fi
-done

.linux_items/archlive/airootfs/etc/skel/.update_wallpaper

@@ -1,21 +0,0 @@
-#!/bin/bash
-
-BOOT_PATH="/run/archiso/bootmnt/arch/"
-BURNED_IN="/usr/share/wallpaper/burned.in"
-WALLPAPER="$HOME/.wallpaper.png"
-
-function link_wall() {
-    sudo rm "$WALLPAPER"
-    sudo ln -s "$1" "$WALLPAPER"
-}
-
-# Check for wallpaper
-## Checks BOOT_PATH and uses the BURNED_IN file if nothing is found
-for f in "$BOOT_PATH"/{Arch,arch}.{jpg,png} "$BURNED_IN"; do
-    if [[ -f "$f" ]]; then
-        link_wall "$f"
-        break
-    fi
-done
-
-feh --bg-fill "$WALLPAPER"

.linux_items/archlive/airootfs/etc/skel/.urxvt_default_res

@@ -1,10 +0,0 @@
-#!/bin/bash
-
-XWIDTH="$(xrandr 2>/dev/null | grep '*' | sed -r 's/^\s+([0-9]+)x.*/\1/')"
-XHEIGHT="$(xrandr 2>/dev/null | grep '*' | sed -r 's/^\s+[0-9]+x([0-9]+).*/\1/')"
-
-WIDTH="$(echo "${XWIDTH}*92/1024" | bc)"
-HEIGHT="$(echo "${XHEIGHT}*32/768" | bc)"
-
-sed -i -r "s/(URxvt.geometry:\s+).*/\1${WIDTH}x${HEIGHT}+24+24/" ~/.Xresources
-xrdb -merge ~/.Xresources

.linux_items/archlive/airootfs/etc/skel/.xinitrc

@@ -1,19 +0,0 @@
-#!/bin/sh
-
-dbus-update-activation-environment --systemd DISPLAY
-xrdb -merge $HOME/.Xresources
-xset s off
-xset -dpms
-eval $(ssh-agent)
-export SSH_AUTH_SOCK
-compton &
-sleep 1s
-conky -d
-nm-applet &
-cbatticon &
-pasystray &
-$HOME/.network_start &
-$HOME/.urxvt_default_res &
-$HOME/.update_wallpaper &
-$HOME/.update_conky &
-exec openbox-session

.linux_items/archlive/airootfs/etc/skel/.zlogin

@@ -1,13 +0,0 @@
-setterm -blank 0 -powerdown 0
-if [ "$(fgconsole 2>/dev/null)" -eq "1" ]; then
-    if ! fgrep -q "nox" /proc/cmdline; then
-        if fgrep -q "i3" /proc/cmdline; then
-            sed -i -r 's/#(own_window_type override)/\1/' ~/.conkyrc
-            sed -i -r 's/openbox-session/i3/' ~/.xinitrc
-        fi
-        startx
-    else
-        hw-diags cli
-    fi
-fi
-

.linux_items/archlive/airootfs/etc/skel/.zshrc

@@ -1,90 +0,0 @@
-# If you come from bash you might have to change your $PATH.
-# export PATH=$HOME/bin:/usr/local/bin:$PATH
-
-# Path to your oh-my-zsh installation.
-  export ZSH=$HOME/.oh-my-zsh
-
-# Set name of the theme to load. Optionally, if you set this to "random"
-# it'll load a random theme each time that oh-my-zsh is loaded.
-# See https://github.com/robbyrussell/oh-my-zsh/wiki/Themes
-ZSH_THEME="lean"
-
-# Uncomment the following line to use case-sensitive completion.
-# CASE_SENSITIVE="true"
-
-# Uncomment the following line to use hyphen-insensitive completion. Case
-# sensitive completion must be off. _ and - will be interchangeable.
-# HYPHEN_INSENSITIVE="true"
-
-# Uncomment the following line to disable bi-weekly auto-update checks.
-DISABLE_AUTO_UPDATE="true"
-
-# Uncomment the following line to change how often to auto-update (in days).
-# export UPDATE_ZSH_DAYS=13
-
-# Uncomment the following line to disable colors in ls.
-# DISABLE_LS_COLORS="true"
-
-# Uncomment the following line to disable auto-setting terminal title.
-# DISABLE_AUTO_TITLE="true"
-
-# Uncomment the following line to enable command auto-correction.
-# ENABLE_CORRECTION="true"
-
-# Uncomment the following line to display red dots whilst waiting for completion.
-# COMPLETION_WAITING_DOTS="true"
-
-# Uncomment the following line if you want to disable marking untracked files
-# under VCS as dirty. This makes repository status check for large repositories
-# much, much faster.
-# DISABLE_UNTRACKED_FILES_DIRTY="true"
-
-# Uncomment the following line if you want to change the command execution time
-# stamp shown in the history command output.
-# The optional three formats: "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
-HIST_STAMPS="yyyy-mm-dd"
-
-# Would you like to use another custom folder than $ZSH/custom?
-# ZSH_CUSTOM=/path/to/new-custom-folder
-
-# Which plugins would you like to load? (plugins can be found in ~/.oh-my-zsh/plugins/*)
-# Custom plugins may be added to ~/.oh-my-zsh/custom/plugins/
-# Example format: plugins=(rails git textmate ruby lighthouse)
-# Add wisely, as too many plugins slow down shell startup.
-plugins=(archlinux git sudo systemd tmux)
-source $ZSH/oh-my-zsh.sh
-
-# User configuration
-
-# export MANPATH="/usr/local/man:$MANPATH"
-
-# You may need to manually set your language environment
-# export LANG=en_US.UTF-8
-
-# Preferred editor for local and remote sessions
-# if [[ -n $SSH_CONNECTION ]]; then
-#   export EDITOR='vim'
-# else
-#   export EDITOR='mvim'
-# fi
-
-# Compilation flags
-# export ARCHFLAGS="-arch x86_64"
-
-# ssh
-# export SSH_KEY_PATH="~/.ssh/rsa_id"
-
-# Set personal aliases, overriding those provided by oh-my-zsh libs,
-# plugins, and themes. Aliases can be placed here, though oh-my-zsh
-# users are encouraged to define aliases within the ZSH_CUSTOM folder.
-# For a full list of active aliases, run `alias`.
-#
-# Example aliases
-# alias zshconfig="mate ~/.zshrc"
-# alias ohmyzsh="mate ~/.oh-my-zsh"
-
-## Load aliases
-. $HOME/.aliases
-
-## Update LS_COLORS
-eval $(dircolors ~/.dircolors)

.linux_items/archlive/airootfs/etc/systemd/system/dbus-org.freedesktop.NetworkManager.service

@@ -1 +0,0 @@
-/usr/lib/systemd/system/NetworkManager.service

.linux_items/archlive/airootfs/etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service

@@ -1 +0,0 @@
-/usr/lib/systemd/system/NetworkManager-dispatcher.service

.linux_items/archlive/airootfs/etc/systemd/system/display-manager.service

@@ -1 +0,0 @@
-/usr/lib/systemd/system/lightdm.service

.linux_items/archlive/airootfs/etc/systemd/system/getty.target.wants/getty@tty1.service

@@ -1 +0,0 @@
-/usr/lib/systemd/system/getty@.service

.linux_items/archlive/airootfs/etc/systemd/system/getty@tty1.service.d/autologin.conf

@@ -1,3 +0,0 @@
-[Service]
-ExecStart=
-ExecStart=-/sbin/agetty --autologin wktech --noclear %I 38400 linux

.linux_items/archlive/airootfs/etc/systemd/system/multi-user.target.wants/NetworkManager.service

@@ -1 +0,0 @@
-/usr/lib/systemd/system/NetworkManager.service

.linux_items/archlive/airootfs/etc/systemd/system/multi-user.target.wants/rngd.service

@@ -1 +0,0 @@
-/usr/lib/systemd/system/rngd.service

.linux_items/archlive/airootfs/etc/systemd/system/multi-user.target.wants/sshd.service

@@ -1 +0,0 @@
-/usr/lib/systemd/system/sshd.service

.linux_items/archlive/airootfs/etc/systemd/system/multi-user.target.wants/ufw.service

@@ -1 +0,0 @@
-/usr/lib/systemd/system/ufw.service

.linux_items/archlive/airootfs/etc/ufw/after.init

@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# after.init: if executable, called by ufw-init. See 'man ufw-framework' for
-#             details. Note that output from these scripts is not seen via the
-#             the ufw command, but instead via ufw-init.
-#
-# Copyright 2013 Canonical Ltd.
-#
-#    This program is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License version 3,
-#    as published by the Free Software Foundation.
-#
-#    This program is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-set -e
-
-case "$1" in
-start)
-    # typically required
-    ;;
-stop)
-    # typically required
-    ;;
-status)
-    # optional
-    ;;
-flush-all)
-    # optional
-    ;;
-*)
-    echo "'$1' not supported"
-    echo "Usage: after.init {start|stop|flush-all|status}"
-    ;;
-esac

.linux_items/archlive/airootfs/etc/ufw/after.rules

@@ -1,30 +0,0 @@
-#
-# rules.input-after
-#
-# Rules that should be run after the ufw command line added rules. Custom
-# rules should be added to one of these chains:
-#   ufw-after-input
-#   ufw-after-output
-#   ufw-after-forward
-#
-
-# Don't delete these required lines, otherwise there will be errors
-*filter
-:ufw-after-input - [0:0]
-:ufw-after-output - [0:0]
-:ufw-after-forward - [0:0]
-# End required lines
-
-# don't log noisy services by default
--A ufw-after-input -p udp --dport 137 -j ufw-skip-to-policy-input
--A ufw-after-input -p udp --dport 138 -j ufw-skip-to-policy-input
--A ufw-after-input -p tcp --dport 139 -j ufw-skip-to-policy-input
--A ufw-after-input -p tcp --dport 445 -j ufw-skip-to-policy-input
--A ufw-after-input -p udp --dport 67 -j ufw-skip-to-policy-input
--A ufw-after-input -p udp --dport 68 -j ufw-skip-to-policy-input
-
-# don't log noisy broadcast
--A ufw-after-input -m addrtype --dst-type BROADCAST -j ufw-skip-to-policy-input
-
-# don't delete the 'COMMIT' line or these rules won't be processed
-COMMIT

.linux_items/archlive/airootfs/etc/ufw/after6.rules

@@ -1,27 +0,0 @@
-#
-# rules.input-after
-#
-# Rules that should be run after the ufw command line added rules. Custom
-# rules should be added to one of these chains:
-#   ufw6-after-input
-#   ufw6-after-output
-#   ufw6-after-forward
-#
-
-# Don't delete these required lines, otherwise there will be errors
-*filter
-:ufw6-after-input - [0:0]
-:ufw6-after-output - [0:0]
-:ufw6-after-forward - [0:0]
-# End required lines
-
-# don't log noisy services by default
--A ufw6-after-input -p udp --dport 137 -j ufw6-skip-to-policy-input
--A ufw6-after-input -p udp --dport 138 -j ufw6-skip-to-policy-input
--A ufw6-after-input -p tcp --dport 139 -j ufw6-skip-to-policy-input
--A ufw6-after-input -p tcp --dport 445 -j ufw6-skip-to-policy-input
--A ufw6-after-input -p udp --dport 546 -j ufw6-skip-to-policy-input
--A ufw6-after-input -p udp --dport 547 -j ufw6-skip-to-policy-input
-
-# don't delete the 'COMMIT' line or these rules won't be processed
-COMMIT

.linux_items/archlive/airootfs/etc/ufw/applications.d/ufw-bittorent

@@ -1,19 +0,0 @@
-[Transmission]
-title=Transmission
-description=Transmission BitTorrent client
-ports=51413/tcp
-
-[Deluge]
-title=Deluge
-description=Deluge BitTorrent client
-ports=6881:6891/tcp
-
-[KTorrent]
-title=KTorrent
-description=KTorrent BitTorrent client
-ports=6881/tcp|4444/udp
-
-[qBittorrent]
-title=qBittorrent
-description=qBittorrent BitTorrent client
-ports=6881/tcp

.linux_items/archlive/airootfs/etc/ufw/applications.d/ufw-chat

@@ -1,35 +0,0 @@
-[PeopleNearby]
-title=People Nearby
-description=People Nearby (Bonjour/Salut) functionality in Empathy
-ports=5353/udp|5298
-
-[Bonjour]
-title=Bonjour
-description=Bonjour protocol
-ports=5353/udp|5298
-
-[MSN]
-title=MSN Chat
-description=MSN chat protocol (with file transfer and voice)
-ports=1863|6891:6900/tcp|6901
-
-[MSN SSL]
-title=MSN Chat (SSL)
-description=MSN chat protocol (SSL)
-ports=443/tcp
-
-[AIM]
-title=AIM Talk
-description=AIM talk protocol
-ports=5190/tcp
-
-[Yahoo]
-title=Yahoo Chat
-description=Yahoo chat protocol
-ports=5050
-
-[XMPP]
-title=XMPP Chat
-description=XMPP protocol (Jabber and Google Talk)
-ports=5222/tcp|5269/tcp
-

.linux_items/archlive/airootfs/etc/ufw/applications.d/ufw-directoryserver

@@ -1,29 +0,0 @@
-[Kerberos KDC]
-title=Kerberos v5 KDC server
-description=Kerberos v5 KDC server
-ports=88
-
-[Kerberos Admin]
-title=Kerberos v5 admin
-description=Kerberos v5 server
-ports=749/tcp
-
-[Kerberos Password]
-title=Kerberos v5 password
-description=Kerberos v5 password
-ports=464/udp
-
-[Kerberos Full]
-title=Kerberos v5 server
-description=Kerberos v5 server
-ports=88,749/tcp|464/udp
-
-[LDAP]
-title=LDAP server
-description=LDAP server
-ports=389/tcp
-
-[LDAPS]
-title=LDAP server (LDAPS)
-description=LDAP server (LDAPS)
-ports=636/tcp

.linux_items/archlive/airootfs/etc/ufw/applications.d/ufw-dnsserver

@@ -1,4 +0,0 @@
-[DNS]
-title=Internet Domain Name Server
-description=Internet Domain Name Server
-ports=53

.linux_items/archlive/airootfs/etc/ufw/applications.d/ufw-fileserver

@@ -1,14 +0,0 @@
-[CIFS]
-title=SMB/CIFS server
-description=SMB/CIFS server
-ports=137,138/udp|139,445/tcp
-
-[NFS]
-title=NFS server
-description=NFS and portmap server. Will also need access to mountd, statd and possibly others
-ports=2049,111/tcp|2049,111/udp
-
-[svnserve]
-title=Subversion server
-description=Subversion server for access to Subversion repositories.
-ports=3690/tcp

.linux_items/archlive/airootfs/etc/ufw/applications.d/ufw-loginserver

@@ -1,14 +0,0 @@
-[Telnet]
-title=Telnet server (insecure)
-description=Telnet server (insecure)
-ports=23/tcp
-
-[SSH]
-title=SSH server
-description=SSH server
-ports=22/tcp
-
-[VNC]
-title=VNC server
-description=VNC server
-ports=5900/tcp

.linux_items/archlive/airootfs/etc/ufw/applications.d/ufw-mailserver

@@ -1,30 +0,0 @@
-[POP3]
-title=Mail server (POP3)
-description=Mail server (POP3)
-ports=110/tcp
-
-[POP3S]
-title=Secure mail server (POP3S)
-description=Secure mail server (POP3S)
-ports=995/tcp
-
-[IMAP]
-title=Mail server (IMAP)
-description=Mail server (IMAP)
-ports=143/tcp
-
-[IMAPS]
-title=Secure mail server (IMAPS)
-description=Secure mail server (IMAPS)
-ports=993/tcp
-
-[SMTP]
-title=Mail server (SMTP)
-description=Mail server (SMTP)
-ports=25/tcp
-
-[Mail submission]
-title=Mail server (Submission)
-description=Mail server (Submission)
-ports=587/tcp
-

.linux_items/archlive/airootfs/etc/ufw/applications.d/ufw-printserver

@@ -1,9 +0,0 @@
-[IPP]
-title=Cups server (IPP)
-description=Cups server (IPP)
-ports=631
-
-[LPD]
-title=LPD server
-description=LPD server
-ports=515/tcp

.linux_items/archlive/airootfs/etc/ufw/applications.d/ufw-proxyserver

@@ -1,9 +0,0 @@
-[Socks]
-title=Socks proxy
-description=Socks proxy
-ports=1080/tcp
-
-[Transparent Proxy]
-title=Transparent proxy
-description=Transparent proxy
-ports=8081/tcp

.linux_items/archlive/airootfs/etc/ufw/applications.d/ufw-webserver

@@ -1,19 +0,0 @@
-[WWW]
-title=Web Server
-description=Web server
-ports=80/tcp
-
-[WWW Secure]
-title=Web Server (HTTPS)
-description=Web Server (HTTPS)
-ports=443/tcp
-
-[WWW Full]
-title=Web Server (HTTP,HTTPS)
-description=Web Server (HTTP,HTTPS)
-ports=80,443/tcp
-
-[WWW Cache]
-title=Web Server (8080)
-description=Web Server (8080)
-ports=8080/tcp

.linux_items/archlive/airootfs/etc/ufw/before.init

@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# before.init: if executable, called by ufw-init. See 'man ufw-framework' for
-#              details. Note that output from these scripts is not seen via the
-#              the ufw command, but instead via ufw-init.
-#
-# Copyright 2013 Canonical Ltd.
-#
-#    This program is free software: you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License version 3,
-#    as published by the Free Software Foundation.
-#
-#    This program is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-set -e
-
-case "$1" in
-start)
-    # typically required
-    ;;
-stop)
-    # typically required
-    ;;
-status)
-    # optional
-    ;;
-flush-all)
-    # optional
-    ;;
-*)
-    echo "'$1' not supported"
-    echo "Usage: before.init {start|stop|flush-all|status}"
-    ;;
-esac

.linux_items/archlive/airootfs/etc/ufw/before.rules

@@ -1,77 +0,0 @@
-#
-# rules.before
-#
-# Rules that should be run before the ufw command line added rules. Custom
-# rules should be added to one of these chains:
-#   ufw-before-input
-#   ufw-before-output
-#   ufw-before-forward
-#
-
-# Don't delete these required lines, otherwise there will be errors
-*filter
-:ufw-before-input - [0:0]
-:ufw-before-output - [0:0]
-:ufw-before-forward - [0:0]
-:ufw-not-local - [0:0]
-# End required lines
-
-
-# allow all on loopback
--A ufw-before-input -i lo -j ACCEPT
--A ufw-before-output -o lo -j ACCEPT
-
-# quickly process packets for which we already have a connection
--A ufw-before-input -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
--A ufw-before-output -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
--A ufw-before-forward -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-
-# drop INVALID packets (logs these in loglevel medium and higher)
--A ufw-before-input -m conntrack --ctstate INVALID -j ufw-logging-deny
--A ufw-before-input -m conntrack --ctstate INVALID -j DROP
-
-# ok icmp codes for INPUT
--A ufw-before-input -p icmp --icmp-type destination-unreachable -j ACCEPT
--A ufw-before-input -p icmp --icmp-type source-quench -j ACCEPT
--A ufw-before-input -p icmp --icmp-type time-exceeded -j ACCEPT
--A ufw-before-input -p icmp --icmp-type parameter-problem -j ACCEPT
--A ufw-before-input -p icmp --icmp-type echo-request -j ACCEPT
-
-# ok icmp code for FORWARD
--A ufw-before-forward -p icmp --icmp-type destination-unreachable -j ACCEPT
--A ufw-before-forward -p icmp --icmp-type source-quench -j ACCEPT
--A ufw-before-forward -p icmp --icmp-type time-exceeded -j ACCEPT
--A ufw-before-forward -p icmp --icmp-type parameter-problem -j ACCEPT
--A ufw-before-forward -p icmp --icmp-type echo-request -j ACCEPT
-
-# allow dhcp client to work
--A ufw-before-input -p udp --sport 67 --dport 68 -j ACCEPT
-
-#
-# ufw-not-local
-#
--A ufw-before-input -j ufw-not-local
-
-# if LOCAL, RETURN
--A ufw-not-local -m addrtype --dst-type LOCAL -j RETURN
-
-# if MULTICAST, RETURN
--A ufw-not-local -m addrtype --dst-type MULTICAST -j RETURN
-
-# if BROADCAST, RETURN
--A ufw-not-local -m addrtype --dst-type BROADCAST -j RETURN
-
-# all other non-local packets are dropped
--A ufw-not-local -m limit --limit 3/min --limit-burst 10 -j ufw-logging-deny
--A ufw-not-local -j DROP
-
-# allow MULTICAST mDNS for service discovery (be sure the MULTICAST line above
-# is uncommented)
--A ufw-before-input -p udp -d 224.0.0.251 --dport 5353 -j ACCEPT
-
-# allow MULTICAST UPnP for service discovery (be sure the MULTICAST line above
-# is uncommented)
--A ufw-before-input -p udp -d 239.255.255.250 --dport 1900 -j ACCEPT
-
-# don't delete the 'COMMIT' line or these rules won't be processed
-COMMIT

.linux_items/archlive/airootfs/etc/ufw/before6.rules

@@ -1,138 +0,0 @@
-#
-# rules.before
-#
-# Rules that should be run before the ufw command line added rules. Custom
-# rules should be added to one of these chains:
-#   ufw6-before-input
-#   ufw6-before-output
-#   ufw6-before-forward
-#
-
-# Don't delete these required lines, otherwise there will be errors
-*filter
-:ufw6-before-input - [0:0]
-:ufw6-before-output - [0:0]
-:ufw6-before-forward - [0:0]
-# End required lines
-
-
-# allow all on loopback
--A ufw6-before-input -i lo -j ACCEPT
--A ufw6-before-output -o lo -j ACCEPT
-
-# drop packets with RH0 headers
--A ufw6-before-input -m rt --rt-type 0 -j DROP
--A ufw6-before-forward -m rt --rt-type 0 -j DROP
--A ufw6-before-output -m rt --rt-type 0 -j DROP
-
-# quickly process packets for which we already have a connection
--A ufw6-before-input -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
--A ufw6-before-output -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
--A ufw6-before-forward -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-
-# drop INVALID packets (logs these in loglevel medium and higher)
--A ufw6-before-input -m conntrack --ctstate INVALID -j ufw6-logging-deny
--A ufw6-before-input -m conntrack --ctstate INVALID -j DROP
-
-# ok icmp codes for INPUT (rfc4890, 4.4.1 and 4.4.2)
--A ufw6-before-input -p icmpv6 --icmpv6-type destination-unreachable -j ACCEPT
--A ufw6-before-input -p icmpv6 --icmpv6-type packet-too-big -j ACCEPT
-# codes 0 and 1
--A ufw6-before-input -p icmpv6 --icmpv6-type time-exceeded -j ACCEPT
-# codes 0-2
--A ufw6-before-input -p icmpv6 --icmpv6-type parameter-problem -j ACCEPT
--A ufw6-before-input -p icmpv6 --icmpv6-type echo-request -j ACCEPT
--A ufw6-before-input -p icmpv6 --icmpv6-type echo-reply -j ACCEPT
--A ufw6-before-input -p icmpv6 --icmpv6-type router-solicitation -m hl --hl-eq 255 -j ACCEPT
--A ufw6-before-input -p icmpv6 --icmpv6-type router-advertisement -m hl --hl-eq 255 -j ACCEPT
--A ufw6-before-input -p icmpv6 --icmpv6-type neighbor-solicitation -m hl --hl-eq 255 -j ACCEPT
--A ufw6-before-input -p icmpv6 --icmpv6-type neighbor-advertisement -m hl --hl-eq 255 -j ACCEPT
-# IND solicitation
--A ufw6-before-input -p icmpv6 --icmpv6-type 141 -m hl --hl-eq 255 -j ACCEPT
-# IND advertisement
--A ufw6-before-input -p icmpv6 --icmpv6-type 142 -m hl --hl-eq 255 -j ACCEPT
-# MLD query
--A ufw6-before-input -p icmpv6 --icmpv6-type 130 -s fe80::/10 -j ACCEPT
-# MLD report
--A ufw6-before-input -p icmpv6 --icmpv6-type 131 -s fe80::/10 -j ACCEPT
-# MLD done
--A ufw6-before-input -p icmpv6 --icmpv6-type 132 -s fe80::/10 -j ACCEPT
-# MLD report v2
--A ufw6-before-input -p icmpv6 --icmpv6-type 143 -s fe80::/10 -j ACCEPT
-# SEND certificate path solicitation
--A ufw6-before-input -p icmpv6 --icmpv6-type 148 -m hl --hl-eq 255 -j ACCEPT
-# SEND certificate path advertisement
--A ufw6-before-input -p icmpv6 --icmpv6-type 149 -m hl --hl-eq 255 -j ACCEPT
-# MR advertisement
--A ufw6-before-input -p icmpv6 --icmpv6-type 151 -s fe80::/10 -m hl --hl-eq 1 -j ACCEPT
-# MR solicitation
--A ufw6-before-input -p icmpv6 --icmpv6-type 152 -s fe80::/10 -m hl --hl-eq 1 -j ACCEPT
-# MR termination
--A ufw6-before-input -p icmpv6 --icmpv6-type 153 -s fe80::/10 -m hl --hl-eq 1 -j ACCEPT
-
-# ok icmp codes for OUTPUT (rfc4890, 4.4.1 and 4.4.2)
--A ufw6-before-output -p icmpv6 --icmpv6-type destination-unreachable -j ACCEPT
--A ufw6-before-output -p icmpv6 --icmpv6-type packet-too-big -j ACCEPT
-# codes 0 and 1
--A ufw6-before-output -p icmpv6 --icmpv6-type time-exceeded -j ACCEPT
-# codes 0-2
--A ufw6-before-output -p icmpv6 --icmpv6-type parameter-problem -j ACCEPT
--A ufw6-before-input -p icmpv6 --icmpv6-type echo-request -j ACCEPT
--A ufw6-before-input -p icmpv6 --icmpv6-type echo-reply -j ACCEPT
--A ufw6-before-output -p icmpv6 --icmpv6-type router-solicitation -m hl --hl-eq 255 -j ACCEPT
--A ufw6-before-output -p icmpv6 --icmpv6-type neighbor-advertisement -m hl --hl-eq 255 -j ACCEPT
--A ufw6-before-output -p icmpv6 --icmpv6-type neighbor-solicitation -m hl --hl-eq 255 -j ACCEPT
--A ufw6-before-output -p icmpv6 --icmpv6-type router-advertisement -m hl --hl-eq 255 -j ACCEPT
-# IND solicitation
--A ufw6-before-output -p icmpv6 --icmpv6-type 141 -m hl --hl-eq 255 -j ACCEPT
-# IND advertisement
--A ufw6-before-output -p icmpv6 --icmpv6-type 142 -m hl --hl-eq 255 -j ACCEPT
-# MLD query
--A ufw6-before-output -p icmpv6 --icmpv6-type 130 -s fe80::/10 -j ACCEPT
-# MLD report
--A ufw6-before-output -p icmpv6 --icmpv6-type 131 -s fe80::/10 -j ACCEPT
-# MLD done
--A ufw6-before-output -p icmpv6 --icmpv6-type 132 -s fe80::/10 -j ACCEPT
-# MLD report v2
--A ufw6-before-output -p icmpv6 --icmpv6-type 143 -s fe80::/10 -j ACCEPT
-# SEND certificate path solicitation
--A ufw6-before-output -p icmpv6 --icmpv6-type 148 -m hl --hl-eq 255 -j ACCEPT
-# SEND certificate path advertisement
--A ufw6-before-output -p icmpv6 --icmpv6-type 149 -m hl --hl-eq 255 -j ACCEPT
-# MR advertisement
--A ufw6-before-output -p icmpv6 --icmpv6-type 151 -s fe80::/10 -m hl --hl-eq 1 -j ACCEPT
-# MR solicitation
--A ufw6-before-output -p icmpv6 --icmpv6-type 152 -s fe80::/10 -m hl --hl-eq 1 -j ACCEPT
-# MR termination
--A ufw6-before-output -p icmpv6 --icmpv6-type 153 -s fe80::/10 -m hl --hl-eq 1 -j ACCEPT
-
-# ok icmp codes for FORWARD (rfc4890, 4.3.1)
--A ufw6-before-forward -p icmpv6 --icmpv6-type destination-unreachable -j ACCEPT
--A ufw6-before-forward -p icmpv6 --icmpv6-type packet-too-big -j ACCEPT
-# codes 0 and 1
--A ufw6-before-forward -p icmpv6 --icmpv6-type time-exceeded -j ACCEPT
-# codes 0-2
--A ufw6-before-forward -p icmpv6 --icmpv6-type parameter-problem -j ACCEPT
--A ufw6-before-forward -p icmpv6 --icmpv6-type echo-request -j ACCEPT
--A ufw6-before-forward -p icmpv6 --icmpv6-type echo-reply -j ACCEPT
-# ok icmp codes for FORWARD (rfc4890, 4.3.2)
-# Home Agent Address Discovery Reques
--A ufw6-before-input -p icmpv6 --icmpv6-type 144 -j ACCEPT
-# Home Agent Address Discovery Reply
--A ufw6-before-input -p icmpv6 --icmpv6-type 145 -j ACCEPT
-# Mobile Prefix Solicitation
--A ufw6-before-input -p icmpv6 --icmpv6-type 146 -j ACCEPT
-# Mobile Prefix Advertisement
--A ufw6-before-input -p icmpv6 --icmpv6-type 147 -j ACCEPT
-
-# allow dhcp client to work
--A ufw6-before-input -p udp -s fe80::/10 --sport 547 -d fe80::/10 --dport 546 -j ACCEPT
-
-# allow MULTICAST mDNS for service discovery
--A ufw6-before-input -p udp -d ff02::fb --dport 5353 -j ACCEPT
-
-# allow MULTICAST UPnP for service discovery
--A ufw6-before-input -p udp -d ff02::f --dport 1900 -j ACCEPT
-
-# don't delete the 'COMMIT' line or these rules won't be processed
-COMMIT

.linux_items/archlive/airootfs/etc/ufw/sysctl.conf

@@ -1,57 +0,0 @@
-#
-# Configuration file for setting network variables. Please note these settings
-# override /etc/sysctl.conf. If you prefer to use /etc/sysctl.conf, please
-# adjust IPT_SYSCTL in /etc/default/ufw.
-#
-
-# Uncomment this to allow this host to route packets between interfaces
-#net/ipv4/ip_forward=1
-#net/ipv6/conf/default/forwarding=1
-#net/ipv6/conf/all/forwarding=1
-
-# Turn on Source Address Verification in all interfaces to prevent some
-# spoofing attacks
-net/ipv4/conf/default/rp_filter=1
-net/ipv4/conf/all/rp_filter=1
-
-# Do not accept IP source route packets (we are not a router)
-net/ipv4/conf/default/accept_source_route=0
-net/ipv4/conf/all/accept_source_route=0
-net/ipv6/conf/default/accept_source_route=0
-net/ipv6/conf/all/accept_source_route=0
-
-# Disable ICMP redirects. ICMP redirects are rarely used but can be used in
-# MITM (man-in-the-middle) attacks. Disabling ICMP may disrupt legitimate
-# traffic to those sites.
-net/ipv4/conf/default/accept_redirects=0
-net/ipv4/conf/all/accept_redirects=0
-net/ipv6/conf/default/accept_redirects=0
-net/ipv6/conf/all/accept_redirects=0
-
-# Ignore bogus ICMP errors
-net/ipv4/icmp_echo_ignore_broadcasts=1
-net/ipv4/icmp_ignore_bogus_error_responses=1
-net/ipv4/icmp_echo_ignore_all=0
-
-# Don't log Martian Packets (impossible packets)
-net/ipv4/conf/default/log_martians=0
-net/ipv4/conf/all/log_martians=0
-
-# Change to '1' to enable TCP/IP SYN cookies This disables TCP Window Scaling
-# (http://lkml.org/lkml/2008/2/5/167)
-net/ipv4/tcp_syncookies=0
-
-#net/ipv4/tcp_fin_timeout=30
-#net/ipv4/tcp_keepalive_intvl=1800
-
-# normally allowing tcp_sack is ok, but if going through OpenBSD 3.8 RELEASE or
-# earlier pf firewall, should set this to 0
-net/ipv4/tcp_sack=1
-
-# Uncomment this to turn off ipv6 autoconfiguration
-#net/ipv6/conf/default/autoconf=0
-#net/ipv6/conf/all/autoconf=0
-
-# Uncomment this to enable ipv6 privacy addressing
-#net/ipv6/conf/default/use_tempaddr=2
-#net/ipv6/conf/all/use_tempaddr=2

.linux_items/archlive/airootfs/etc/xdg/xfce4/kiosk/kioskrc

@@ -1,3 +0,0 @@
-[xfce4-session]
-SaveSession=None
-

.linux_items/archlive/airootfs/root/.automated_script.sh

@@ -1,34 +0,0 @@
-#!/bin/bash
-
-script_cmdline ()
-{
-    local param
-    for param in $(< /proc/cmdline); do
-        case "${param}" in
-            script=*) echo "${param#*=}" ; return 0 ;;
-        esac
-    done
-}
-
-automated_script ()
-{
-    local script rt
-    script="$(script_cmdline)"
-    if [[ -n "${script}" && ! -x /tmp/startup_script ]]; then
-        if [[ "${script}" =~ ^http:// || "${script}" =~ ^ftp:// ]]; then
-            wget "${script}" --retry-connrefused -q -O /tmp/startup_script >/dev/null
-            rt=$?
-        else
-            cp "${script}" /tmp/startup_script
-            rt=$?
-        fi
-        if [[ ${rt} -eq 0 ]]; then
-            chmod +x /tmp/startup_script
-            /tmp/startup_script
-        fi
-    fi
-}
-
-if [[ $(tty) == "/dev/tty1" ]]; then
-    automated_script
-fi

.linux_items/archlive/airootfs/root/.zlogin

@@ -1 +0,0 @@
-~/.automated_script.sh

.linux_items/archlive/airootfs/root/customize_airootfs.sh

@@ -1,72 +0,0 @@
-#!/bin/bash
-
-set -e -u
-
-# Set hostname
-echo "[customize_airootfs] INFO: Set hostname"
-echo "wk-arch" > /etc/hostname
-echo "127.0.1.1      wk-arch.localdomain     wk-arch" >> /etc/hosts
-
-# Set locale
-echo "[customize_airootfs] INFO: Set locale"
-sed -i 's/#\(en_US\.UTF-8\)/\1/' /etc/locale.gen
-locale-gen
-
-# Time Settings
-echo "[customize_airootfs] INFO: Set time"
-ln -sf /usr/share/zoneinfo/America/Los_Angeles /etc/localtime
-sed -i 's/#FallbackNTP/NTP/' /etc/systemd/timesyncd.conf
-#timedatectl set-ntp true
-
-# root user settings
-echo "[customize_airootfs] INFO: Setup root user"
-usermod -s /usr/bin/zsh root
-cp -aT /etc/skel/ /root/
-rm /root/.ssh/id*
-rm /root/.zlogin
-chmod 700 /root
-echo "root:Abracadabra" | chpasswd
-
-# wktech user settings
-echo "[customize_airootfs] INFO: Setup wktech user"
-groupadd -r autologin
-useradd -m -s /bin/zsh -G autologin,power,storage,wheel -U wktech
-echo "wktech:Abracadabra" | chpasswd
-
-# Enable sudo for %wheel
-echo "[customize_airootfs] INFO: Enable sudo"
-echo '%wheel ALL=(ALL) NOPASSWD: ALL' >> /etc/sudoers
-
-# Misc
-echo "[customize_airootfs] INFO: Misc Settings"
-#sed -i -r 's/extensions.autoDisableScopes", [0-9]+/extensions.autoDisableScopes", 0/' /usr/lib/firefox/browser/defaults/preferences/vendor.js
-mkdir /media
-
-# Set mirrorlist
-echo "[customize_airootfs] INFO: Setup pacman mirrorlist"
-# Ranked on 2017-10-19
-echo 'Server = http://mirrors.cat.pdx.edu/archlinux/$repo/os/$arch' > /etc/pacman.d/mirrorlist
-echo 'Server = http://mirrors.advancedhosters.com/archlinux/$repo/os/$arch' >> /etc/pacman.d/mirrorlist
-echo 'Server = http://archlinux.surlyjake.com/archlinux/$repo/os/$arch' >> /etc/pacman.d/mirrorlist
-echo 'Server = http://mirrors.acm.wpi.edu/archlinux/$repo/os/$arch' >> /etc/pacman.d/mirrorlist
-echo 'Server = https://archlinux.surlyjake.com/archlinux/$repo/os/$arch' >> /etc/pacman.d/mirrorlist
-echo 'Server = http://ca.us.mirror.archlinux-br.org/$repo/os/$arch' >> /etc/pacman.d/mirrorlist
-echo 'Server = https://arlm.tyzoid.com/$repo/os/$arch' >> /etc/pacman.d/mirrorlist
-echo 'Server = http://mirror.rackspace.com/archlinux/$repo/os/$arch' >> /etc/pacman.d/mirrorlist
-echo 'Server = http://il.us.mirror.archlinux-br.org/$repo/os/$arch' >> /etc/pacman.d/mirrorlist
-
-# journald settings (from archiso)
-echo "[customize_airootfs] INFO: Setup journald"
-sed -i 's/#\(Storage=\)auto/\1volatile/' /etc/systemd/journald.conf
-
-# logind settings (from archiso)
-echo "[customize_airootfs] INFO: Setup logind"
-sed -i 's/#\(HandleSuspendKey=\)suspend/\1ignore/' /etc/systemd/logind.conf
-sed -i 's/#\(HandleHibernateKey=\)hibernate/\1ignore/' /etc/systemd/logind.conf
-sed -i 's/#\(HandleLidSwitch=\)suspend/\1ignore/' /etc/systemd/logind.conf
-
-echo "[customize_airootfs] INFO: Setup systemd"
-#systemctl enable pacman-init.service choose-mirror.service
-#systemctl set-default graphical.target
-
-echo "[customize_airootfs] INFO: Completed."

.linux_items/archlive/airootfs/root/install.txt

@@ -1,3 +0,0 @@
-View this installation guide online at
-https://wiki.archlinux.org/index.php/Installation_Guide
-

.linux_items/archlive/airootfs/usr/local/bin/arch.conf

@@ -1,44 +0,0 @@
-## WK-Arch Settings ##
-
-# Backup options
-declare -a BACKUP_1=(
-    "ServerOne"                  # Server name
-    "10.0.0.10"                # IP
-    "Backups"                   # Share name
-    "backup"                    # User name
-    "Abracadabra"               # Password
-)
-declare -a BACKUP_2=(
-    "ServerTwo"                    # Server name
-    "10.0.0.11"                # IP
-    "Backups"                   # Share name
-    "backup"                    # User name
-    "Abracadabra"               # Password
-)
-declare -a BACKUP_3=(
-    ""                          # Server name
-    ""                          # IP
-    ""                          # Share name
-    ""                          # User name
-    ""                          # Password
-)
-declare -a BACKUP_4=(
-    ""                          # Server name
-    ""                          # IP
-    ""                          # Share name
-    ""                          # User name
-    ""                          # Password
-)
-
-# Hardware testing options
-TEST_CPU_LENGTH="7"             # Time in minutes to run Prime95
-
-# Network options
-WIFI_SSID="SomeWiFi"           # Use the 2.4Ghz network for better compatability
-WIFI_PASS="Abracadabra"          
-
-# Results upload options
-SKIP_UPLOAD="False"             # Set to "True" to disable all uploads
-DIAG_SERVER="10.0.0.10"        # Use the IP and not the server name
-DIAG_SHARE="/srv/ClientInfo"    # Full path to shared folder (relative to the server's root)
-DIAG_USER="wkdiag"              # User used to connect to the server via SSH

.linux_items/archlive/airootfs/usr/local/bin/connect-to-network

@@ -1,64 +0,0 @@
-#!/bin/bash
-#
-## Get connected to a network
-
-# 1. Checks if already online; skips if so
-# 2. If no wired devices are present then reload kernel modules
-# 3. If wireless devices are present, and we're still offline, then connect to WiFi
-
-die () {
-    echo "$0:" "$@" >&2
-    exit 1
-}
-
-function test_connection() {
-    if ip a | grep -Eq '(10.[0-9]+|172.(1[6-9]|2[0-9]|3[0-1]).[0-9]+|192.168).[0-9]+.[0-9]+'; then
-        return 0
-    else
-        return 1
-    fi
-}
-
-# Load settings
-if [[ -f "/run/archiso/bootmnt/arch/arch.conf" ]]; then
-    source "/run/archiso/bootmnt/arch/arch.conf" || \
-        die "ERROR: failed to load arch.conf (from /run/archiso/bootmnt/arch/)"
-else
-    source "/usr/local/bin/arch.conf" || \
-        die "ERROR: failed to load arch.conf (from /usr/local/bin/)"
-fi
-
-# Init
-WIFI_SSID="${WIFI_SSID}"
-WIFI_PASS="${WIFI_PASS}"
-
-# Connect to network
-if ! test_connection; then
-    # LAN
-    if ! ip l | grep -Eq '[0-9]+: +en'; then
-        ## Reload the tg3/broadcom driver (known fix for some Dell systems)
-        echo "No wired network adapters found; reloading drivers..."
-        sudo modprobe -r tg3
-        sudo modprobe broadcom
-        sudo modprobe tg3
-        sleep 5s
-    fi
-    
-    # WiFi
-    if ip l | grep -Eq '[0-9]+: +wl'; then
-        ## Skip if we're already connected (i.e. the code above worked)
-        if ! test_connection; then
-            echo "Attempting to connect to ${WIFI_SSID}..."
-            nmcli dev wifi connect "${WIFI_SSID}" password "${WIFI_PASS}"
-            sleep 5s
-        fi
-    fi
-fi
-
-# Done
-if test_connection; then
-    exit 0
-else
-    exit 1
-fi
-

.linux_items/archlive/airootfs/usr/local/bin/hw-diags

@@ -1,135 +0,0 @@
-#!/bin/bash
-#
-## WK HW diagnostics - Launcher
-
-MODE="$1"
-SHOW_MENU="True"
-if [[ "$MODE" =~ ^(all|cpu|drives|foh|smart|badblocks)$ ]]; then
-    SHOW_MENU="False"
-fi
-
-SHOW_POWEROPTIONS="False"
-if [[ "$MODE" =~ ^cli$ ]]; then
-    SHOW_POWEROPTIONS="True"
-fi
-
-function pause() {
-    # Pause to review output
-    echo ""
-    echo "$1"
-    read
-}
-
-function menu() {
-    while :; do
-        if [[ "$SHOW_MENU" == "False" ]]; then
-            break
-        else
-            clear
-            echo "Hardware Diagnostics"
-            echo "────────────────────"
-            echo "0: Quick drive test"
-            echo "1: All tests"
-            echo "2: Prime95"
-            echo "3: SMART & badblocks"
-            echo "4: SMART"
-            echo "5: badblocks"
-            echo "────────────────────"
-            #if [[ -n $DISPLAY ]] && [[ $(getconf LONG_BIT) -eq "64" ]]; then
-            #    echo "6: Graphics Test - FurMark"
-            #    echo "7: Graphics Test - Piano"
-            #    echo "8: Graphics Test - Volplosion"
-            #fi
-            echo "A: Speaker Test"
-            if [[ -n $DISPLAY ]]; then
-                echo "K: Keyboard Test"
-            fi
-            echo "N: Network Test"
-            echo "────────────────────"
-            echo "M: Screen Saver - Matrix"
-            echo "P: Screen Saver - Pipes"
-            echo "────────────────────"
-            echo "Q: Quit"
-        if [[ "$SHOW_POWEROPTIONS" =~ ^True$ ]]; then
-            echo "R: Reboot"
-            echo "S: Shutdown"
-        fi
-            echo ""
-            read -r -p "Please make a selection: " MODE
-            
-            # Check input
-            case $MODE in
-                0)
-                    MODE=foh
-                    break;;
-                1)
-                    MODE=all
-                    break;;
-                2)
-                    MODE=cpu
-                    break;;
-                3)
-                    MODE=drives
-                    break;;
-                4)
-                    MODE=smart
-                    break;;
-                5)
-                    MODE=badblocks
-                    break;;
-                #6)
-                #    if [[ -n $DISPLAY ]] && [[ $(getconf LONG_BIT) -eq "64" ]]; then
-                #        gputest /fullscreen /test=fur
-                #    fi
-                #    ;;
-                #7)
-                #    if [[ -n $DISPLAY ]] && [[ $(getconf LONG_BIT) -eq "64" ]]; then
-                #        gputest /fullscreen /test=pixmark_piano
-                #    fi
-                #    ;;
-                #8)
-                #    if [[ -n $DISPLAY ]] && [[ $(getconf LONG_BIT) -eq "64" ]]; then
-                #        gputest /fullscreen /test=pixmark_volplosion
-                #    fi
-                #    ;;
-                a|A|audio|Audio)
-                    clear
-                    hw-diags-audio
-                    pause "Press Enter to return to menu...";;
-                k|K|keyboard|Keyboard)
-                    if [[ -n $DISPLAY ]]; then
-                        xev
-                    fi
-                    ;;
-                m|M)
-                    cmatrix -abs
-                    reset
-                    clear;;
-                n|N)
-                    clear
-                    hw-diags-network
-                    pause "Press Enter to return to menu...";;
-                p|P)
-                    pipes -t 0 -t 1 -t 2 -t 3 -p 5 -R -r 4000
-                    reset
-                    clear;;
-                q|Q|quit|Quit)
-                    exit 0;;
-                r|R)
-                    sudo reboot;;
-                s|S)
-                    sudo poweroff;;
-            esac
-        fi
-    done
-}
-
-# Main Loop
-while :; do
-    menu
-    tmux new-session -s 'hw-session' -n 'hw-window' "hw-diags-inner $MODE"
-    if [[ "$SHOW_MENU" == "False" ]]; then
-        break
-    fi
-done
-

.linux_items/archlive/airootfs/usr/local/bin/hw-diags-audio

@@ -1,12 +0,0 @@
-#!/bin/bash
-#
-## WK HW diagnostics - Audio (Stereo)
-
-# Unmute and set volume
-amixer -q set "Master" 80% unmute
-amixer -q set "PCM" 90% unmute
-
-speaker-test -c 2 -l 1 -t pink
-# speaker-test -c 2 -l 1 -t sine
-speaker-test -c 2 -l 1 -t wav
-

.linux_items/archlive/airootfs/usr/local/bin/hw-diags-badblocks

@@ -1,25 +0,0 @@
-#!/bin/bash
-#
-## WK HW diagnostics - badblocks
-
-function usage {
-    echo "Usage: $0 log-dir device"
-    echo "  e.g. $0 /tmp/tmp.7Mh5f1RhSL9001 /dev/sda"
-}
-
-# Bail early
-if [ ! -d "$1" ]; then
-    usage
-    exit 1
-fi
-if [ ! -b "$2" ]; then
-    usage
-    exit 1
-fi
-
-# Run Badblocks
-sudo badblocks -sv -e 1 "$2"
-tmux capture-pane
-tmux save-buffer "$1/bb_tmp.out"
-grep -Ev '^$' "$1/bb_tmp.out" > "$1/${2##*/}_badblocks.log"
-rm "$1/bb_tmp.out"

.linux_items/archlive/airootfs/usr/local/bin/hw-diags-inner

@@ -1,518 +0,0 @@
-#!/bin/bash
-#
-## WK HW Diagnostics - Main script
-
-die () {
-    echo "$0:" "$@" >&2
-    exit 1
-}
-
-# Load settings
-if [[ -f "/run/archiso/bootmnt/arch/arch.conf" ]]; then
-    source "/run/archiso/bootmnt/arch/arch.conf" || \
-        die "ERROR: failed to load arch.conf (from /run/archiso/bootmnt/arch/)"
-else
-    source "/usr/local/bin/arch.conf" || \
-        die "ERROR: failed to load arch.conf (from /usr/local/bin/)"
-fi
-
-# Get TICKET
-## Inital SKIP_UPLOAD value loaded from arch.conf
-SKIP_UPLOAD="${SKIP_UPLOAD}"
-TICKET=""
-while [[ "$TICKET" == "" ]]; do
-    if [[ "$1" == "foh" ]]; then
-        TICKET="foh-consult"
-        SKIP_UPLOAD="True"
-    else
-        echo -n "Please enter the Service Order #: "
-        read -r _ticket
-        if echo "$_ticket" | grep -Eq '^[1-9]+\S*$'; then
-            TICKET="$_ticket"
-        elif echo "$_ticket" | grep -Eq '^0'; then
-            SKIP_UPLOAD="True"
-            TICKET="$_ticket"
-        fi
-    fi
-done
-
-# Init
-## Tautologies left to show which settings are coming from arch.conf
-DIAG_DATE="$(date "+%F_%H%M")"
-DIAG_SERVER_AVAIL="False"
-DIAG_SERVER="${DIAG_SERVER}"
-DIAG_SHARE="${DIAG_SHARE}"
-DIAG_DEST="${DIAG_SHARE}/${TICKET}"
-DIAG_UPLOAD_NAME="HW-Diagnostics_${DIAG_DATE}"
-DIAG_USER="${DIAG_USER}"
-TMP_DIR="$(mktemp -d)"
-ERRORS="False"
-TEST_CPU="False"
-TEST_CPU_LENGTH="${TEST_CPU_LENGTH}"
-TEST_OVER="False"
-TEST_SMART="False"
-TEST_BADBLOCKS="False"
-SKIP_SHORT_TEST="False"
-LOG="$TMP_DIR/hw-diags.log"
-OUT="$TMP_DIR/hw-diags.out"
-
-# Get list of drives to test (excluding any ARCH drives)
-
-## Some code borrowed from stackoverflow.com/a/10020397
-ARCH_DRIVES=($(ls -l /dev/disk/by-label | grep -iE 'ARCH.*[hs]d[a-z]' | sed -r 's#.*/([hs]d[a-z])[0-9]+#\1#' | sort | uniq))
-DRIVES=($(inxi -Dxx -c 0 | grep -E "ID-[0-9]+" | sed -r 's#.*/dev/([hsv]d[a-z]|nvme[0-9]n[0-9]).*#\1#' | sort))
-for d in "${ARCH_DRIVES[@]}"; do
-    DRIVES=(${DRIVES[@]//*$d*})
-done
-
-# Handle testing runs
-if [[ "$SKIP_UPLOAD" != "True" ]]; then
-    # Connect to network
-    connect-to-network
-
-    # Test connection to DIAG_SERVER
-    if ip a | grep -Eq '(10.[0-9]+|172.(1[6-9]|2[0-9]|3[0-1])|192.168).[0-9]+.[0-9]+' && \
-    ping -c 1 -q $DIAG_SERVER >/dev/null 2>&1; then
-        DIAG_SERVER_AVAIL="True"
-        ssh-add
-        ssh $DIAG_USER@$DIAG_SERVER mkdir -p "$DIAG_DEST"
-        ssh $DIAG_USER@$DIAG_SERVER chmod 755 "$DIAG_DEST"
-    fi
-fi
-
-# Setup Env
-mkdir "$TMP_DIR" -p 2>/dev/null
-pushd "$TMP_DIR" >/dev/null
-touch "$OUT"
-rm local.txt results.txt 2>/dev/null
-
-# Functions
-CLEAR="\e[0m"
-RED="\e[31m"
-GREEN="\e[32m"
-YELLOW="\e[33m"
-BLUE="\e[34m"
-function update_progress {
-    echo "HW  Diagnostics" > "$LOG"
-    echo "${BLUE}HW  Diagnostics${CLEAR}" > "$OUT"
-    echo "───────────────" >> "$LOG"
-    echo "───────────────" >> "$OUT"
-
-    if [[ "$TEST_CPU" == "True" ]]; then
-        echo "" >> "$LOG"
-        echo "" >> "$OUT"
-        if [[ "$cpu_result" == "CS" ]]; then
-            echo "Prime95      CS" >> "$LOG"
-            echo "${BLUE}Prime95${CLEAR}      ${GREEN}CS${CLEAR}" >> "$OUT"
-        elif [[ "$cpu_result" == "Working" ]]; then
-            echo "Prime95 Working" >> "$LOG"
-            echo "${BLUE}Prime95${CLEAR} ${YELLOW}Working${CLEAR}" >> "$OUT"
-        elif [[ "$cpu_result" == "Unknown" ]]; then
-            echo "Prime95 Unknown" >> "$LOG"
-            echo "${BLUE}Prime95${CLEAR} ${YELLOW}Unknown${CLEAR}" >> "$OUT"
-        else
-            echo "Prime95      NS" >> "$LOG"
-            echo "${BLUE}Prime95${CLEAR}      ${RED}NS${CLEAR}" >> "$OUT"
-        fi
-    fi
-
-    if [[ "$TEST_SMART" == "True" ]]; then
-        echo "" >> "$LOG"
-        echo "" >> "$OUT"
-        if [[ "$SKIP_SHORT_TEST" == "True" ]]; then
-            echo "SMART (Quick)" >> "$LOG"
-            echo "${BLUE}SMART${CLEAR} ${YELLOW}(Quick)${CLEAR}" >> "$OUT"
-        else
-            echo "SMART" >> "$LOG"
-            echo "${BLUE}SMART${CLEAR}" >> "$OUT"
-        fi
-        for d in "${DRIVES[@]}"; do
-            d_tmp="${d##*/}_smart_result"
-            eval "d_tmp=\$$d_tmp"
-            if [[ "$d_tmp" == "CS" ]]; then
-                echo "${d##*/}          CS" >> "$LOG"
-                echo "${d##*/}          ${GREEN}CS${CLEAR}" >> "$OUT"
-            elif [[ "$d_tmp" == "Working" ]]; then
-                echo "${d##*/}     Working" >> "$LOG"
-                echo "${d##*/}     ${YELLOW}Working${CLEAR}" >> "$OUT"
-            elif [[ "$d_tmp" == "Unknown" ]]; then
-                echo "${d##*/}     Unknown" >> "$LOG"
-                echo "${d##*/}     ${YELLOW}Unknown${CLEAR}" >> "$OUT"
-            elif [[ "$d_tmp" == "NS" ]]; then
-                echo "${d##*/}          NS" >> "$LOG"
-                echo "${d##*/}          ${RED}NS${CLEAR}" >> "$OUT"
-            else
-                echo "${d##*/}" >> "$LOG"
-                echo "${d##*/}" >> "$OUT"
-            fi
-        done
-    fi
-
-    if [[ "$TEST_BADBLOCKS" == "True" ]]; then
-        echo "" >> "$LOG"
-        echo "" >> "$OUT"
-        echo "Badblocks" >> "$LOG"
-        echo "${BLUE}Badblocks${CLEAR}" >> "$OUT"
-        for d in "${DRIVES[@]}"; do
-            d_tmp="${d##*/}_badblocks_result"
-            eval "d_tmp=\$$d_tmp"
-            if [[ "$d_tmp" == "CS" ]]; then
-                echo "${d##*/}          CS" >> "$LOG"
-                echo "${d##*/}          ${GREEN}CS${CLEAR}" >> "$OUT"
-            elif [[ "$d_tmp" == "Working" ]]; then
-                echo "${d##*/}     Working" >> "$LOG"
-                echo "${d##*/}     ${YELLOW}Working${CLEAR}" >> "$OUT"
-            elif [[ "$d_tmp" == "Skipped" ]]; then
-                echo "${d##*/}     Skipped" >> "$LOG"
-                echo "${d##*/}     ${RED}Skipped${CLEAR}" >> "$OUT"
-            elif [[ "$d_tmp" == "NS" ]]; then
-                echo "${d##*/}          NS" >> "$LOG"
-                echo "${d##*/}          ${RED}NS${CLEAR}" >> "$OUT"
-            else
-                echo "${d##*/}" >> "$LOG"
-                echo "${d##*/}" >> "$OUT"
-            fi
-        done
-    fi
-
-    if [[ "$TEST_OVER" == "True" ]]; then
-        echo "" >> "$LOG"
-        echo "" >> "$OUT"
-        echo "───────────────" >> "$LOG"
-        echo "───────────────" >> "$OUT"
-
-        if [[ "$ERRORS" == "True" ]]; then
-            echo "HW:    Error(s)" >> "$LOG"
-            echo "${RED}HW:    Error(s)${CLEAR}" >> "$OUT"
-        else
-            echo "HW:      Passed" >> "$LOG"
-            echo "${GREEN}HW:      Passed${CLEAR}" >> "$OUT"
-        fi
-    fi
-
-    # Update Server
-    if [[ "$DIAG_SERVER_AVAIL" == "True" ]]; then
-        rsync -aqz --chmod=Du=rwx,Dgo=rx,Fu=rw,Fgo=r "$TMP_DIR/" $DIAG_USER@$DIAG_SERVER:"$DIAG_DEST/${DIAG_UPLOAD_NAME}/" --exclude '*.out'
-    fi
-}
-
-# Select Tests
-case "$1" in
-    all)
-        TEST_CPU="True"
-        TEST_SMART="True"
-        TEST_BADBLOCKS="True"
-        ;;
-    cpu)
-        TEST_CPU="True"
-        TEST_SMART="False"
-        TEST_BADBLOCKS="False"
-        ;;
-    drives)
-        TEST_CPU="False"
-        TEST_SMART="True"
-        TEST_BADBLOCKS="True"
-        ;;
-    foh)
-        TEST_CPU="False"
-        TEST_SMART="True"
-        TEST_BADBLOCKS="False"
-        SKIP_SHORT_TEST="True"
-        ;;
-    smart)
-        TEST_CPU="False"
-        TEST_SMART="True"
-        TEST_BADBLOCKS="False"
-        ;;
-    badblocks)
-        TEST_CPU="False"
-        TEST_SMART="False"
-        TEST_BADBLOCKS="True"
-        ;;
-esac
-
-if [[ "$TEST_CPU" == "False" ]] && \
-    [[ "$TEST_SMART" == "False" ]] && \
-    [[ "$TEST_BADBLOCKS" == "False" ]]; then
-    echo -e "${YELLOW}Aborting HW diagnostics${CLEAR}"
-    exit 1
-fi
-
-# Configure display
-tmux split-window -d -h -l 16 "hw-diags-progress $OUT"
-update_progress
-
-# CPU
-if [[ "$TEST_CPU" == "True" ]]; then
-    clear
-    CPU_ERRORS="False"
-    cpu_result="Working"
-    update_progress
-    apple_fans max
-    (sleep ${TEST_CPU_LENGTH}m && killall -s INT "mprime" >>/dev/null 2>&1) &
-    (sleep ${TEST_CPU_LENGTH}m && killall "hw-diags-sensors" >>/dev/null 2>&1) &
-    (sleep ${TEST_CPU_LENGTH}m && apple_fans auto >>/dev/null 2>&1) &
-    tmux split-window -d -v -l 10 "hw-diags-prime95 $TMP_DIR"
-    hw-diags-sensors "$TMP_DIR" 2>/dev/null
-    sleep 1s
-    # tmux kill-pane -t 1
-    if [[ -f "results.txt" ]]; then
-        mv -nv results.txt "prime-results.txt"
-        if grep -q -iE '(error|fail)' "prime-results.txt"; then
-            cpu_result="NS"
-            CPU_ERRORS="True"
-        else
-            cpu_result="CS"
-        fi
-    elif [[ -f "prime.log" ]]; then
-        if grep -i 'completed' "prime.log" | grep -q -iv '0 errors, 0 warnings'; then
-            cpu_result="NS"
-            CPU_ERRORS="True"
-        else
-            cpu_result="CS"
-        fi
-    else
-        CPU_ERRORS="True"
-        cpu_result="Unknown"
-    fi
-
-    update_progress
-
-    if [[ "$CPU_ERRORS" == "True" ]]; then
-        ERRORS="True"
-    fi
-fi
-
-# SMART
-if [[ "$TEST_SMART" == "True" ]]; then
-    clear
-    echo "Checking SMART status..."
-    for d in "${DRIVES[@]}"; do
-        SMART_ERRORS="False"
-        tmp_device="${d##*/}"
-        eval "${tmp_device}_smart_result=Working"
-        inxi -Dxx | grep "/dev/${tmp_device}" | sed -r "s#.*/dev/${tmp_device} (.*)#  \1#" > "${tmp_device}_report.out"
-        inxi -Dxxc 0 | grep "/dev/${tmp_device}" | sed -r "s#.*/dev/${tmp_device} (.*)#  \1#" > "${tmp_device}_report.log"
-        update_progress
-
-        # Attempt to enable SMART reporting
-        if sudo smartctl -s on "/dev/${tmp_device}" | grep -q 'device lacks SMART capability'; then
-            SMART_ERRORS="True"
-            eval "${tmp_device}_smart_result=Unknown"
-            echo "  ${RED}ERROR: device lacks SMART capability${CLEAR}" >> "${tmp_device}_report.out"
-            echo "  ERROR: device lacks SMART capability" >> "${tmp_device}_report.log"
-            sleep 1s
-        fi
-
-        # Save current SMART values
-        sudo smartctl --all "/dev/${tmp_device}" >> "${tmp_device}-smart.log"
-        sudo smartctl -l error "/dev/${tmp_device}" >> "${tmp_device}-smart-err.log"
-
-        # Check specific SMART results
-        sudo smartctl -A "/dev/${tmp_device}" | grep -E '^\s*(5|9|184|197|198)\s' >> "${tmp_device}-smart-attributes.log"
-
-        #   5 - Reallocated Sectors
-        if grep -qE '^\s*5\s' "${tmp_device}-smart-attributes.log"; then
-            line="$(grep -E '^\s*5\s' "${tmp_device}-smart-attributes.log")"
-            value=$(echo "$line" | sed -r 's/.*\s([0-9]+).*/\1/')
-            echo "  Reallocated Sectors: $value" >> "${tmp_device}_report.log"
-            if [[ "$value" -gt 0 ]]; then
-                SMART_ERRORS="True"
-                echo "  ${RED}Reallocated Sectors: $value${CLEAR}" >> "${tmp_device}_report.out"
-            else
-                echo "  ${GREEN}Reallocated Sectors: $value${CLEAR}" >> "${tmp_device}_report.out"
-            fi
-        fi
-
-        #   9 - Power-on Hours (Warn, but don't prevent badblock scan)
-        if grep -qE '^\s*9\s' "${tmp_device}-smart-attributes.log"; then
-            line="$(grep -E '^\s*9\s' "${tmp_device}-smart-attributes.log")"
-            value=$(echo "$line" | sed -r 's/.*\s([0-9]+).*/\1/')
-            echo "  Power-on Hours: $value" >> "${tmp_device}_report.log"
-            if [[ "$value" -gt 18000 ]]; then
-                #SMART_ERRORS="True"
-                echo "  ${RED}Power-on Hours: $value (VERY OLD)${CLEAR}" >> "${tmp_device}_report.out"
-            elif [[ "$value" -gt 12000 ]]; then
-                echo "  ${YELLOW}Power-on Hours: $value${CLEAR}" >> "${tmp_device}_report.out"
-            else
-                echo "  ${GREEN}Power-on Hours: $value${CLEAR}" >> "${tmp_device}_report.out"
-            fi
-        fi
-
-        # 184 - End-to-End Errors
-        if grep -qE '^\s*184\s' "${tmp_device}-smart-attributes.log"; then
-            line="$(grep -E '^\s*184\s' "${tmp_device}-smart-attributes.log")"
-            value=$(echo "$line" | sed -r 's/.*\s([0-9]+).*/\1/')
-            echo "  End-to-End Errors: $value" >> "${tmp_device}_report.log"
-            if [[ "$value" -gt 0 ]]; then
-                SMART_ERRORS="True"
-                echo "  ${RED}End-to-End Errors: $value${CLEAR}" >> "${tmp_device}_report.out"
-            else
-                echo "  ${GREEN}End-to-End Errors: $value${CLEAR}" >> "${tmp_device}_report.out"
-            fi
-        fi
-
-        # 197 - Current Pending Sectors
-        if grep -qE '^\s*197\s' "${tmp_device}-smart-attributes.log"; then
-            line="$(grep -E '^\s*197\s' "${tmp_device}-smart-attributes.log")"
-            value=$(echo "$line" | sed -r 's/.*\s([0-9]+).*/\1/')
-            echo "  Current Pending Sectors: $value" >> "${tmp_device}_report.log"
-            if [[ "$value" -gt 0 ]]; then
-                SMART_ERRORS="True"
-                echo "  ${RED}Current Pending Sectors: $value${CLEAR}" >> "${tmp_device}_report.out"
-            else
-                echo "  ${GREEN}Current Pending Sectors: $value${CLEAR}" >> "${tmp_device}_report.out"
-            fi
-        fi
-
-        # 198 - Offline Uncorrectable
-        if grep -qE '^\s*198\s' "${tmp_device}-smart-attributes.log"; then
-            line="$(grep -E '^\s*198\s' "${tmp_device}-smart-attributes.log")"
-            value=$(echo "$line" | sed -r 's/.*\s([0-9]+).*/\1/')
-            echo "  Offline Uncorrectable: $value" >> "${tmp_device}_report.log"
-            if [[ "$value" -gt 0 ]]; then
-                SMART_ERRORS="True"
-                echo "  ${RED}Offline Uncorrectable: $value${CLEAR}" >> "${tmp_device}_report.out"
-            else
-                echo "  ${GREEN}Offline Uncorrectable: $value${CLEAR}" >> "${tmp_device}_report.out"
-            fi
-        fi
-
-        if [[ "$SMART_ERRORS" == "False" ]] && [[ "$SKIP_SHORT_TEST" == "False" ]]; then
-            if sudo smartctl -c "/dev/${tmp_device}" >>/dev/null 2>&1; then
-                # Determine short-test polling time
-                wait_time=$(sudo smartctl -c "/dev/${tmp_device}" | grep -i 'polling time' | head -1 | sed -r 's/.*\( *([0-9]+)\).*/\1/')
-                wait_time=$(( wait_time + 5))
-
-                # Run short self-test
-                echo "  Running SMART short self-test ($wait_time minutes)..."
-                sudo smartctl -t short "/dev/${tmp_device}" >/dev/null
-                sleep ${wait_time}m
-                sudo smartctl -l selftest "/dev/${tmp_device}" >> "${tmp_device}-smart-tests.log"
-                if grep '^#' "${tmp_device}-smart-tests.log" | head -1 | grep -iq 'completed without error'; then
-                    echo "  ${GREEN}Self-test: passed${CLEAR}" >> "${tmp_device}_report.out"
-                    echo "  Self-test: passed" >> "${tmp_device}_report.log"
-                else
-                    echo "  ${RED}Self-test: failed${CLEAR}" >> "${tmp_device}_report.out"
-                    echo "  Self-test: failed" >> "${tmp_device}_report.log"
-                    SMART_ERRORS="True"
-                fi
-            else
-                echo "  ${RED}ERROR: Unable to run SMART self-test.${CLEAR}" >> "${tmp_device}_report.out"
-                echo "  ERROR: Unable to run SMART self-test." >> "${tmp_device}_report.log"
-            fi
-        fi
-
-        if [[ "$SMART_ERRORS" == "False" ]]; then
-            eval "${tmp_device}_smart_result=CS"
-        else
-            ERRORS="True"
-            tmp_if="${tmp_device}_smart_result"
-            eval "tmp_if=\$$tmp_if"
-            if [[ "$tmp_if" != "Unknown" ]]; then
-                eval "${tmp_device}_smart_result=NS"
-            fi
-        fi
-
-        update_progress
-    done
-fi
-
-# Badblocks
-if [[ "$TEST_BADBLOCKS" == "True" ]]; then
-    clear
-    for d in "${DRIVES[@]}"; do
-        # Get SMART results
-        tmp_device="${d##*/}"
-        d_smart="${tmp_device}_smart_result"
-        eval "d_smart=\$$d_smart"
-
-        # Check SMART results
-        if [[ "$d_smart" == "NS" ]]; then
-            echo -e "${RED}Skipping drive: $tmp_device${CLEAR}"
-            eval "${tmp_device}_badblocks_result=Skipped"
-        else
-            eval "${tmp_device}_badblocks_result=Working"
-            update_progress
-            echo "Testing drive: ${tmp_device}"
-
-            # Split and run
-            tmux split-window -v -l 7 "hw-diags-badblocks $TMP_DIR /dev/${tmp_device}"
-
-            # Wait until done
-            sleep 2s
-            while pgrep -G 0 -U 0 -f "badblocks.*${tmp_device}" >/dev/null 2>&1; do
-                sleep 1s;
-            done
-            sleep 2s
-
-            # Check log
-            if grep -Eiq 'Pass completed.*0/0/0 errors' "${tmp_device}_badblocks.log"; then
-                eval "${tmp_device}_badblocks_result=CS"
-            else
-                eval "${tmp_device}_badblocks_result=NS"
-            fi
-            update_progress
-        fi
-    done
-fi
-
-# Result Screen
-TEST_OVER="True"
-update_progress
-clear
-echo "─── RESULTS ───"
-if [[ "$TEST_CPU" == "True" ]]; then
-    echo -e "${BLUE}CPU:${CLEAR}"
-    if [[ -f "results.txt" ]]; then
-        echo "results.txt"
-        if grep -q -iE '(error|fail)' "prime-results.txt"; then
-            echo -e "${RED}$(grep -q -iE '(error|fail)' "prime-results.txt" | sed -r 's/^/  /' | tail -4)${CLEAR}"
-        else
-            sed -r 's/^/  /' "prime-results.txt" 2>/dev/null | tail -4
-        fi
-        echo ""
-    fi
-    if [[ -f "prime.log" ]]; then
-        echo "prime.log"
-        if grep -i 'completed' "prime.log" | grep -q -iv '0 errors, 0 warnings'; then
-            echo -e "${RED}$(grep -i 'completed' "prime.log" | grep -iv '0 errors, 0 warnings' | sed -r 's/^/  /' | tail -4)${CLEAR}"
-        else
-            grep -i 'completed' "prime.log" | grep -i '0 errors, 0 warnings' | sed -r 's/^.*(Worker #[0-9]+).*(Torture.*)/  \1 \2/' | tail -4
-        fi
-    fi
-fi
-if [[ "$TEST_SMART" == "True" ]] || \
-   [[ "$TEST_BADBLOCKS" == "True" ]]; then
-    for d in "${DRIVES[@]}"; do
-        echo -e "${BLUE}Drive $d:${CLEAR}"
-        if [[ -f "${d##*/}_report.out" ]]; then
-            echo -e "$(cat "${d##*/}_report.out" 2>/dev/null)"
-        fi
-        if [[ -f "${d##*/}_badblocks.log" ]]; then
-            grep 'Pass completed, ' "${d##*/}_badblocks.log" 2>/dev/null | sed -r 's/^Pass completed, /  /' 2>/dev/null
-        fi
-        echo ""
-    done
-fi
-update_progress
-
-# System info dump
-sudo inxi -CDdGlMmNopRsc 0 | grep -Ev '(/dev/ram|No RAID devices|Display Server|multisession)' > "system_info.txt"
-
-# Cleanup
-mkdir "$HOME/Tickets/$TICKET" -p 2>/dev/null
-rsync -aS --chmod=Du=rwx,Dgo=rx,Fu=rw,Fgo=r "$TMP_DIR/" "$HOME/Tickets/$TICKET/"
-popd >/dev/null
-cd "$HOME/Tickets" && tar czf "${DIAG_UPLOAD_NAME}.tgz" "$TICKET"
-
-# Update Server
-if [[ "$DIAG_SERVER_AVAIL" == "True" ]]; then
-    rsync -aqz --chmod=Du=rwx,Dgo=rx,Fu=rw,Fgo=r "${DIAG_UPLOAD_NAME}.tgz" $DIAG_USER@$DIAG_SERVER:"$DIAG_DEST/"
-fi
-
-# End
-echo -n "Press Enter to exit..."
-read -r
-killall hw-diags-progress >>/dev/null 2>&1
-exit 0

.linux_items/archlive/airootfs/usr/local/bin/hw-diags-network

@@ -1,73 +0,0 @@
-#!/bin/bash
-#
-## WK HW diagnostics - Network
-
-function test_connection() {
-    cmd="a"
-    if [[ -e "/sys/class/net/$1" ]]; then
-        cmd="a show $1"
-    fi
-    if ip $cmd | grep -Eq '(10.[0-9]+|172.(1[6-9]|2[0-9]|3[0-1]).[0-9]+|192.168).[0-9]+.[0-9]+'; then
-        return 0
-    else
-        return 1
-    fi
-}
-
-
-CLEAR="\e[0m"
-RED="\e[31m"
-GREEN="\e[32m"
-YELLOW="\e[33m"
-BLUE="\e[34m"
-
-# Header
-echo "WK HW Diagnostics - Network"
-echo ""
-
-# Start Wifi if necessary
-echo "Initializing..."
-connect-to-network >/dev/null 2>&1
-
-# Check network connection
-echo -n "Network connection:  "
-if test_connection; then
-    echo -e "${GREEN}OK${CLEAR}"
-else
-    echo -e "${RED}No access${CLEAR}"
-    exit 1
-fi
-
-# Check IP addresses
-for d in /sys/class/net/*; do
-    device="$(basename $d)"
-    if [ "$device" != "lo" ]; then
-        if test_connection $device; then
-            ip="$(ip a show $device | egrep 'inet [0-9]' | sed -r 's#.*inet (.*?/[0-9]+).*#\1#')"
-            echo "$device: $ip" | awk '{printf "    %-16s %s\n", $1, $2}'
-        fi
-    fi
-done
-
-# Check internet connection
-echo -n "Internet connection: "
-if ping -c 2 -q 8.8.8.8 >/dev/null 2>&1; then
-    echo -e "${GREEN}OK${CLEAR}"
-else
-    echo -e "${RED}No access${CLEAR}"
-    exit 1
-fi
-
-# Check DNS
-echo -n "DNS Resolution:      "
-if ping -c 2 -q google.com >/dev/null 2>&1; then
-    echo -e "${GREEN}OK${CLEAR}"
-else
-    echo -e "${RED}Unable to resolve google.com${CLEAR}"
-    exit 1
-fi
-
-# Check speed
-echo "Speedtest:"
-speedtest-cli --simple | awk '{printf "    %-16s %6.2f %s\n", $1, $2, $3}'
-

.linux_items/archlive/airootfs/usr/local/bin/hw-diags-prime95

@@ -1,17 +0,0 @@
-#!/bin/bash
-#
-## HW diagnostics - Prime95
-
-function usage {
-    echo "Usage: $0 log-dir"
-    echo "  e.g. $0 /tmp/tmp.7Mh5f1RhSL9001"
-}
-
-# Bail early
-if [ ! -d "$1" ]; then
-    usage
-    exit 1
-fi
-
-# Run Prime95
-mprime -t | grep -iv --line-buffered 'stress.txt' | tee -a "$1/prime.log"

.linux_items/archlive/airootfs/usr/local/bin/hw-diags-progress

@@ -1,10 +0,0 @@
-#!/bin/bash
-#
-## WK HW diagnostics - Progress
-
-# Loop forever
-while :; do
-    clear
-    echo -e "$(cat "$1")"
-    sleep 1s
-done

.linux_items/archlive/airootfs/usr/local/bin/hw-diags-sensors

@@ -1,42 +0,0 @@
-#!/bin/bash
-#
-## WK HW diagnostics - Sensors
-
-LOG_DIR="$1"
-
-function usage {
-    echo "Usage: $0 log-dir"
-    echo "  e.g. $0 /tmp/tmp.7Mh5f1RhSL9001"
-}
-
-# Create directory if necessary
-if [ ! -d "$LOG_DIR" ]; then
-    LOG_DIR="$(mktemp -d)"
-fi
-
-# Run Sensor loop
-if sensors >/dev/null 2>&1; then
-    while :; do
-        sensors -A | grep -E -i -v '(N/A|RPM|\d+\s+V\s+|^\s*$)' > "$LOG_DIR/sensors.out" 2>/dev/null
-        
-        # Colorize
-        # Blue: All temps (superseeded by other colors below)
-        sed -i -r 's#(\+[0-9]+\.[0-9].C)#\\e[34m\1\\e[0m#g' "$LOG_DIR/sensors.out" >/dev/null 2>&1
-        # Green >= 60* C
-        sed -i -r 's#(\+6[0-9]\.[0-9].C)#\\e[32m\1\\e[0m#g' "$LOG_DIR/sensors.out" >/dev/null 2>&1
-        # Yellow >= 70* C
-        sed -i -r 's#(\+7[0-9]\.[0-9].C)#\\e[33m\1\\e[0m#g' "$LOG_DIR/sensors.out" >/dev/null 2>&1
-        # Orange >= 80* C
-        sed -i -r 's#(\+(8[0-9]|9[0-4])\.[0-9].C)#\\e[31\;1m\1\\e[0m#g' "$LOG_DIR/sensors.out" >/dev/null 2>&1
-        # Red >= 95* C
-        sed -i -r 's#(\+(9[5-9]|1[0-9][0-9])\.[0-9].C)#\\e[31m\1\\e[0m#g' "$LOG_DIR/sensors.out" >/dev/null 2>&1
-        
-        # Output data
-        clear
-        echo -e "$(cat "$LOG_DIR/sensors.out")"
-        sleep 1s
-    done
-else
-    echo -e "\e[33mNo sensors found!\nPlease monitor temperatures manually\e[0m"
-    sleep 1h
-fi

.linux_items/archlive/airootfs/usr/local/bin/mount-all-volumes

@@ -1,28 +0,0 @@
-#!/bin/bash
-#
-## Mount all volumes read-only
-
-# Mount all volumes
-echo "Mounting all volumes"
-regex="/dev/((h|s)d[a-z]|md)[0-9]+"
-for volume in $(inxi -Dopxx | grep -E "$regex" | sed -r "s#.*($regex).*#\1#" | sort); do
-    if grep -q "$volume" /proc/mounts; then
-        if ! mount | grep "/run/archiso/bootmnt" | grep -q "$volume"; then
-            # Show what's already mounted except the WK_ARCH boot device
-            echo "$volume: (Already) mounted $(mount | grep "$volume" | sed -r 's/^\S+ (on.*) type .*/\1/') ($(df -h "$volume" | tail -1 | awk '{print $3, $4}' | sed -r 's/(K|M|G|T|) (.*[0-9])(K|M|G|T|)$/ \1b used, \2 \3b free/'))"
-        fi
-    else
-        if udevil mount -o ro $volume >/dev/null 2>&1; then
-            echo "$volume: Mounted $(mount | grep "$volume" | sed -r 's/^\S+ (on.*) type .*/\1/') ($(df -h "$volume" | tail -1 | awk '{print $3, $4}' | sed -r 's/(K|M|G|T|) (.*[0-9])(K|M|G|T|)$/ \1b used, \2 \3b free/'))"
-        else
-            echo "$volume: Failed to mount"
-        fi
-    fi
-done
-
-# Open folder?
-if echo "$0" | grep -iq foh; then
-    thunar /media
-fi
-
-echo "Done."

.linux_items/archlive/airootfs/usr/local/bin/mount-all-volumes-foh

@@ -1 +0,0 @@
-mount-all-volumes

.linux_items/archlive/airootfs/usr/local/bin/mount-backup-shares

@@ -1,67 +0,0 @@
-#!/bin/bash
-#
-## Mount NAS backup shares
-
-die () {
-    echo "$0:" "$@" >&2
-    exit 1
-}
-
-# Load settings
-if [[ -f "/run/archiso/bootmnt/arch/arch.conf" ]]; then
-    source "/run/archiso/bootmnt/arch/arch.conf" || \
-    die "ERROR: failed to load arch.conf (from /run/archiso/bootmnt/arch/)"
-else
-    source "/usr/local/bin/arch.conf" || \
-    die "ERROR: failed to load arch.conf (from /usr/local/bin/)"
-fi
-
-# Connect to a network
-connect-to-network
-
-# Mount loop
-echo "Mounting NAS backup shares"
-for x in {1..4}; do
-    _skip="False"
-    
-    # Load Backup share info
-    eval "declare -a _backup=(\${BACKUP_$x[@]})"
-    _name="${_backup[0]}"
-    _ip="${_backup[1]}"
-    _share="${_backup[2]}"
-    _user="${_backup[3]}"
-    _pass="${_backup[4]}"
-
-    # Check backup share info
-    if echo "$_name" | grep -Eq '^\s*$'; then
-        _skip="True";
-    fi
-    if echo "$_ip" | grep -Eq '^\s*$'; then
-        _skip="True";
-    fi
-    if echo "$_share" | grep -Eq '^\s*$'; then
-        _skip="True";
-    fi
-    if echo "$_user" | grep -Eq '^\s*$'; then
-        _skip="True";
-    fi
-    if echo "$_pass" | grep -Eq '^\s*$'; then
-        _skip="True";
-    fi
-
-    # Mount
-    if [[ "$_skip" == "False" ]]; then
-        sudo mkdir "/Backups/$_name" -p
-        if mountpoint -q "/Backups/$_name"; then
-            echo "$_name: (Already) mounted at /Backups/$_name ($(df -h "/Backups/$_name" | tail -1 | awk '{print $4}' | sed -r 's/([KMGT])/ \1b/') free)"
-        else
-            if sudo mount "//$_ip/$_share" "/Backups/$_name" -o username=$_user,password=$_pass 2>/dev/null; then
-                echo "$_name: Mounted at /Backups/$_name ($(df -h "/Backups/$_name" | tail -1 | awk '{print $4}' | sed -r 's/([KMGT])/ \1b/') free)"
-            else
-                rmdir "/Backups/$_name" -p 2>/dev/null
-                echo "$_name: Failed to mount"
-            fi
-        fi
-    fi
-done
-

.linux_items/archlive/airootfs/usr/local/bin/msword-search

@@ -1,38 +0,0 @@
-#!/bin/bash
-
-TMP_FILE="$(mktemp)"
-
-IFS=$'\n'
-for s in $*; do
-    REGEX="$s"
-    REGEX=$(echo "$REGEX" | sed -r 's/\s+/\\s\*/g')
-    
-    # Word Doc
-    for d in *doc; do
-        if antiword "$d" | grep -iqsP "($REGEX)"; then
-            echo "Possible match: $d"
-            echo "$d" >> "$TMP_FILE"
-        fi
-    done
-    
-    # Word Docx
-    for d in *docx; do
-        if unzip -p "$d" word/document.xml | grep -iqsP "($REGEX)"; then
-            echo "Possible match: $d"
-            echo "$d" >> "$TMP_FILE"
-        fi
-    done
-
-done
-
-# Cleanup results
-if [[ -s "$TMP_FILE" ]]; then
-    sort -u "$TMP_FILE" >> "$HOME/msword-matches.txt"
-fi
-rm "$TMP_FILE"
-
-# Done
-if [[ -s "$HOME/msword-matches.txt" ]]; then
-    echo "Found $(wc -l "$HOME/msword-matches.txt") possible matches"
-    echo "The results have been saved to $HOME"
-fi

.linux_items/archlive/airootfs/usr/local/bin/wifi.conf

@@ -1,9 +0,0 @@
-ctrl_interface=/var/run/wpa_supplicant
-eapol_version=1
-ap_scan=1
-fast_reauth=1
-network={
-    ssid="SomeWiFi"
-    psk="Abracadabra"
-    priority=5
-}

.linux_items/archlive/airootfs/usr/share/applications/SpeedTest.desktop

@@ -1,10 +0,0 @@
-[Desktop Entry]
-Version=1.0
-Type=Application
-Name=SpeedTest
-Comment=
-Exec=urxvt -titile SpeedTest -hold -e speedtest
-Icon=network-workgroup
-Path=/usr/local/bin
-Terminal=false
-StartupNotify=false

.linux_items/archlive/extra/arch/arch.conf

@@ -1,44 +0,0 @@
-## WK-Arch Settings ##
-
-# Backup options
-declare -a BACKUP_1=(
-    "ServerOne"                  # Server name
-    "10.0.0.10"                # IP
-    "Backups"                   # Share name
-    "backup"                    # User name
-    "Abracadabra"               # Password
-)
-declare -a BACKUP_2=(
-    "ServerTwo"                    # Server name
-    "10.0.0.11"                # IP
-    "Backups"                   # Share name
-    "backup"                    # User name
-    "Abracadabra"               # Password
-)
-declare -a BACKUP_3=(
-    ""                          # Server name
-    ""                          # IP
-    ""                          # Share name
-    ""                          # User name
-    ""                          # Password
-)
-declare -a BACKUP_4=(
-    ""                          # Server name
-    ""                          # IP
-    ""                          # Share name
-    ""                          # User name
-    ""                          # Password
-)
-
-# Hardware testing options
-TEST_CPU_LENGTH="7"             # Time in minutes to run Prime95
-
-# Network options
-WIFI_SSID="SomeWiFi"           # Use the 2.4Ghz network for better compatability
-WIFI_PASS="Abracadabra"          
-
-# Results upload options
-SKIP_UPLOAD="False"             # Set to "True" to disable all uploads
-DIAG_SERVER="10.0.0.10"        # Use the IP and not the server name
-DIAG_SHARE="/srv/ClientInfo"    # Full path to shared folder (relative to the server's root)
-DIAG_USER="wkdiag"              # User used to connect to the server via SSH

.linux_items/archlive/extra/arch/conky.rc

@@ -1,165 +0,0 @@
-# For commands above TEXT check:
-# http://conky.sourceforge.net/config_settings.html
-#
-# For commands available below TEXT check:
-# http://conky.sourceforge.net/variables.html
-
-# Bunsen Labs Conky help threads
-# http://crunchbang.org/forums/viewtopic.php?pid=371424#p371424
-
-# beta tested by: smacz
-# Enjoy! :)
-
-# pkill -xf "conky -q -c $HOME/.config/conky/BL-Default.conkyrc" &
-###  Begin Window Settings  #####################
-own_window yes
-own_window_type normal
-own_window_transparent no
-own_window_hints undecorated,below,skip_taskbar,skip_pager,sticky
-own_window_colour 000000
-own_window_class Conky
-#own_window_title Bunsen Labs Default Conky
-own_window_title Default Conky
-
-### ARGB can be used for real transparency
-### NOTE that a composite manager is required for real transparency.
-### This option will not work as desired (in most cases) in conjunction with
-### own_window_type normal
-own_window_argb_visual yes # Options: yes or no
-
-### When ARGB visuals are enabled, this use this to modify the alpha value
-### Use: own_window_type normal
-### Use: own_window_transparent no
-### Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
-own_window_argb_value 160
-
-minimum_size 180 0  ### width | height
-maximum_width 180
-
-gap_x 20    ### left | right
-gap_y 45    ### up | down
-
-alignment tr
-#######################  End Window Settings  ###
-###  Font Settings  #############################
-# Use Xft (anti-aliased font and stuff)
-use_xft yes
-xftfont Inconsolata:bold:size=9
-#xftfont Liberation Sans:size=9
-
-# Alpha of Xft font. Must be a value at or between 1 and 0 ###
-xftalpha 1
-# Force UTF8? requires XFT ###
-override_utf8_locale yes
-
-uppercase no
-#########################  End Font Settings  ###
-###  Colour Settings  ###########################
-draw_shades no #yes
-default_shade_color 000000
-
-draw_outline no # amplifies text if yes
-default_outline_color 000000
-
-#default_color 656667 # Waldorf original colour
-#default_color 7a7a7a # Flame  & Bunsen Grey
-#default_color 929292 # Labs Grey
-default_color C0C0C0 # Silver
-color0 B0E0E6 # PowderBlue
-color1 778899 # LightSlateGray
-color2 D8BFD8 # Thistle
-color3 9ACD32 # YellowGreen
-color4 FFA07A # LightSalmon
-color5 FFDEAD # NavajoWhite
-color6 00BFFF # DeepSkyBlue
-color7 5F9EA0 # CadetBlue
-color8 BDB76B # DarkKhaki
-color9 CD5C5C # IndianRed
-#######################  End Colour Settings  ###
-###  Borders Section  ###########################
-draw_borders no
-# Stippled borders?
-stippled_borders 5
-# border margins
-border_inner_margin 5
-border_outer_margin 0
-# border width
-border_width 2
-# graph borders
-draw_graph_borders yes #no
-#default_graph_size 15 40
-#######################  End Borders Section  ###
-###  Miscellaneous Section  #####################
-# Boolean value, if true, Conky will be forked to background when started.
-background yes
-
-# Adds spaces around certain objects to stop them from moving other things
-# around, this only helps if you are using a mono font
-# Options: right, left or none
-use_spacer none
-
-# Default and Minimum size is 256 - needs more for single commands that
-# "call" a lot of text IE: bash scripts
-text_buffer_size 6144
-
-# Subtract (file system) buffers from used memory?
-no_buffers yes
-
-# change GiB to G and MiB to M
-short_units yes
-
-# Like it says, ot pads the decimals on % values
-# doesn't seem to work since v1.7.1
-pad_percents 2
-
-# Imlib2 image cache size, in bytes. Default 4MiB Increase this value if you use
-# $image lots. Set to 0 to disable the image cache.
-imlib_cache_size 0
-
-# Use the Xdbe extension? (eliminates flicker)
-# It is highly recommended to use own window with this one
-# so double buffer won't be so big.
-double_buffer yes
-
-#   Maximum size of user text buffer, i.e. layout below TEXT line in config file
-#  (default is 16384 bytes)
-# max_user_text 16384
-
-# Desired output unit of all objects displaying a temperature. Parameters are
-# either "fahrenheit" or "celsius". The default unit is degree Celsius.
-# temperature_unit Fahrenheit
-
-#################  End Miscellaneous Section  ###
-#### ${font Monospace:bold:size=10}${alignc}${execpi 600 $HOME/.config/conky/scripts/bunsenweather.sh}
-update_interval 1
-
-TEXT
-${color}${alignc}S Y S T E M    I N F O
-${hr}
-Date:${alignr}${time %F}
-Time:${alignr}${time %H:%M}
-Uptime:${alignr}${uptime_short}
-
-CPU: ${if_match ${cpu cpu0}<10}  ${cpu cpu0}\
-${else}${if_match ${cpu cpu0}<100} ${cpu cpu0}\
-${else}${cpu cpu0}${endif}${endif}% Used${alignr}${freq_g} GHz
-${cpugraph cpu0 20,180 ${color} ${color}}
-RAM: ${mem} Used${alignr}${memmax}
-${memgraph 20,180 ${color} ${color}}
-Disk I/O:
-${diskiograph 20,180 ${color} ${color}}
-Down:  ${downspeed}${goto 115}Up:${alignr}${upspeed}
-
-${alignc}S H O R T C U T    K E Y S
-${hr}
-[Super] + d${alignr}HW Diagnostics
-[Super] + f${alignr}File Manager
-[Super] + h${alignr}Task Manager
-[Super] + i${alignr}HW Information
-[Super] + m${alignr}Mount Volumes
-[Super] + r${alignr}Run Dialog
-[Super] + s${alignr}SMART Check
-[Super] + t${alignr}Terminal
-[Super] + v${alignr}View Temps
-[Super] + w${alignr}Web Browser
-[Super] + x${alignr}Logout

.linux_items/archlive/extra/arch/wifi.conf

@@ -1,9 +0,0 @@
-ctrl_interface=/var/run/wpa_supplicant
-eapol_version=1
-ap_scan=1
-fast_reauth=1
-network={
-    ssid="SomeWiFi"
-    psk="Abracadabra"
-    priority=5
-}

.linux_items/archlive/mkinitcpio.conf

@@ -1,2 +0,0 @@
-HOOKS="base udev memdisk archiso_shutdown archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block pcmcia filesystems keyboard"
-COMPRESSION="xz"

.linux_items/archlive/packages.both

@@ -1,153 +0,0 @@
-aic94xx-firmware
-alsa-utils
-antiword
-arch-install-scripts
-bash-pipes
-bc
-bluez
-bluez-utils
-btrfs-progs
-cbatticon
-chntpw
-cmatrix
-colordiff
-compton
-conky
-crda
-curl
-darkhttpd
-ddrescue
-dhclient
-dialog
-dmidecode
-dmraid
-dnsmasq
-dnsutils
-dos2unix
-dosfstools
-dunst
-e2fsprogs
-elinks
-ethtool
-exfat-utils
-f2fs-tools
-feh
-ffmpeg
-firefox
-fsarchiver
-gnome-keyring
-gnu-netcat
-gparted
-gptfdisk
-grub
-gsmartcontrol
-gtk-theme-arc-git
-hardinfo
-hdparm
-hexedit
-hfsprogs
-htop
-i3-gaps
-i3lock-fancy-git
-i3status
-inxi
-ipw2100-fw
-ipw2200-fw
-irssi
-ldns
-lftp
-libewf
-libinput
-linux-atm
-linux-firmware
-lm_sensors
-lsscsi
-mc
-mdadm
-mediainfo
-mesa-demos
-mkvtoolnix-cli
-mprime-bin
-mpv
-mtools
-mupdf
-ncdu
-ndisc6
-network-manager-applet
-networkmanager
-nfs-utils
-nilfs-utils
-nmap
-ntfs-3g
-ntp
-oblogout
-openbox-patched
-openconnect
-openssh
-openvpn
-p7zip
-papirus-icon-theme
-partclone
-parted
-partimage
-pasystray
-pavucontrol
-ppp
-pptpclient
-progsreiserfs
-pulseaudio
-qemu-guest-agent
-reiserfsprogs
-rfkill
-rng-tools
-rofi
-rp-pppoe
-rsync
-rxvt-unicode
-sdparm
-sg3_utils
-smartmontools
-speedtest-cli
-speedtouch
-spice-vdagent
-sudo
-tcpdump
-terminus-font
-testdisk-wip
-thunar
-tint2
-tk
-tmux
-tree
-ttf-font-awesome
-ttf-inconsolata
-udevil
-udisks2
-ufw
-unzip
-usb_modeswitch
-veracrypt
-vim
-virtualbox-guest-modules-arch
-virtualbox-guest-utils
-vpnc
-wd719x-firmware
-wget
-wimlib
-wireless_tools
-wpa_actiond
-wvdial
-xf86-input-libinput
-xf86-video-amdgpu
-xf86-video-fbdev
-xf86-video-intel
-xf86-video-nouveau
-xf86-video-vesa
-xl2tpd
-xorg-server
-xorg-xdpyinfo
-xorg-xev
-xorg-xinit
-xorg-xinput
-zd1211-firmware
-zsh

.linux_items/archlive/pacman.conf

@@ -1,96 +0,0 @@
-#
-# /etc/pacman.conf
-#
-# See the pacman.conf(5) manpage for option and repository directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-# The following paths are commented out with their default values listed.
-# If you wish to use different paths, uncomment and update the paths.
-#RootDir     = /
-#DBPath      = /var/lib/pacman/
-#CacheDir    = /var/cache/pacman/pkg/
-#LogFile     = /var/log/pacman.log
-#GPGDir      = /etc/pacman.d/gnupg/
-HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-#CleanMethod = KeepInstalled
-#UseDelta    = 0.7
-Architecture = auto
-
-# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
-#IgnorePkg   =
-#IgnoreGroup =
-
-#NoUpgrade   =
-#NoExtract   =
-
-# Misc options
-#UseSyslog
-#Color
-#TotalDownload
-# We cannot check disk space from within a chroot environment
-#CheckSpace
-#VerbosePkgLists
-
-# By default, pacman accepts packages signed by keys that its local keyring
-# trusts (see pacman-key and its man page), as well as unsigned packages.
-SigLevel    = Required DatabaseOptional
-LocalFileSigLevel = Optional
-#RemoteFileSigLevel = Required
-
-# NOTE: You must run `pacman-key --init` before first using pacman; the local
-# keyring can then be populated with the keys of all official Arch Linux
-# packagers with `pacman-key --populate archlinux`.
-
-#
-# REPOSITORIES
-#   - can be defined here or included from another file
-#   - pacman will search repositories in the order defined here
-#   - local/custom mirrors can be added here or in separate files
-#   - repositories listed first will take precedence when packages
-#     have identical names, regardless of version number
-#   - URLs will have $repo replaced by the name of the current repo
-#   - URLs will have $arch replaced by the name of the architecture
-#
-# Repository entries are of the format:
-#       [repo-name]
-#       Server = ServerName
-#       Include = IncludePath
-#
-# The header [repo-name] is crucial - it must be present and
-# uncommented to enable the repo.
-#
-
-# The testing repositories are disabled by default. To enable, uncomment the
-# repo name header and Include lines. You can add preferred servers immediately
-# after the header, and they will be used before the default mirrors.
-
-[wk-repo]
-SigLevel = Optional TrustAll
-Server = file:///home/builduser/wk-arch/wk-repo
-
-#[testing]
-#Include = /etc/pacman.d/mirrorlist
-
-[core]
-Include = /etc/pacman.d/mirrorlist
-
-[extra]
-Include = /etc/pacman.d/mirrorlist
-
-#[community-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-[community]
-Include = /etc/pacman.d/mirrorlist
-
-# An example of a custom package repository.  See the pacman manpage for
-# tips on creating your own repositories.
-#[custom]
-#SigLevel = Optional TrustAll
-#Server = file:///home/custompkgs
-

.linux_items/build-wk

@@ -1,80 +0,0 @@
-#!/bin/bash
-#/srv/ArchBuilds
-# Set Vars
-LOG_DIR="/mnt/Build/logs"
-OUT_DIR="/mnt/Build/isos"
-TMP_DIR="/mnt/Scratch"
-DATE="$(date +%F)"
-DATETIME="$(date +%F_%H%M)"
-
-if [[ "$EUID" -eq 0 ]]; then
-    ## Elevated section ##
-    # Set permissions
-    echo "Setting permissions..."
-    chown root.root archlive -R
-    chmod 700 archlive/airootfs/etc/skel/.ssh
-    chmod 600 archlive/airootfs/etc/skel/.ssh/id_rsa
-
-    # Modify build.sh
-    if ! grep -iq 'customize_iso' archlive/build.sh; then
-        sed -ir 's!run_once make_iso!# customize_iso\ncp -a ${script_path}/extra/* ${work_dir}/iso/\n\nrun_once make_iso!' archlive/build.sh
-    fi
-
-    # Build ISO
-    mkdir $LOG_DIR
-    mkdir $OUT_DIR
-    mkdir $TMP_DIR
-    ./archlive/build.sh -N "wk-arch" -V "$DATE" -L "WK_ARCH" -w "$TMP_DIR" -o "$OUT_DIR" -v | tee -a "$LOG_DIR/$DATETIME.log"
-
-    # Cleanup
-    echo "Removing temp files..."
-    rm "$TMP_DIR" -Rf | tee -a "$LOG_DIR/$DATETIME.log"
-
-    echo "Reverting permissions..."
-    chown builduser.builduser archlive -R
-else
-    ## Non-elevated section ##
-    # Prep
-    mkdir wk-repo
-    pushd wk-repo >/dev/null
-    BEFORE=$(date "+%F_%H%M%S")
-    mkdir _done/$BEFORE -p
-    find . -maxdepth 1 -not -name 'update' -and -not -name '_done' -exec mv -nv "{}" _done/$BEFORE/ \;
-    rmdir _done/* --ignore-fail-on-non-empty
-    sleep 1s
-    AFTER=$(date "+%F_%H%M%S")
-
-    # Install Dependancies
-    sudo pacman -Syu base-devel libewf attr progsreiserfs --needed --noconfirm
-    #for p in lha; do
-    #    echo "Installing dependancy: $p"
-    #    curl -LsfO https://aur.archlinux.org/cgit/aur.git/snapshot/$p.tar.gz
-    #    tar xf $p.tar.gz
-    #    pushd $p >/dev/null
-    #    makepkg -si --needed --noconfirm
-    #    popd >/dev/null
-    #    mv -n $p $p.tar.gz _done/$AFTER/
-    #done
-
-    # Build custom repo packages
-    mkdir _done/$AFTER
-    for p in aic94xx-firmware bash-pipes gtk-theme-arc-git hfsprogs i3-gaps i3lock-fancy-git mprime-bin openbox-patched papirus-icon-theme pasystray testdisk-wip ttf-font-awesome wd719x-firmware wimlib; do
-        echo "Building: $p"
-        curl -LsfO https://aur.archlinux.org/cgit/aur.git/snapshot/$p.tar.gz
-        tar xf $p.tar.gz
-        pushd $p >/dev/null
-        makepkg -s --noconfirm
-        popd >/dev/null
-        mv -n $p/*xz ./
-        mv -n $p $p.tar.gz _done/$AFTER/
-    done
-
-    # Build custom repo database
-    for p in *xz; do
-        repo-add wk-repo.db.tar.gz $p
-    done
-    popd >/dev/null
-
-    # Rerun script as root to start Archiso build process
-    sudo "$0"
-fi

.pre-commit-config.yaml

@@ -0,0 +1,6 @@
+repos:
+- repo: https://github.com/charliermarsh/ruff-pre-commit
+  # Ruff version.
+  rev: 'v0.0.257'
+  hooks:
+    - id: ruff

LICENSE.txt

@@ -1,7 +1,7 @@
-Copyright (c) 2017 Alan Mason
-
-Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+Copyright (c) 2023 Alan Mason
+
+Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

README.md

@@ -0,0 +1,39 @@
+# WizardKit #
+
+A collection of tools to help technicians service computers.
+
+## Overview ##
+
+There are a few main parts to this project and their uses:
+
+* Live Linux image
+  * Hardware diagnostics
+    * CPU stress tests with temperature monitoring
+    * Health checks/tests for storage drives
+    * Misc other diagnostics
+  * Data recovery
+    * General data transfers from many possible filesystems
+    * Bit-level drive duplication based on ddrescue
+* Live macOS image
+  * Hardware diagnostics
+    * CPU stress tests with temperature monitoring
+    * Health checks/tests for storage drives
+  * Data recovery
+    * _(Currently under development)_
+* Live WinPE image
+  * _(Currently under development)_
+* Windows Kit _(intended for UFDs)_
+  * Automated repairs
+    * AV scans
+    * Windows health checks
+  * Automated setup
+    * Install software
+    * System configuration
+
+## Combined UFD ##
+
+All parts can be combined onto a single UFD!
+
+* Compatible with most legacy and UEFI bootloaders
+* Custom boot menus
+* To get started run `build-ufd` under the live Linux image

images/logo.svg

@@ -0,0 +1,122 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="32"
+   height="32"
+   id="svg2"
+   version="1.1"
+   inkscape:version="0.91 r"
+   sodipodi:docname="logo.svg"
+   inkscape:export-filename="/home/thewizardpp/projects/logos/logo512x512.png"
+   inkscape:export-xdpi="1440"
+   inkscape:export-ydpi="1440">
+  <defs
+     id="defs4">
+    <inkscape:perspective
+       sodipodi:type="inkscape:persp3d"
+       inkscape:vp_x="0 : 526.18109 : 1"
+       inkscape:vp_y="0 : 1000 : 0"
+       inkscape:vp_z="744.09448 : 526.18109 : 1"
+       inkscape:persp3d-origin="372.04724 : 350.78739 : 1"
+       id="perspective10" />
+    <filter
+       id="filter3668"
+       inkscape:label="Drop shadow"
+       width="1.5"
+       height="1.5"
+       x="-.25"
+       y="-.25">
+      <feGaussianBlur
+         id="feGaussianBlur3670"
+         in="SourceAlpha"
+         stdDeviation="1,000000"
+         result="blur" />
+      <feColorMatrix
+         id="feColorMatrix3672"
+         result="bluralpha"
+         type="matrix"
+         values="1 0 0 0 0 0 1 0 0 0 0 0 1 0 0 0 0 0 0,500000 0 " />
+      <feOffset
+         id="feOffset3674"
+         in="bluralpha"
+         dx="1,000000"
+         dy="1,000000"
+         result="offsetBlur" />
+      <feMerge
+         id="feMerge3676">
+        <feMergeNode
+           id="feMergeNode3678"
+           in="offsetBlur" />
+        <feMergeNode
+           id="feMergeNode3680"
+           in="SourceGraphic" />
+      </feMerge>
+    </filter>
+  </defs>
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#ffffff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     inkscape:pageopacity="0.0"
+     inkscape:pageshadow="2"
+     inkscape:zoom="15.839192"
+     inkscape:cx="16.469461"
+     inkscape:cy="15.775995"
+     inkscape:document-units="px"
+     inkscape:current-layer="layer2"
+     showgrid="false"
+     inkscape:window-width="1152"
+     inkscape:window-height="844"
+     inkscape:window-x="-2"
+     inkscape:window-y="93"
+     inkscape:window-maximized="1" />
+  <metadata
+     id="metadata7">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title />
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:groupmode="layer"
+     id="layer2"
+     inkscape:label="Layer"
+     style="display:inline">
+    <g
+       id="g3613"
+       transform="matrix(1.0696952,0,0,1.0696952,-1.9682871,1.2767394)">
+      <path
+         sodipodi:nodetypes="cssssss"
+         d="m 28.466519,15.480445 c -1.690444,-0.411311 -3.880242,0.0024 -6.862802,1.703057 -4.343818,2.477 -5.647804,4.7124 -10.531132,6.5262 -2.7416801,1.0184 -7.1725478,1.2727 -6.7296333,-1.9563 0.4055207,-2.9564 4.8746766,-5.683963 10.7473903,-5.268022 7.253753,0.513753 7.780294,2.643843 11.236758,2.445771 4.073631,-0.233438 3.02577,-3.235043 2.139419,-3.450706 z"
+         style="fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+         id="path2822"
+         inkscape:connector-curvature="0" />
+      <path
+         sodipodi:nodetypes="ccscsc"
+         id="path2832"
+         d="m 22.349625,16.595174 c -5.498466,2.959917 -4.603518,5.10607 -10.999048,3.821601 1.40216,-4.418086 4.962036,-16.95097 7.147841,-17.2692571 1.878431,-0.2735287 4.924495,4.2931483 4.924495,4.2931483 0,0 -3.661803,-2.9673231 -4.16688,-1.7046325 -0.593183,1.4829546 2.39459,8.4145833 3.093592,10.8591403 z"
+         style="display:inline;fill:#ffffff;fill-opacity:1;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:round;stroke-opacity:1"
+         inkscape:connector-curvature="0" />
+      <path
+         sodipodi:nodetypes="ccc"
+         id="path3611"
+         d="m 22.074942,15.74979 c 1.515307,-0.313608 1.831341,-0.3546 3.377477,-0.485523 1.799175,-0.173029 3.187957,0.237433 3.187957,0.237433"
+         style="fill:none;stroke:#000000;stroke-width:1px;stroke-linecap:round;stroke-linejoin:miter;stroke-opacity:1"
+         inkscape:connector-curvature="0" />
+    </g>
+  </g>
+</svg>

scripts/Launch.cmd

@@ -0,0 +1,508 @@
+:: WizardKit: Wrapper for launching programs and scripts.
+::
+:: Some features:
+::   * If the OS is 64-bit then the WorkingDir is scanned for a 64-bit version of the programs
+::   * Allows for centralized terminal emulation settings management
+::   * Allows for smaller "launcher" scripts to be used as they will rely on this script.
+
+@echo off
+if defined DEBUG (@echo on)
+
+:Init
+setlocal EnableDelayedExpansion
+title WizardKit: Launcher
+pushd "%~dp0"
+call :FindBin
+call :DeQuote L_ITEM
+call :DeQuote L_PATH
+call :DeQuote L_TYPE
+
+:SetVariables
+rem Set variables using settings\main.py file
+set "SETTINGS=%bin%\Scripts\wk\cfg\main.py"
+for %%v in (ARCHIVE_PASSWORD KIT_NAME_FULL OFFICE_SERVER_IP QUICKBOOKS_SERVER_IP) do (
+  set "var=%%v"
+  for /f "tokens=* usebackq" %%f in (`findstr "!var!=" "%SETTINGS%"`) do (
+    set "_v=%%f"
+    set "_v=!_v:*'=!"
+    set "%%v=!_v:~0,-1!"
+  )
+)
+rem Set ARCH to 32 as a gross assumption and check for x86_64 status
+set ARCH=32
+if /i "%PROCESSOR_ARCHITECTURE%" == "AMD64" set "ARCH=64"
+set "SEVEN_ZIP=%bin%\7-Zip\7z.exe"
+set "CON=%bin%\ConEmu\ConEmu.exe"
+set "FASTCOPY=%bin%\FastCopy\FastCopy.exe"
+set "POWERSHELL=%systemroot%\system32\WindowsPowerShell\v1.0\powershell.exe"
+set "PYTHON=%bin%\Python\x32\python.exe"
+if %ARCH% equ 64 (
+  set "CON=%bin%\ConEmu\ConEmu64.exe"
+  set "FASTCOPY=%bin%\FastCopy\FastCopy64.exe"
+  set "PYTHON=%bin%\Python\x64\python.exe"
+)
+
+:UpdateTitle
+rem Sets title using KIT_NAME_FULL from settings\main.py (unless %window_title% already set)
+if defined window_title (
+  title %window_title%
+) else (
+  set "window_title=%*"
+  if not defined window_title set "window_title=Launcher"
+  set "window_title=%KIT_NAME_FULL%: %window_title%"
+  title %window_title%
+)
+
+:CheckUsage
+rem Check for empty passed variables
+if not defined L_TYPE (goto Usage)
+if not defined L_PATH (goto Usage)
+if not defined L_ITEM (goto Usage)
+rem Assume if not "True" then False (i.e. undefine variable)
+if /i not "%L_ELEV%" == "True" (set "L_ELEV=")
+if /i not "%L_NCMD%" == "True" (set "L_NCMD=")
+if /i not "%L__CLI%" == "True" (set "L__CLI=")
+
+:RelaunchInConEmu
+set RELOAD_IN_CONEMU=True
+if defined ConEmuBuild        set "RELOAD_IN_CONEMU="
+if defined L_NCMD             set "RELOAD_IN_CONEMU="
+if "%L_TYPE%" == "Executable" set "RELOAD_IN_CONEMU="
+if "%L_TYPE%" == "PSScript"   set "RELOAD_IN_CONEMU="
+if "%L_TYPE%" == "PyScript"   set "RELOAD_IN_CONEMU="
+
+if defined RELOAD_IN_CONEMU (
+  set "con_args=-new_console:n"
+  rem If in DEBUG state then force ConEmu to stay open
+  if defined DEBUG (set "con_args=!con_args! -new_console:c")
+  start "" "%CON%" -run ""%~0" %*" !con_args! || goto ErrorUnknown
+  exit /b 0
+)
+
+:CheckLaunchType
+rem Jump to the selected launch type or show usage
+if /i "%L_TYPE%" == "Executable"  (goto LaunchExecutable)
+if /i "%L_TYPE%" == "Folder"      (goto LaunchFolder)
+if /i "%L_TYPE%" == "Office"      (goto LaunchOffice)
+if /i "%L_TYPE%" == "PSScript"    (goto LaunchPSScript)
+if /i "%L_TYPE%" == "PyScript"    (goto LaunchPyScript)
+if /i "%L_TYPE%" == "QuickBooks"  (goto LaunchQuickBooksSetup)
+goto Usage
+
+:LaunchExecutable
+rem Prep
+call :ExtractOrFindPath || goto ErrorProgramNotFound
+
+rem Check for 64-bit prog (if running on 64-bit system)
+set "prog=%_path%\%L_ITEM%"
+if %ARCH% equ 64 (
+  if exist "%_path%\%L_ITEM:.=64.%" set "prog=%_path%\%L_ITEM:.=64.%"
+) else (
+  if exist "%_path%\%L_ITEM:.=32.%" set "prog=%_path%\%L_ITEM:.=32.%"
+)
+if not exist "%prog%" goto ErrorProgramNotFound
+
+rem Run
+popd && pushd "%_path%"
+if defined L__CLI goto LaunchExecutableCLI
+if defined L_ELEV (
+  goto LaunchExecutableElev
+) else (
+  goto LaunchExecutableUser
+)
+
+:LaunchExecutableCLI
+rem Prep
+set "con_args=-new_console:n"
+if defined DEBUG (set "con_args=%con_args% -new_console:c")
+if defined L_ELEV (set "con_args=%con_args% -new_console:a")
+
+rem Run
+start "" "%CON%" -run "%prog%" %L_ARGS% %con_args% || goto ErrorUnknown
+goto Exit
+
+:LaunchExecutableElev
+rem Prep
+call :DeQuote prog
+call :DeQuote L_ARGS
+
+rem Create VB script
+mkdir "%bin%\tmp" 2>nul
+echo Set UAC = CreateObject^("Shell.Application"^) > "%bin%\tmp\Elevate.vbs"
+echo UAC.ShellExecute "%prog%", "%L_ARGS%", "", "runas", 1 >> "%bin%\tmp\Elevate.vbs"
+
+rem Run
+"%systemroot%\System32\cscript.exe" //nologo "%bin%\tmp\Elevate.vbs" || goto ErrorUnknown
+goto Exit
+
+:LaunchExecutableUser
+rem Run
+start "" "%prog%" %L_ARGS% || goto ErrorUnknown
+goto Exit
+
+:LaunchFolder
+rem Prep
+call :ExtractOrFindPath || goto ErrorProgramNotFound
+
+rem Run
+start "" "explorer.exe" "%_path%" || goto ErrorUnknown
+goto Exit
+
+:LaunchOffice
+call "%bin%\Scripts\init_client_dir.cmd" /Office
+set "_odt=False"
+if %L_PATH% equ 2016 (set "_odt=True")
+if %L_PATH% equ 2019 (set "_odt=True")
+if "%_odt%" == "True" (
+  goto LaunchOfficeODT
+) else (
+  goto LaunchOfficeSetup
+)
+
+:LaunchOfficeODT
+rem Prep
+set "args=-aoa -bso0 -bse0 -bsp0 -p%ARCHIVE_PASSWORD%"
+set "config=%L_ITEM%"
+set "dest=%client_dir%\Office\ODT"
+set "odt_exe=setup.exe"
+set "source=%cbin%\_Office.7z"
+
+rem Extract
+if not exist "%source%" (goto ErrorODTSourceNotFound)
+"%SEVEN_ZIP%" e "%source%" %args% -o"%dest%" %odt_exe% %config% || exit /b 1
+"%systemroot%\System32\ping.exe" -n 2 127.0.0.1>nul
+
+rem Verify
+if not exist "%dest%\setup.exe" (goto ErrorODTSourceNotFound)
+if not exist "%dest%\%config%" (goto ErrorODTSourceNotFound)
+pushd "%dest%"
+
+rem Run
+rem # The line below jumps to ErrorUnknown even when it runs correctly??
+rem start "" "setup.exe" /configure %L_ITEM% || popd & goto ErrorUnknown
+rem # Going to assume it extracted correctly and blindly start setup.exe
+start "" "setup.exe" /configure %config%
+popd
+goto Exit
+
+:LaunchOfficeSetup
+rem Prep
+set "fastcopy_args=/cmd=diff /no_ui /auto_close"
+set "product=%L_PATH%\%L_ITEM%"
+set "product_name=%L_ITEM%"
+call :GetBasename product_name || goto ErrorBasename
+set "source=\\%OFFICE_SERVER_IP%\Office\%product%"
+set "dest=%client_dir%\Office"
+
+rem Verify
+if not exist "%source%" (goto ErrorOfficeSourceNotFound)
+
+rem Copy
+echo Copying setup file(s) for %product_name%...
+start "" /wait "%FASTCOPY%" %fastcopy_args% "%source%" /to="%dest%\"
+
+rem Run
+if exist "%dest%\%product_name%\setup.exe" (
+  start "" "%dest%\%product_name%\setup.exe" || goto ErrorUnknown
+) else if "%product_name:~-3,3%" == "exe" (
+  start "" "%dest%\%product_name%" || goto ErrorUnknown
+) else if "%product_name:~-3,3%" == "msi" (
+  start "" "%dest%\%product_name%" || goto ErrorUnknown
+) else (
+  rem Office source not supported by this script
+  goto ErrorOfficeUnsupported
+)
+goto Exit
+
+:LaunchPSScript
+rem Prep
+call :ExtractOrFindPath || goto ErrorProgramNotFound
+set "script=%_path%\%L_ITEM%"
+set "ps_args=-ExecutionPolicy Bypass -NoProfile"
+
+rem Verify
+if not exist "%script%" goto ErrorScriptNotFound
+
+rem Run
+popd && pushd "%_path%"
+if defined L_ELEV (
+  goto LaunchPSScriptElev
+) else (
+  goto LaunchPSScriptUser
+)
+
+:LaunchPSScriptElev
+rem Prep
+call :DeQuote script
+
+rem Create VB script
+mkdir "%bin%\tmp" 2>nul
+echo Set UAC = CreateObject^("Shell.Application"^) > "%bin%\tmp\Elevate.vbs"
+if defined L_NCMD (
+  rem use Powershell's window instead of %CON%
+  echo UAC.ShellExecute "%POWERSHELL%", "%ps_args% -File "%script%"", "", "runas", 3 >> "%bin%\tmp\Elevate.vbs"
+) else (
+  echo UAC.ShellExecute "%CON%", "-run %POWERSHELL% %ps_args% -File "^"%script%^"" -new_console:n", "", "runas", 1 >> "%bin%\tmp\Elevate.vbs"
+)
+
+rem Run
+"%systemroot%\System32\cscript.exe" //nologo "%bin%\tmp\Elevate.vbs" || goto ErrorUnknown
+goto Exit
+
+:LaunchPSScriptUser
+rem Run
+if defined L_NCMD (
+  start "" "%POWERSHELL%" %ps_args% -File "%script%" || goto ErrorUnknown
+) else (
+  start "" "%CON%" -run "%POWERSHELL%" %ps_args% -File "%script%" -new_console:n || goto ErrorUnknown
+)
+goto Exit
+
+:LaunchPyScript
+rem Prep
+call :ExtractOrFindPath || goto ErrorProgramNotFound
+set "script=%_path%\%L_ITEM%"
+
+rem Verify
+"%PYTHON%" --version >nul || goto ErrorPythonUnsupported
+if not exist "%script%" goto ErrorScriptNotFound
+
+rem Run
+if defined L_ELEV (
+  goto LaunchPyScriptElev
+) else (
+  goto LaunchPyScriptUser
+)
+
+:LaunchPyScriptElev
+rem Prep
+call :DeQuote script
+
+rem Create VB script
+mkdir "%bin%\tmp" 2>nul
+echo Set UAC = CreateObject^("Shell.Application"^) > "%bin%\tmp\Elevate.vbs"
+if defined L_NCMD (
+  echo UAC.ShellExecute "%PYTHON%", """%script%"" %L_ARGS%", "", "runas", 3 >> "%bin%\tmp\Elevate.vbs"
+) else (
+  echo UAC.ShellExecute "%CON%", "-run ""%PYTHON%"" ""%script%"" %L_ARGS% -new_console:n", "", "runas", 1 >> "%bin%\tmp\Elevate.vbs"
+)
+
+rem Run
+"%systemroot%\System32\cscript.exe" //nologo "%bin%\tmp\Elevate.vbs" || goto ErrorUnknown
+goto Exit
+
+:LaunchPyScriptUser
+if defined L_NCMD (
+  start "" "%PYTHON%" "%script%" %L_ARGS% || goto ErrorUnknown
+) else (
+  start "" "%CON%" -run "%PYTHON%" "%script%" %L_ARGS% -new_console:n || goto ErrorUnknown
+)
+goto Exit
+
+:LaunchQuickBooksSetup
+rem Prep
+call "%bin%\Scripts\init_client_dir.cmd" /QuickBooks
+set "fastcopy_args=/cmd=diff /no_ui /auto_close"
+set "product=%L_PATH%\%L_ITEM%"
+set "product_name=%L_ITEM%"
+call :GetBasename product_name || goto ErrorBasename
+set "source=\\%QUICKBOOKS_SERVER_IP%\QuickBooks\%product%"
+set "dest=%client_dir%\QuickBooks"
+
+rem Verify
+if not exist "%source%" (goto ErrorQuickBooksSourceNotFound)
+
+rem Copy
+echo Copying setup file(s) for %L_ITEM%...
+start "" /wait "%FASTCOPY%" %fastcopy_args% "%source%" /to="%dest%\"
+
+rem Run
+if exist "%dest%\%product_name%\Setup.exe" (
+  pushd "%dest%\%product_name%"
+  start "" "%dest%\%product_name%\Setup.exe" || goto ErrorUnknown
+  popd
+) else (
+  rem QuickBooks source not supported by this script
+  goto ErrorQuickBooksUnsupported
+)
+goto Exit
+
+:Usage
+echo.
+echo.Usage (via defined variables):
+echo.   L_TYPE      L_PATH       L_ITEM   L_ARGS
+echo.   Executable  Working Dir  Program  Args   [L_7ZIP] [L_ELEV] [L__CLI]
+echo.   Folder    Folder     '.'                 [L_7ZIP]
+echo.   Office    Year       Product             [L_7ZIP]
+echo.   PSScript  Scripts    Script              [L_7ZIP] [L_ELEV] [L_NCMD]
+echo.   PyScript  Scripts    Script       Args   [L_7ZIP] [L_ELEV] [L_NCMD]
+echo.   QuickBooks  Year     Product             [L_7ZIP]
+echo.
+echo.L_7ZIP:  Extra arguments for 7-Zip (in the :ExtractCBin label)
+echo.L_ELEV:  Elevate to run as Admin
+echo.L_NCMD:  Do not run script inside ConEmu (i.e. use the native window)
+echo.L__CLI:  Run executable in ConEmu
+echo.
+goto Abort
+
+:: Functions ::
+:DeQuote
+rem Code taken from http://ss64.com/nt/syntax-dequote.html
+if not defined %1 (@exit /b 1)
+for /f "delims=" %%a in ('echo %%%1%%') do set %1=%%~a
+@exit /b 0
+
+:ExtractCBin
+rem Extract %cbin% archive into %bin%
+echo Extracting "%L_PATH%"...
+set "source=%cbin%\%L_PATH%.7z"
+set "dest=%bin%\%L_PATH%"
+set "args=-aos -bso0 -bse0 -bsp0 -p%ARCHIVE_PASSWORD%"
+if defined DEBUG (set "args=-aos -p%ARCHIVE_PASSWORD%")
+"%SEVEN_ZIP%" x "%source%" %args% -o"%dest%" %L_7ZIP% || exit /b 1
+ping.exe -n 2 127.0.0.1>nul
+exit /b 0
+
+:FindBin
+rem Checks the current directory and all parents for the ".bin" folder
+rem NOTE: Has not been tested for UNC paths
+set bin=
+pushd "%~dp0"
+:FindBinInner
+if exist ".bin" (goto FindBinDone)
+if "%~d0\" == "%cd%" (popd & @exit /b 1)
+cd ..
+goto FindBinInner
+:FindBinDone
+set "bin=%cd%\.bin"
+set "cbin=%cd%\.cbin"
+popd
+@exit /b 0
+
+:GetBasename
+rem Loop over passed variable to remove all text left of the last '\' character
+rem NOTE: This function should be called as 'call :GetBasename VarName || goto ErrorBasename' to catch variables that become empty.
+for /f "delims=" %%a in ('echo %%%1%%') do (set "_tmp=%%~a")
+:GetBasenameInner
+set "_tmp=%_tmp:*\=%"
+if not defined _tmp (@exit /b 1)
+if not "%_tmp%" == "%_tmp:*\=%" (goto GetBasenameInner)
+:GetBasenameDone
+set "%1=%_tmp%"
+@exit /b 0
+
+:ExtractOrFindPath
+rem Test L_PATH in the following order:
+rem    1: %cbin%\L_PATH.7z (which will be extracted to %bin%\L_PATH)
+rem    2: %bin%\L_PATH
+rem    3. %L_PATH%     (i.e. treat L_PATH as an absolute path)
+rem NOTE: This function should be called as 'call :ExtractOrFindPath || goto ErrorProgramNotFound' to catch invalid paths.
+set _path=
+if exist "%cbin%\%L_PATH%.7z" (
+  call :ExtractCBin
+) else if exist "%cbin%\%L_PATH%\%L_ITEM:~0,-4%.7z" (
+  call :ExtractCBin
+)
+if exist "%bin%\%L_PATH%" (set "_path=%bin%\%L_PATH%")
+if not defined _path (set "_path=%L_PATH%")
+rem Raise error if path is still not available
+if not exist "%_path%" (exit /b 1)
+exit /b 0
+
+:: Errors ::
+:ErrorBasename
+echo.
+echo ERROR: GetBasename resulted in an empty variable.
+goto Abort
+
+:ErrorNoBin
+echo.
+echo ERROR: ".bin" folder not found.
+goto Abort
+
+:ErrorODTSourceNotFound
+echo.
+echo ERROR: Office Deployment Tool source not found.
+goto Abort
+
+:ErrorOfficeSourceNotFound
+echo.
+echo ERROR: Office source "%L_ITEM%" not found.
+goto Abort
+
+:ErrorOfficeUnsupported
+rem Source is not an executable nor is a folder with a setup.exe file inside. Open explorer to local setup file(s) instead.
+echo.
+echo ERROR: Office version not supported by this script.
+start "" "explorer.exe" "%client_dir%\Office"
+goto Abort
+
+:ErrorPythonUnsupported
+rem The Windows installation lacks Windows update KB2999226 needed to run Python
+echo.
+echo ERROR: Failed to run Python, try installing Windows update KB2999226.
+echo NOTE: That update is from October 2015 so this system is SEVERELY outdated
+if exist "%bin%\..\Installers\Extras\Windows Updates" (
+  start "" "explorer.exe" "%bin%\..\Installers\Extras\Windows Updates"
+)
+goto Abort
+
+:ErrorQuickBooksSourceNotFound
+echo.
+echo ERROR: QuickBooks source "%L_ITEM%" not found.
+goto Abort
+
+:ErrorQuickBooksUnsupported
+rem Source is not an executable nor is a folder with a setup.exe file inside. Open explorer to local setup file(s) instead.
+echo.
+echo ERROR: QuickBooks version not supported by this script.
+start "" "explorer.exe" "%client_dir%\QuickBooks"
+goto Abort
+
+:ErrorProgramNotFound
+echo.
+echo ERROR: Program "%prog%" not found.
+goto Abort
+
+:ErrorScriptNotFound
+echo.
+echo ERROR: Script "%script%" not found.
+goto Abort
+
+:ErrorUnknown
+echo.
+echo ERROR: Unknown error encountered.
+goto Abort
+
+:Abort
+rem Handle color theme for both the native console and ConEmu
+if defined ConEmuBuild (
+  color c4
+) else (
+  color 4e
+)
+echo Aborted.
+echo.
+echo DETAILS: L_TYPE: %L_TYPE%
+echo.         L_PATH: %L_PATH%
+echo.         L_ITEM: %L_ITEM%
+echo.         L_ARGS: %L_ARGS%
+echo.         L_7ZIP: %L_7ZIP%
+echo.         L_ELEV: %L_ELEV%
+echo.         L_NCMD: %L_NCMD%
+echo.         L__CLI: %L__CLI%
+echo.         CON:    %CON%
+echo.         DEBUG:  %DEBUG%
+echo.         PYTHON: %PYTHON%
+echo Press any key to exit...
+pause>nul
+rem reset color and reset errorlevel to 0
+rem NOTE: This is done to avoid causing a ErrorLaunchCMD in the launcher.cmd
+color 07
+goto Exit
+
+:: Cleanup and exit ::
+:Exit
+popd
+endlocal
+exit /b %errorlevel%

scripts/Launcher_Template.cmd

@@ -0,0 +1,113 @@
+:: WizardKit: Launcher Script ::
+::
+:: This script works by setting env variables and then calling Launch.cmd
+:: which inherits the variables. This bypasses batch file argument parsing
+:: which is awful.
+@echo off
+
+:Init
+setlocal EnableDelayedExpansion
+title WizardKit: Launcher
+call :CheckFlags %*
+call :FindBin
+call :SetTitle Launcher
+
+:Optional
+:: This section is for any work that needs done before launching L_ITEM
+rem EXTRA_CODE
+
+:DefineLaunch
+:: See %bin%\Scripts\Launch.cmd for details under :Usage label
+set L_TYPE=
+set L_PATH=
+set L_ITEM=
+set L_ARGS=
+set L__CLI=
+set L_7ZIP=
+set L_ELEV=
+set L_NCMD=
+
+:::::::::::::::::::::::::::::::::::::::::::
+:: Do not edit anything below this line! ::
+:::::::::::::::::::::::::::::::::::::::::::
+
+:LaunchPrep
+rem Verifies the environment before launching item
+if not defined bin (goto ErrorNoBin)
+if not exist "%bin%\Scripts\Launch.cmd" (goto ErrorLaunchCMDMissing)
+
+:Launch
+rem Calls the Launch.cmd script using the variables defined above
+call "%bin%\Scripts\Launch.cmd" || goto ErrorLaunchCMD
+goto Exit
+
+:: Functions ::
+:CheckFlags
+rem Loops through all arguments to check for accepted flags
+set DEBUG=
+for %%f in (%*) do (
+  if /i "%%f" == "/DEBUG" (@echo on & set "DEBUG=/DEBUG")
+)
+@exit /b 0
+
+:FindBin
+rem Checks the current directory and all parents for the ".bin" folder
+rem NOTE: Has not been tested for UNC paths
+set bin=
+pushd "%~dp0"
+:FindBinInner
+if exist ".bin" (goto FindBinDone)
+if "%~d0\" == "%cd%" (popd & @exit /b 1)
+cd ..
+goto FindBinInner
+:FindBinDone
+set "bin=%cd%\.bin"
+set "cbin=%cd%\.cbin"
+popd
+@exit /b 0
+
+:SetTitle
+rem Sets title using KIT_NAME_FULL from wk\cfg\main.py
+set "SETTINGS=%bin%\Scripts\wk\cfg\main.py"
+for /f "tokens=* usebackq" %%f in (`findstr KIT_NAME_FULL "%SETTINGS%"`) do (
+  set "_v=%%f"
+  set "_v=!_v:*'=!"
+  set "KIT_NAME_FULL=!_v:~0,-1!"
+)
+set "window_title=%*"
+if not defined window_title set "window_title=Launcher"
+set "window_title=%KIT_NAME_FULL%: %window_title%"
+title %window_title%
+@exit /b 0
+
+:: Errors ::
+:ErrorLaunchCMD
+echo.
+echo ERROR: Launch.cmd did not run correctly. Try using the /DEBUG flag?
+goto Abort
+
+:ErrorLaunchCMDMissing
+echo.
+echo ERROR: Launch.cmd script not found.
+goto Abort
+
+:ErrorNoBin
+echo.
+echo ERROR: ".bin" folder not found.
+goto Abort
+
+:Abort
+color 4e
+echo Aborted.
+echo.
+echo Press any key to exit...
+pause>nul
+color
+rem Set errorlevel to 1 by calling color incorrectly
+color 00
+goto Exit
+
+:: Cleanup and exit ::
+:Exit
+endlocal
+exit /b %errorlevel%

scripts/README.md

@@ -0,0 +1,2 @@
+# WizardKit: Scripts #
+

scripts/apple-fans

@@ -1,13 +1,13 @@
 #!/bin/bash
 #
-## HW diagnostics - Prime95
+## WizardKit: Apple fan speed tool
 
 SMCPATH="/sys/devices/platform/applesmc.768"
 SET_MAX="True"
 
 function usage {
-    echo "Usage: $0 auto|max"
-    echo "  e.g. $0 max"
+    echo "Usage: $(basename "$0") auto|max"
+    echo "  e.g. $(basename "$0") max"
 }
 
 # Set mode

scripts/auto_repairs.py

@@ -0,0 +1,100 @@
+"""WizardKit: Auto Repair Tool"""
+# vim: sts=2 sw=2 ts=2
+
+from typing import Any
+
+import wk
+
+
+# Classes
+REBOOT_STR = wk.ui.ansi.color_string('Reboot', 'YELLOW')
+class MenuEntry():
+  """Simple class to allow cleaner code below."""
+  def __init__(
+      self,
+      name: str,
+      function: str | None = None,
+      selected: bool = True,
+      **kwargs):
+    self.name: str = name
+    self.details: dict[str, Any] = {
+      'Function': function,
+      'Selected': selected,
+      **kwargs,
+      }
+
+
+# STATIC VARIABLES
+BASE_MENUS = {
+  'Groups': {
+    'Backup Settings': (
+      MenuEntry('Enable RegBack',           'auto_enable_regback'),
+      MenuEntry('Enable System Restore',    'auto_system_restore_enable'),
+      MenuEntry('Set System Restore Size',  'auto_system_restore_set_size'),
+      MenuEntry('Create System Restore',    'auto_system_restore_create'),
+      MenuEntry('Backup Browsers',          'auto_backup_browser_profiles'),
+      MenuEntry('Backup Power Plans',       'auto_backup_power_plans'),
+      MenuEntry('Reset Power Plans',        'auto_reset_power_plans'),
+      MenuEntry('Set Custom Power Plan',    'auto_set_custom_power_plan'),
+      MenuEntry('Backup Registry',          'auto_backup_registry'),
+      ),
+    'Windows Repairs': (
+      MenuEntry('Disable Windows Updates',  'auto_windows_updates_disable'),
+      MenuEntry('Reset Windows Updates',    'auto_windows_updates_reset'),
+      MenuEntry(REBOOT_STR,                 'auto_reboot'),
+      MenuEntry('CHKDSK',                   'auto_chkdsk'),
+      MenuEntry('DISM RestoreHealth',       'auto_dism'),
+      MenuEntry('SFC Scan',                 'auto_sfc'),
+      MenuEntry('Clear Proxy Settings',     'auto_reset_proxy'),
+      MenuEntry('Disable Pending Renames',  'auto_disable_pending_renames'),
+      MenuEntry('Registry Repairs',         'auto_repair_registry'),
+      MenuEntry('Reset UAC',                'auto_restore_uac_defaults'),
+      MenuEntry('Reset Windows Policies',   'auto_reset_windows_policies'),
+      ),
+    'Malware Cleanup': (
+      MenuEntry('BleachBit',                'auto_bleachbit'),
+      MenuEntry('HitmanPro',                'auto_hitmanpro'),
+      MenuEntry('KVRT',                     'auto_kvrt'),
+      MenuEntry('Windows Defender',         'auto_microsoft_defender'),
+      MenuEntry('Remove Custom Power Plan', 'auto_remove_power_plan'),
+      MenuEntry(REBOOT_STR,                 'auto_reboot'),
+      ),
+    'Manual Steps': (
+      MenuEntry('AdwCleaner',               'auto_adwcleaner'),
+      MenuEntry('Bulk Crap Uninstaller',    'auto_bcuninstaller'),
+      MenuEntry('Enable Windows Updates',   'auto_windows_updates_enable'),
+      ),
+    },
+  'Options': (
+    MenuEntry('Kill Explorer', selected=False),
+    MenuEntry('Run AVRemover (once)'),
+    MenuEntry('Run RKill'),
+    MenuEntry('Sync Clock'),
+    MenuEntry('Use Autologon', selected=False),
+    ),
+  'Actions': (
+    MenuEntry('Load Preset'),
+    MenuEntry('Options'),
+    MenuEntry('Start', Separator=True),
+    MenuEntry('Quit'),
+    ),
+  }
+PRESETS = {
+  'Default': { # Will be expanded at runtime using BASE_MENUS
+    'Options': (
+      'Run RKill',
+      'Sync Clock',
+      ),
+    },
+  'Custom': {}, # Will remain empty at runtime
+  }
+
+if __name__ == '__main__':
+  try:
+    wk.repairs.win.run_auto_repairs(BASE_MENUS, PRESETS)
+  except KeyboardInterrupt:
+    wk.ui.cli.abort()
+  except SystemExit:
+    raise
+  except: # noqa: E722
+    wk.ui.cli.major_exception()