SMART and Badblocks script unable to detect USB drives. #8

New issue

Closed

opened 2018-01-10 16:06:50 -07:00 by 2Shirt · 2 comments

2Shirt commented

2018-01-10 16:06:50 -07:00

(Migrated from gitea.2shirt.work)

Steps to replicate:

use mount-all-drives to verify that USB drive(s) are indeed attached.
hit super+s to open SMART or super+d (option 3)
No USB drives will be detected, but HDDs will be detected as usual.

Tested with:
Two separate thumb drives
One shop system

When available, will test with a separate system.

Steps to replicate: 1. use ```mount-all-drives``` to verify that USB drive(s) are indeed attached. 2. hit super+s to open SMART or super+d (option 3) 3. No USB drives will be detected, but HDDs will be detected as usual. Tested with: Two separate thumb drives One shop system When available, will test with a separate system.

2Shirt commented

2018-01-10 18:55:03 -07:00

(Migrated from gitea.2shirt.work)

I will enable testing for all devices except those labeled "${KIT_NAME_SHORT}_LINUX"
I would prefer to enable testing for non-hotplug devices and external HDDs excluding all UFDs, card readers, etc.

I will enable testing for all devices except those labeled "${KIT_NAME_SHORT}_LINUX" I would prefer to enable testing for non-hotplug devices and external HDDs excluding all UFDs, card readers, etc.

2Shirt commented

2018-01-15 13:49:23 -07:00

(Migrated from gitea.2shirt.work)

Closing issue; however, I may address this again in the future.