v1.8.1 - Mushishi Build

Main Kit
* Added Win10 v1903 support
* d7II
  * Added Python check before disabling Windows Updates
    * Provides a good break point if KB2999226 needs installed
  * Removed Install SW Bundle, User Checklist, and System Checklist
    * These are all replaced by the new System Setup script below
    * Should avoid the stalls/locks seen when configuring browsers
    * Separates repair actions from setup actions
* System Setup script
  * Replaces New System Setup, Post-d7II, System Checklists, and User Checklists
  * Actions performed are based on the mode selected and answers given
  * ESET now installed from a local source
    * Can optionally install using the MSP settings (ITS/VIP)
    * Includes updated settings for current version
  * Improved LibreOffice installations
    * Installed from a local source
    * Registers all MS Office types†
    * Sets default save-as options unless a config file is already present†
    * † Depending on setup mode selected
  * Improved performance when exporting system info
    * NOTE: Event logs are no longer saved
  * New 4K alignment check
  * New Win10 1903 theme handling
    * If updating Explorer (user) settings the Light theme is disabled
      * Set to the <= 1809 default to match Classic Start theme
* Fixed Gogs issues #44, #48, #71, #73, #77-#79, #82-#87, #89, & #93-#95
* Various other bug fixes

Linux
* Auto-connects to known WiFi networks
* Better osTicket integration
  * The ticket ID and subject are shown when selecting the ticket
  * An error is shown if the ticket ID can't be found
* ddrescue-tui (AKA WKClone and WKImage)
  * Added osTicket integration
    * Prompts for ticket ID before recovery attempts
    * Prompts to post results when exiting
    * Prompts for the ticket ID again if it was skipped before
  * Improved recovery state detection
    * NOTE: percentages may be off by 0.01% due to the rounding method used
* HW-Diagnostics
  * Added option to upload results for review
  * Added RAM info to CPU posts to osTicket
  * Added warning if one or more partitions are not 4K aligned
  * Improved AMD CPU support (k8, k10, etc)
    * These are now treated as CPU temps
    * These are now included in osTicket posts
  * Improved SMART detection and reporting
  * Quick SMART results are now posted to osTicket
    * Only if selected in the menu, not for --quick
* Linux should leave the RTC set to localtime
  * NOTE: Experimental as Linux normally expects it to be set to UTC
* New build-ufd script
  * Now written in Python
  * Only Linux (Full) is required, all other sources optional
  * Boot options are enabled based on files present on the UFD
  * Can update in place without reformatting
* Test-Station detection
  * Updates the hostname and wallpaper to match the test-station
  * NOTE: This functionality is not guaranteed to work 100% of the time
* Fixed Gogs issues #42, #43, #62-#64, #68, #72-#74, #76, #80, #81, #88, #92, & #96
* Fixed GitHub issues #101-#108, & #113
* Various other bug fixes

.bin/ConEmu/ConEmu.xml

@@ -139,7 +139,7 @@
 			<value name="Monospace" type="hex" data="01"/>
 			<value name="CompressLongStrings" type="hex" data="01"/>
 			<value name="BackGround Image show" type="hex" data="01"/>
-			<value name="BackGround Image" type="string" data="ConEmu.png"/>
+			<value name="BackGround Image" type="string" data="ConEmu.jpg"/>
 			<value name="bgImageDarker" type="hex" data="30"/>
 			<value name="bgImageColors" type="dword" data="ffffffff"/>
 			<value name="bgOperation" type="hex" data="07"/>

.bin/Scripts/activate.py

@@ -55,8 +55,8 @@ if __name__ == '__main__':
     print_success('\nDone.')
     pause("Press Enter to exit...")
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/add-known-networks

@@ -0,0 +1,81 @@
+#!/bin/env python3
+#
+## Convert saved WiFi connections for NetworkManager
+
+import os
+import re
+import sys
+import uuid
+
+KNOWN_NETWORKS = '/root/known_networks'
+TEMPLATE = '''[connection]
+id={ssid}
+uuid={uuid}
+type=wifi
+permissions=user:{user}:;
+
+[wifi]
+mac-address-blacklist=
+mode=infrastructure
+ssid={ssid}
+
+[wifi-security]
+auth-alg=open
+key-mgmt=wpa-psk
+psk={password}
+
+[ipv4]
+dns-search=
+method=auto
+
+[ipv6]
+addr-gen-mode=stable-privacy
+dns-search=
+method=auto
+'''
+
+def get_user_name():
+  """Get user name, returns str."""
+  user = None
+
+  # Get running user
+  if 'SUDO_USER' in os.environ:
+    user = os.environ.get('SUDO_USER')
+  else:
+    user = os.environ.get('USER')
+
+  # Check if user manually specified
+  for a in sys.argv:
+    a = a.strip().lower()
+    if a.startswith('--user='):
+      user = a.replace('--user=', '')
+
+  return user
+
+if __name__ == '__main__':
+  known_networks = {}
+  #try:
+  with open('/root/known_networks', 'r') as f:
+    for line in f.readlines():
+      r = re.search(r"^'(.*)':\s+'(.*)'", line.strip())
+      if r:
+        known_networks[r.group(1)] = r.group(2)
+  for ssid, password in known_networks.items():
+    out_path = '{}/{}.nmconnection'.format(
+      '/etc/NetworkManager/system-connections',
+      ssid,
+      )
+    if not os.path.exists(out_path):
+      with open(out_path, 'w') as f:
+        f.write(TEMPLATE.format(
+          user=get_user_name(),
+          ssid=ssid,
+          password=password,
+          uuid=uuid.uuid4(),
+          ))
+    os.chmod(out_path, 0o600)
+  #except:
+  #  # Meh
+  #  pass
+
+# vim: sts=2 sw=2 ts=2

.bin/Scripts/build-ufd

@@ -1,671 +1,149 @@
-#!/usr/bin/env bash
+#!/bin/env python3
 #
-## Wizard Kit: UFD Build Tool
+# pylint: disable=no-name-in-module,wildcard-import,wrong-import-position
-#
+# vim: sts=2 sw=2 ts=2
-# Based on a template by BASH3 Boilerplate v2.3.0
+"""Wizard Kit: UFD build tool"""
-# http://bash3boilerplate.sh/#authors
+
-#
+import os
-# The MIT License (MIT)
+import sys
-# Copyright (c) 2013 Kevin van Zonneveld and contributors
+
-# You are not obligated to bundle the LICENSE file with your b3bp projects as long
+# Init
-# as you leave these references intact in the header comments of your source files.
+sys.path.append(os.path.dirname(os.path.realpath(__file__)))
-
+from docopt import docopt
-# Exit on error. Append "|| true" if you expect an error.
+from functions.common import *
-set -o errexit
+from functions.ufd import *
-# Exit on error inside any functions or subshells.
+from settings.ufd import *
-set -o errtrace
+init_global_vars(silent=True)
-# Do not allow use of undefined vars. Use ${VAR:-} to use an undefined VAR
+
-set -o nounset
+# Main section
-# Catch the error in case mysqldump fails (but gzip succeeds) in `mysqldump |gzip`
+if __name__ == '__main__':
-set -o pipefail
+  # pylint: disable=invalid-name
-# Turn on traces, useful while debugging but commented out by default
+  # Set log
-# set -o xtrace
+  try:
-
+    global_vars['LogDir'] = '{}/Logs'.format(
-if [[ "${BASH_SOURCE[0]}" != "${0}" ]]; then
+      get_user_home(get_user_name()))
-  __i_am_main_script="0" # false
+    set_log_file('Build UFD ({Date-Time}).log'.format(**global_vars))
-
+  except: # pylint: disable=bare-except
-  if [[ "${__usage+x}" ]]; then
+    major_exception()
-    if [[ "${BASH_SOURCE[1]}" = "${0}" ]]; then
-      __i_am_main_script="1" # true
-    fi
-
-    __b3bp_external_usage="true"
-    __b3bp_tmp_source_idx=1
-  fi
-else
-  __i_am_main_script="1" # true
-  [[ "${__usage+x}" ]] && unset -v __usage
-  [[ "${__helptext+x}" ]] && unset -v __helptext
-fi
-
-# Set magic variables for current file, directory, os, etc.
-__dir="$(cd "$(dirname "${BASH_SOURCE[${__b3bp_tmp_source_idx:-0}]}")" && pwd)"
-__file="${__dir}/$(basename "${BASH_SOURCE[${__b3bp_tmp_source_idx:-0}]}")"
-__base="$(basename "${__file}" .sh)"
-__wd="$(pwd)"
-__usage_example="Usage: sudo $(basename "${0}") --ufd-device [device] --linux-iso [path] --main-kit [path] --winpe-iso [path]"
-__all_args=""
-for a in "${@}"; do
-    if [[ "${a:0:1}" == "-" ]]; then
-        __all_args="${__all_args} ${a}"
-    else
-        __all_args="${__all_args} \"${a}\""
-    fi
-done
-
-
-# Define the environment variables (and their defaults) that this script depends on
-LOG_LEVEL="${LOG_LEVEL:-6}" # 7 = debug -> 0 = emergency
-NO_COLOR="${NO_COLOR:-}"    # true = disable color. otherwise autodetected
-
-
-### Functions
-##############################################################################
-
-function __b3bp_log () {
-  local log_level="${1}"
-  shift
-
-  # shellcheck disable=SC2034
-  local color_debug="\x1b[35m"
-  # shellcheck disable=SC2034
-  local color_info="\x1b[32m"
-  # shellcheck disable=SC2034
-  local color_notice="\x1b[34m"
-  # shellcheck disable=SC2034
-  local color_warning="\x1b[33m"
-  # shellcheck disable=SC2034
-  local color_error="\x1b[31m"
-  # shellcheck disable=SC2034
-  local color_critical="\x1b[1;31m"
-  # shellcheck disable=SC2034
-  local color_alert="\x1b[1;33;41m"
-  # shellcheck disable=SC2034
-  local color_emergency="\x1b[1;4;5;33;41m"
-
-  local colorvar="color_${log_level}"
-
-  local color="${!colorvar:-${color_error}}"
-  local color_reset="\x1b[0m"
-
-  if [[ "${NO_COLOR:-}" = "true" ]] || ( [[ "${TERM:-}" != *"256color"* ]] && [[ "${TERM:-}" != "xterm"* ]] && [[ "${TERM:-}" != "screen"* ]] ) || [[ ! -t 2 ]]; then
-    if [[ "${NO_COLOR:-}" != "false" ]]; then
-      # Don't use colors on pipes or non-recognized terminals
-      color=""; color_reset=""
-    fi
-  fi
-
-  # all remaining arguments are to be printed
-  local log_line=""
-
-  while IFS=$'\n' read -r log_line; do
-    echo -e "$(date -u +"%Y-%m-%d %H:%M:%S UTC") ${color}$(printf "[%9s]" "${log_level}")${color_reset} ${log_line}" 1>&2
-  done <<< "${@:-}"
-}
-
-function emergency () {                                __b3bp_log emergency "${@}"; exit 1; }
-function alert ()     { [[ "${LOG_LEVEL:-0}" -ge 1 ]] && __b3bp_log alert "${@}"; true; }
-function critical ()  { [[ "${LOG_LEVEL:-0}" -ge 2 ]] && __b3bp_log critical "${@}"; true; }
-function error ()     { [[ "${LOG_LEVEL:-0}" -ge 3 ]] && __b3bp_log error "${@}"; true; }
-function warning ()   { [[ "${LOG_LEVEL:-0}" -ge 4 ]] && __b3bp_log warning "${@}"; true; }
-function notice ()    { [[ "${LOG_LEVEL:-0}" -ge 5 ]] && __b3bp_log notice "${@}"; true; }
-function info ()      { [[ "${LOG_LEVEL:-0}" -ge 6 ]] && __b3bp_log info "${@}"; true; }
-function debug ()     { [[ "${LOG_LEVEL:-0}" -ge 7 ]] && __b3bp_log debug "${@}"; true; }
-
-function help () {
-  echo "" 1>&2
-  echo " ${*}" 1>&2
-  echo "" 1>&2
-  echo "  ${__usage:-No usage available}" 1>&2
-  echo "" 1>&2
-
-  if [[ "${__helptext:-}" ]]; then
-    echo " ${__helptext}" 1>&2
-    echo "" 1>&2
-  fi
-
-  exit 1
-}
-
-
-### Parse commandline options
-##############################################################################
-
-# Commandline options. This defines the usage page, and is used to parse cli
-# opts & defaults from. The parsing is unforgiving so be precise in your syntax
-# - A short option must be preset for every long option; but every short option
-#   need not have a long option
-# - `--` is respected as the separator between options and arguments
-# - We do not bash-expand defaults, so setting '~/app' as a default will not resolve to ${HOME}.
-#   you can use bash variables to work around this (so use ${HOME} instead)
-
-# shellcheck disable=SC2015
-[[ "${__usage+x}" ]] || read -r -d '' __usage <<-'EOF' || true # exits non-zero when EOF encountered
-  OPTIONS:
-  -u --ufd-device [arg] Device to which the kit will be applied
-  -l --linux-iso  [arg] Path to the Linux ISO
-
-  -e --extra-dir  [arg] Path to the Extra folder (optional)
-  -m --main-kit   [arg] Path to the Main Kit (optional)
-  -w --winpe-iso  [arg] Path to the WinPE ISO (optional)
-  -h --help             This page
-
-  ADVANCED:
-  -d --debug            Enable debug mode
-  -v --verbose          Enable verbose mode
-  -M --use-mbr          Use real MBR instead of GPT w/ Protective MBR
-  -F --force            Bypass all confirmation messages. USE WITH EXTREME CAUTION!
-EOF
-
-# shellcheck disable=SC2015
-[[ "${__helptext+x}" ]] || read -r -d '' __helptext <<-'EOF' || true # exits non-zero when EOF encountered
- Paths can be relative to the current working directory or absolute
-EOF
-
-# Translate usage string -> getopts arguments, and set $arg_<flag> defaults
-while read -r __b3bp_tmp_line; do
-  if [[ "${__b3bp_tmp_line}" =~ ^- ]]; then
-    # fetch single character version of option string
-    __b3bp_tmp_opt="${__b3bp_tmp_line%% *}"
-    __b3bp_tmp_opt="${__b3bp_tmp_opt:1}"
-
-    # fetch long version if present
-    __b3bp_tmp_long_opt=""
-
-    if [[ "${__b3bp_tmp_line}" = *"--"* ]]; then
-      __b3bp_tmp_long_opt="${__b3bp_tmp_line#*--}"
-      __b3bp_tmp_long_opt="${__b3bp_tmp_long_opt%% *}"
-    fi
-
-    # map opt long name to+from opt short name
-    printf -v "__b3bp_tmp_opt_long2short_${__b3bp_tmp_long_opt//-/_}" '%s' "${__b3bp_tmp_opt}"
-    printf -v "__b3bp_tmp_opt_short2long_${__b3bp_tmp_opt}" '%s' "${__b3bp_tmp_long_opt//-/_}"
-
-    # check if option takes an argument
-    if [[ "${__b3bp_tmp_line}" =~ \[.*\] ]]; then
-      __b3bp_tmp_opt="${__b3bp_tmp_opt}:" # add : if opt has arg
-      __b3bp_tmp_init=""  # it has an arg. init with ""
-      printf -v "__b3bp_tmp_has_arg_${__b3bp_tmp_opt:0:1}" '%s' "1"
-    elif [[ "${__b3bp_tmp_line}" =~ \{.*\} ]]; then
-      __b3bp_tmp_opt="${__b3bp_tmp_opt}:" # add : if opt has arg
-      __b3bp_tmp_init=""  # it has an arg. init with ""
-      # remember that this option requires an argument
-      printf -v "__b3bp_tmp_has_arg_${__b3bp_tmp_opt:0:1}" '%s' "2"
-    else
-      __b3bp_tmp_init="0" # it's a flag. init with 0
-      printf -v "__b3bp_tmp_has_arg_${__b3bp_tmp_opt:0:1}" '%s' "0"
-    fi
-    __b3bp_tmp_opts="${__b3bp_tmp_opts:-}${__b3bp_tmp_opt}"
-  fi
-
-  [[ "${__b3bp_tmp_opt:-}" ]] || continue
-
-  if [[ "${__b3bp_tmp_line}" =~ (^|\.\ *)Default= ]]; then
-    # ignore default value if option does not have an argument
-    __b3bp_tmp_varname="__b3bp_tmp_has_arg_${__b3bp_tmp_opt:0:1}"
-
-    if [[ "${!__b3bp_tmp_varname}" != "0" ]]; then
-      __b3bp_tmp_init="${__b3bp_tmp_line##*Default=}"
-      __b3bp_tmp_re='^"(.*)"$'
-      if [[ "${__b3bp_tmp_init}" =~ ${__b3bp_tmp_re} ]]; then
-        __b3bp_tmp_init="${BASH_REMATCH[1]}"
-      else
-        __b3bp_tmp_re="^'(.*)'$"
-        if [[ "${__b3bp_tmp_init}" =~ ${__b3bp_tmp_re} ]]; then
-          __b3bp_tmp_init="${BASH_REMATCH[1]}"
-        fi
-      fi
-    fi
-  fi
-
-  if [[ "${__b3bp_tmp_line}" =~ (^|\.\ *)Required\. ]]; then
-    # remember that this option requires an argument
-    printf -v "__b3bp_tmp_has_arg_${__b3bp_tmp_opt:0:1}" '%s' "2"
-  fi
-
-  printf -v "arg_${__b3bp_tmp_opt:0:1}" '%s' "${__b3bp_tmp_init}"
-done <<< "${__usage:-}"
-
-# run getopts only if options were specified in __usage
-if [[ "${__b3bp_tmp_opts:-}" ]]; then
-  # Allow long options like --this
-  __b3bp_tmp_opts="${__b3bp_tmp_opts}-:"
-
-  # Reset in case getopts has been used previously in the shell.
-  OPTIND=1
-
-  # start parsing command line
-  set +o nounset # unexpected arguments will cause unbound variables
-                 # to be dereferenced
-  # Overwrite $arg_<flag> defaults with the actual CLI options
-  while getopts "${__b3bp_tmp_opts}" __b3bp_tmp_opt; do
-    [[ "${__b3bp_tmp_opt}" = "?" ]] && help "Invalid use of script: ${*} "
-
-    if [[ "${__b3bp_tmp_opt}" = "-" ]]; then
-      # OPTARG is long-option-name or long-option=value
-      if [[ "${OPTARG}" =~ .*=.* ]]; then
-        # --key=value format
-        __b3bp_tmp_long_opt=${OPTARG/=*/}
-        # Set opt to the short option corresponding to the long option
-        __b3bp_tmp_varname="__b3bp_tmp_opt_long2short_${__b3bp_tmp_long_opt//-/_}"
-        printf -v "__b3bp_tmp_opt" '%s' "${!__b3bp_tmp_varname}"
-        OPTARG=${OPTARG#*=}
-      else
-        # --key value format
-        # Map long name to short version of option
-        __b3bp_tmp_varname="__b3bp_tmp_opt_long2short_${OPTARG//-/_}"
-        printf -v "__b3bp_tmp_opt" '%s' "${!__b3bp_tmp_varname}"
-        # Only assign OPTARG if option takes an argument
-        __b3bp_tmp_varname="__b3bp_tmp_has_arg_${__b3bp_tmp_opt}"
-        printf -v "OPTARG" '%s' "${@:OPTIND:${!__b3bp_tmp_varname}}"
-        # shift over the argument if argument is expected
-        ((OPTIND+=__b3bp_tmp_has_arg_${__b3bp_tmp_opt}))
-      fi
-      # we have set opt/OPTARG to the short value and the argument as OPTARG if it exists
-    fi
-    __b3bp_tmp_varname="arg_${__b3bp_tmp_opt:0:1}"
-    __b3bp_tmp_default="${!__b3bp_tmp_varname}"
-
-    __b3bp_tmp_value="${OPTARG}"
-    if [[ -z "${OPTARG}" ]] && [[ "${__b3bp_tmp_default}" = "0" ]]; then
-      __b3bp_tmp_value="1"
-    fi
-
-    printf -v "${__b3bp_tmp_varname}" '%s' "${__b3bp_tmp_value}"
-    debug "cli arg ${__b3bp_tmp_varname} = (${__b3bp_tmp_default}) -> ${!__b3bp_tmp_varname}"
-  done
-  set -o nounset # no more unbound variable references expected
-
-  shift $((OPTIND-1))
-
-  if [[ "${1:-}" = "--" ]] ; then
-    shift
-  fi
-fi
-
-
-### Automatic validation of required option arguments
-##############################################################################
-
-for __b3bp_tmp_varname in ${!__b3bp_tmp_has_arg_*}; do
-  # validate only options which required an argument
-  [[ "${!__b3bp_tmp_varname}" = "2" ]] || continue
-
-  __b3bp_tmp_opt_short="${__b3bp_tmp_varname##*_}"
-  __b3bp_tmp_varname="arg_${__b3bp_tmp_opt_short}"
-  [[ "${!__b3bp_tmp_varname}" ]] && continue
-
-  __b3bp_tmp_varname="__b3bp_tmp_opt_short2long_${__b3bp_tmp_opt_short}"
-  printf -v "__b3bp_tmp_opt_long" '%s' "${!__b3bp_tmp_varname}"
-  [[ "${__b3bp_tmp_opt_long:-}" ]] && __b3bp_tmp_opt_long=" (--${__b3bp_tmp_opt_long//_/-})"
-
-  help "Option -${__b3bp_tmp_opt_short}${__b3bp_tmp_opt_long:-} requires an argument"
-done
-
-
-### Cleanup Environment variables
-##############################################################################
-
-for __tmp_varname in ${!__b3bp_tmp_*}; do
-  unset -v "${__tmp_varname}"
-done
-
-unset -v __tmp_varname
-
-
-### Externally supplied __usage. Nothing else to do here
-##############################################################################
-
-if [[ "${__b3bp_external_usage:-}" = "true" ]]; then
-  unset -v __b3bp_external_usage
-  return
-fi
-
-
-### Signal trapping and backtracing
-##############################################################################
-
-function __b3bp_cleanup_before_exit () {
-  if [[ "$EUID" -eq 0 ]]; then
-    for d in Dest Linux WinPE; do
-      if [[ -d "/mnt/${d}" ]]; then
-        umount "/mnt/${d}" || true
-        rmdir "/mnt/${d}" || true
-      fi
-    done
-  fi
-  if [[ "${?}" != "0" ]]; then
-    info "Sources unmounted"
-  fi
-  if [[ ${arg_F:-} == 0 && "${SILENT:-False}" == "False" ]]; then
-    read -r -p "Press Enter to exit... " ignored_var 2>&1
-  fi
-}
-trap __b3bp_cleanup_before_exit EXIT
-
-# requires `set -o errtrace`
-__b3bp_err_report() {
-    local error_code
-    error_code=${?}
-    error "Error in ${__file} in function ${1} on line ${2}"
-    exit ${error_code}
-}
-# Uncomment the following line for always providing an error backtrace
-trap '__b3bp_err_report "${FUNCNAME:-.}" ${LINENO}' ERR
-
-
-### Command-line argument switches (like -d for debugmode, -h for showing helppage)
-##############################################################################
-
-# debug mode
-if [[ "${arg_d:?}" = "1" ]]; then
-  set -o xtrace
-  LOG_LEVEL="7"
-  # Enable error backtracing
-  trap '__b3bp_err_report "${FUNCNAME:-.}" ${LINENO}' ERR
-fi
-
-# verbose mode
-if [[ "${arg_v:?}" = "1" ]]; then
-  set -o verbose
-fi
-
-
-### Validation. Error out if the things required for your script are not present
-##############################################################################
-
-if [[ "${arg_F:?}" == 1 ]]; then
-    SILENT="True"
-else
-    SILENT="False"
-fi
-if [[ "${arg_M:?}" == 1 ]]; then
-    USE_MBR="True"
-else
-    USE_MBR="False"
-fi
-
-if [[ "${arg_h:?}" == 1 ]]; then
-    help "${__usage_example}"
-else
-    # Print warning line
-    [[ "${arg_u:-}" ]] || echo " -u or --ufd-device is required"
-    [[ "${arg_l:-}" ]] || echo " -l or --linux-iso is required"
-
-    # Bail if necessary
-    [[ "${arg_u:-}" ]] || help "${__usage_example}"
-    [[ "${arg_l:-}" ]] || help "${__usage_example}"
-fi
-[[ "${LOG_LEVEL:-}" ]] || emergency "Cannot continue without LOG_LEVEL. "
-
-
-### More functions
-##############################################################################
-
-function abort () {
-    local abort_message="Aborted"
-    [[ "${1:-}" ]] && abort_message="${1}" || true
-    error "${abort_message}"
-    #echo -e "${YELLOW}${abort_message}${CLEAR}"
-    exit 1
-}
-
-function ask() {
-    if [[ "${SILENT}" == "True" ]]; then
-        echo -e "${1:-} Yes ${BLUE}(Silent)${CLEAR}"
-        return 0
-    fi
-    while :; do
-        read -p "${1:-} [Y/N] " -r answer
-        if echo "$answer" | egrep -iq '^(y|yes|sure)$'; then
-            return 0
-        elif echo "$answer" | egrep -iq '^(n|no|nope)$'; then
-            return 1
-        fi
-    done
-}
-
-
-### Runtime
-##############################################################################
-
-# VARIABLES
-DEST_DEV="${arg_u}"
-DEST_PAR="${DEST_DEV}1"
-LOG_FILE="$(getent passwd "$SUDO_USER" | cut -d: -f6)/Logs/build-ufd_${DEST_DEV##*/}_$(date +%Y-%m-%d_%H%M_%z).log"
-MAIN_PY="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)/settings/main.py"
-RSYNC_ARGS="-hrtuvS --modify-window=1 --progress"
-MAIN_KIT="$(realpath "${arg_m:-}" 2>/dev/null || true)"
-LINUX_ISO="$(realpath "${arg_l:-}" 2>/dev/null || true)"
-WINPE_ISO="$(realpath "${arg_w:-}" 2>/dev/null || true)"
-EXTRA_DIR="$(realpath "${arg_e:-}" 2>/dev/null || true)"
-mkdir -p "$(dirname "$LOG_FILE")"
-chown "$SUDO_USER:$SUDO_USER" -R "$(dirname "$LOG_FILE")"
-
-# COLORS
-CLEAR="\e[0m"
-RED="\e[31m"
-GREEN="\e[32m"
-YELLOW="\e[33m"
-BLUE="\e[34m"
-
-# Load main.py settings
-if [ ! -f "${MAIN_PY}" ]; then
-    echo -e "${RED}ERROR${CLEAR}: ${MAIN_PY} not found."
-    abort
-fi
-while read line; do
-    if echo "${line}" | egrep -q "^\w+='"; then
-        line="$(echo "${line}" | sed -r 's/[\r\n]+//')"
-        eval "${line}"
-    fi
-done < "${MAIN_PY}"
-if [ -z ${KIT_NAME_FULL+x} ]; then
-    # KIT_NAME_FULL is not set, assume main.py missing or malformatted
-    echo -e "${RED}ERROR${CLEAR}: failed to load settings from ${MAIN_PY}"
-    abort
-fi
-ISO_LABEL="${KIT_NAME_SHORT}_LINUX"
-UFD_LABEL="${KIT_NAME_SHORT}_UFD"
-
-# Check if root
-if [[ "$EUID" -ne 0 ]]; then
-    echo -e "${RED}ERROR${CLEAR}: This script must be run as root."
-    abort
-fi
-
-# Check if in tmux
-if ! tmux list-session 2>/dev/null | grep -q "build-ufd"; then
-    # Reload in tmux
-    eval tmux new-session -s "build-ufd" "${0:-}" ${__all_args}
-    SILENT="True" # avoid two "Press Enter to exit..." prompts
-    exit 0
-fi
 
   # Header
-echo -e "${GREEN}${KIT_NAME_FULL}${CLEAR}: UFD Build Tool"
+  print_success(KIT_NAME_FULL)
-echo ""
+  print_standard('UFD Build Tool')
+  print_standard(' ')
 
-# Verify sources
+  # Check if running as root
-[[ -b "${DEST_DEV}" ]] || abort "${DEST_DEV} is not a valid device."
+  if not running_as_root():
-[[ -e "${LINUX_ISO}" ]] || abort "Linux ISO not found."
+    print_error('ERROR: This script is meant to be run as root.')
-if [[ ! -z "${arg_m:-}" ]]; then
+    abort(False)
-  [[ -d "${MAIN_KIT}/.bin" ]] || abort "Invalid Main Kit, ${MAIN_KIT}/.bin not found."
-fi
-if [[ ! -z "${arg_w:-}" ]]; then
-  [[ -e "${WINPE_ISO}" ]] || abort "WinPE ISO not found."
-fi
-if [[ ! -z "${arg_e:-}" ]]; then
-    [[ -d "${EXTRA_DIR}" ]] || abort "Extra Dir not found."
-fi
 
-# Print Info
+  # Docopt
-echo -e "${BLUE}Sources${CLEAR}" | tee -a "${LOG_FILE}"
+  try:
-echo "Main Kit:  ${MAIN_KIT}" | tee -a "${LOG_FILE}"
+    args = docopt(DOCSTRING)
-echo "Linux ISO: ${LINUX_ISO}" | tee -a "${LOG_FILE}"
+  except SystemExit as sys_exit:
-echo "WinPE ISO: ${WINPE_ISO}" | tee -a "${LOG_FILE}"
+    # Catch docopt exits
-echo "Extra Dir: ${EXTRA_DIR:-(Not Specified)}" | tee -a "${LOG_FILE}"
+    exit_script(sys_exit.code)
-echo "" | tee -a "${LOG_FILE}"
+  except: # pylint: disable=bare-except
-echo -e "${BLUE}Destination${CLEAR}" | tee -a "${LOG_FILE}"
+    major_exception()
-lsblk -n -o NAME,LABEL,SIZE,MODEL,SERIAL "${DEST_DEV}" | tee -a "${LOG_FILE}"
-if [[ "${USE_MBR}" == "True" ]]; then
-    echo -e "${YELLOW}Formatting using legacy MBR${CLEAR}" | tee -a "${LOG_FILE}"
-fi
-echo "" | tee -a "${LOG_FILE}"
 
-# Ask before starting job
+  try:
-echo ""
+    # Verify selections
-if ask "Is the above information correct?"; then
+    ufd_dev = verify_ufd(args['--ufd-device'])
-    echo ""
+    sources = verify_sources(args, UFD_SOURCES)
-    echo -e "${YELLOW}SAFETY CHECK${CLEAR}"
+    show_selections(args, sources, ufd_dev, UFD_SOURCES)
-    echo "All data will be DELETED from the disk and partition(s) listed above."
+    if not args['--force']:
-    echo -e "This is irreversible and will lead to ${RED}DATA LOSS.${CLEAR}"
+      confirm_selections(args)
-    if ! ask "Asking again to confirm, is this correct?"; then
-        abort
-    fi
-else
-    abort
-fi
 
-# Start Build
+    # Prep UFD
-echo "" | tee -a "${LOG_FILE}"
+    print_info('Prep UFD')
-echo -e "${GREEN}Building Kit${CLEAR}" | tee -a "${LOG_FILE}"
+    if not args['--update']:
-touch "${LOG_FILE}"
+      prep_device(ufd_dev, UFD_LABEL, use_mbr=args['--use-mbr'])
-tmux split-window -dl 10 tail -f "${LOG_FILE}"
 
-# Zero beginning of device
+    # Mount UFD
-dd bs=4M count=16 if=/dev/zero of="${DEST_DEV}" >> "${LOG_FILE}" 2>&1
+    try_and_print(
+      indent=2,
+      message='Mounting UFD...',
+      function=mount,
+      mount_source=find_first_partition(ufd_dev),
+      mount_point='/mnt/UFD',
+      read_write=True,
+      )
 
-# Format
+    # Remove Arch folder
-echo "Formatting drive..." | tee -a "${LOG_FILE}"
+    if args['--update']:
-if [[ "${USE_MBR}" == "True" ]]; then
+      try_and_print(
-    parted "${DEST_DEV}" --script -- mklabel msdos mkpart primary fat32 4MiB -1s >> "${LOG_FILE}" 2>&1
+        indent=2,
-    parted "${DEST_DEV}" set 1 boot on >> "${LOG_FILE}" 2>&1
+        message='Removing Linux...',
-else
+        function=remove_arch,
-    parted "${DEST_DEV}" --script -- mklabel gpt mkpart primary fat32 4MiB -4MiB >> "${LOG_FILE}" 2>&1
+        )
-    parted "${DEST_DEV}" set 1 legacy_boot on >> "${LOG_FILE}" 2>&1
-    #parted "${DEST_DEV}" disk_set pmbr_boot on >> "${LOG_FILE}" 2>&1
-    # pmbr_boot breaks detection on some UEFI MOBOs
-fi
-mkfs.vfat -F 32 -n "${UFD_LABEL}" "${DEST_PAR}" >> "${LOG_FILE}" 2>&1
 
-# Mount sources and dest
+    # Copy sources
-echo "Mounting sources and destination..." | tee -a "${LOG_FILE}"
+    print_standard(' ')
-mkdir /mnt/{Dest,Linux,WinPE} -p >> "${LOG_FILE}" 2>&1
+    print_info('Copy Sources')
-mount ${DEST_PAR} /mnt/Dest >> "${LOG_FILE}" 2>&1
+    for s_label, s_path in sources.items():
-mount "${LINUX_ISO}" /mnt/Linux -r >> "${LOG_FILE}" 2>&1
+      try_and_print(
-if [[ ! -z "${arg_w:-}" ]]; then
+        indent=2,
-  mount "${WINPE_ISO}" /mnt/WinPE -r >> "${LOG_FILE}" 2>&1
+        message='Copying {}...'.format(s_label),
-fi
+        function=copy_source,
+        source=s_path,
+        items=ITEMS[s_label],
+        overwrite=True,
+        )
 
-# Find WinPE source
+    # Update boot entries
-w_boot="$(find /mnt/WinPE -iwholename "/mnt/WinPE/Boot")"
+    print_standard(' ')
-w_boot_bcd="$(find /mnt/WinPE -iwholename "/mnt/WinPE/Boot/BCD")"
+    print_info('Boot Setup')
-w_boot_sdi="$(find /mnt/WinPE -iwholename "/mnt/WinPE/Boot/boot.sdi")"
+    try_and_print(
-w_bootmgr="$(find /mnt/WinPE -iwholename "/mnt/WinPE/bootmgr")"
+      indent=2,
-w_bootmgr_efi="$(find /mnt/WinPE -iwholename "/mnt/WinPE/bootmgr.efi")"
+      message='Updating boot entries...',
-w_efi_boot="$(find /mnt/WinPE -iwholename "/mnt/WinPE/EFI/Boot")"
+      function=update_boot_entries,
-w_efi_microsoft="$(find /mnt/WinPE -iwholename "/mnt/WinPE/EFI/Microsoft")"
+      boot_entries=BOOT_ENTRIES,
-w_en_us="$(find /mnt/WinPE -iwholename "/mnt/WinPE/en-us")"
+      boot_files=BOOT_FILES,
-w_sources="$(find /mnt/WinPE -iwholename "/mnt/WinPE/sources")"
+      iso_label=ISO_LABEL,
+      ufd_label=UFD_LABEL,
+      )
 
-# Copy files
+    # Install syslinux (to partition)
-echo "Copying Linux files..." | tee -a "${LOG_FILE}"
+    try_and_print(
-rsync ${RSYNC_ARGS} /mnt/Linux/* /mnt/Dest/ >> "${LOG_FILE}" 2>&1
+      indent=2,
-sed -i "s/${ISO_LABEL}/${UFD_LABEL}/" /mnt/Dest/EFI/boot/refind.conf
+      message='Syslinux (partition)...',
-sed -i "s/${ISO_LABEL}/${UFD_LABEL}/" /mnt/Dest/arch/boot/syslinux/*cfg
+      function=install_syslinux_to_partition,
+      partition=find_first_partition(ufd_dev),
+      )
 
-echo "Copying WinPE files..." | tee -a "${LOG_FILE}"
+    # Unmount UFD
-if [[ ! -z "${arg_w:-}" ]]; then
+    try_and_print(
-  if [[ ! -z "${w_bootmgr:-}" ]]; then
+      indent=2,
-    rsync ${RSYNC_ARGS} "${w_bootmgr}" /mnt/Dest/ >> "${LOG_FILE}" 2>&1
+      message='Unmounting UFD...',
-  fi
+      function=unmount,
-  if [[ ! -z "${w_bootmgr_efi:-}" ]]; then
+      mount_point='/mnt/UFD',
-    rsync ${RSYNC_ARGS} "${w_bootmgr_efi}" /mnt/Dest/ >> "${LOG_FILE}" 2>&1
+      )
-  fi
-  if [[ ! -z "${w_en_us:-}" ]]; then
-    rsync ${RSYNC_ARGS} "${w_en_us}" /mnt/Dest/ >> "${LOG_FILE}" 2>&1
-  fi
-  if [[ ! -z "${w_boot:-}" ]]; then
-    rsync ${RSYNC_ARGS} "${w_boot}"/* /mnt/Dest/Boot/ >> "${LOG_FILE}" 2>&1
-  fi
-  if [[ ! -z "${w_efi_boot:-}" ]]; then
-    rsync ${RSYNC_ARGS} "${w_efi_boot}"/* /mnt/Dest/EFI/Microsoft/ >> "${LOG_FILE}" 2>&1
-  fi
-  if [[ ! -z "${w_efi_microsoft:-}" ]]; then
-    rsync ${RSYNC_ARGS} "${w_efi_microsoft}"/* /mnt/Dest/EFI/Microsoft/ >> "${LOG_FILE}" 2>&1
-  fi
-  if [[ ! -z "${w_boot_bcd:-}" ]]; then
-    rsync ${RSYNC_ARGS} "${w_boot_bcd}" /mnt/Dest/sources/ >> "${LOG_FILE}" 2>&1
-  fi
-  if [[ ! -z "${w_boot_sdi:-}" ]]; then
-    rsync ${RSYNC_ARGS} "${w_boot_sdi}" /mnt/Dest/sources/ >> "${LOG_FILE}" 2>&1
-  fi
-  if [[ ! -z "${w_bootmgr:-}" ]]; then
-    rsync ${RSYNC_ARGS} "${w_bootmgr}" /mnt/Dest/sources/ >> "${LOG_FILE}" 2>&1
-  fi
-  if [[ ! -z "${w_sources:-}" ]]; then
-    rsync ${RSYNC_ARGS} "${w_sources}"/* /mnt/Dest/sources/ >> "${LOG_FILE}" 2>&1
-  fi
 
-  # Uncomment boot entries
+    # Install syslinux (to device)
-  sed -i "s/#UFD-WINPE#//" /mnt/Dest/EFI/boot/refind.conf
+    try_and_print(
-  sed -i "s/#UFD-WINPE#//" /mnt/Dest/arch/boot/syslinux/*cfg
+      indent=2,
-fi
+      message='Syslinux (device)...',
+      function=install_syslinux_to_dev,
+      ufd_dev=ufd_dev,
+      use_mbr=args['--use-mbr'],
+      )
 
-echo "Copying Main Kit..." | tee -a "${LOG_FILE}"
+    # Hide items
-if [[ ! -z "${arg_m:-}" ]]; then
+    print_standard(' ')
-  rsync ${RSYNC_ARGS} \
+    print_info('Final Touches')
-    "${MAIN_KIT}/" \
+    try_and_print(
-    "/mnt/Dest/${KIT_NAME_FULL}/" >> "${LOG_FILE}" 2>&1
+      indent=2,
-fi
+      message='Hiding items...',
-
+      function=hide_items,
-if [[ ! -z "${EXTRA_DIR:-}" ]]; then
+      ufd_dev=ufd_dev,
-    echo "Copying Extra files..." | tee -a "${LOG_FILE}"
+      items=ITEMS_HIDDEN,
-    rsync ${RSYNC_ARGS} \
+      )
-      "${EXTRA_DIR}"/ \
-      /mnt/Dest/ >> "${LOG_FILE}" 2>&1
-fi
-
-# Install syslinux
-echo "Copying Syslinux files..." | tee -a "${LOG_FILE}"
-rsync ${RSYNC_ARGS} /usr/lib/syslinux/bios/*.c32 /mnt/Dest/arch/boot/syslinux/ >> "${LOG_FILE}" 2>&1
-syslinux --install -d /arch/boot/syslinux/ ${DEST_PAR} >> "${LOG_FILE}" 2>&1
-
-echo "Unmounting destination..." | tee -a "${LOG_FILE}"
-umount /mnt/Dest >> "${LOG_FILE}" 2>&1
-rmdir /mnt/Dest >> "${LOG_FILE}" 2>&1
-sync
-
-echo "Installing Syslinux MBR..." | tee -a "${LOG_FILE}"
-if [[ "${USE_MBR}" == "True" ]]; then
-    dd bs=440 count=1 if=/usr/lib/syslinux/bios/mbr.bin of=${DEST_DEV} >> "${LOG_FILE}" 2>&1
-else
-    dd bs=440 count=1 if=/usr/lib/syslinux/bios/gptmbr.bin of=${DEST_DEV} >> "${LOG_FILE}" 2>&1
-fi
-sync
-
-# Cleanup
-echo "Hiding boot files..." | tee -a "${LOG_FILE}"
-echo "drive s: file=\"${DEST_PAR}\"" > /root/.mtoolsrc
-echo 'mtools_skip_check=1' >> /root/.mtoolsrc
-for item in arch Boot bootmgr{,.efi} EFI en-us images isolinux sources "${KIT_NAME_FULL}"/{.bin,.cbin}; do
-    yes | mattrib +h "S:/${item}" >> "${LOG_FILE}" 2>&1 || true
-done
-sync
-
-# Unmount Sources
-echo "Unmounting sources..." | tee -a "${LOG_FILE}"
-for d in Linux WinPE; do
-    umount "/mnt/${d}" >> "${LOG_FILE}" 2>&1 || true
-    rmdir "/mnt/${d}" >> "${LOG_FILE}" 2>&1 || true
-done
-
-# Close progress pane
-pkill -f "tail.*${LOG_FILE}"
 
     # Done
-echo "" | tee -a "${LOG_FILE}"
+    if not args['--force']:
-echo "Done." | tee -a "${LOG_FILE}"
+      print_standard('\nDone.')
-echo ""
+      pause('Press Enter to exit...')
-exit 0
+    exit_script()
+  except SystemExit as sys_exit:
+    exit_script(sys_exit.code)
+  except: # pylint: disable=bare-except
+    major_exception()

.bin/Scripts/cbs_fix.py

@@ -35,8 +35,8 @@ if __name__ == '__main__':
     print_standard('\nDone.')
     pause("Press Enter to exit...")
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/check_disk.py

@@ -49,8 +49,8 @@ if __name__ == '__main__':
     print_success('Done.')
     pause("Press Enter to exit...")
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/connect-to-network

@@ -1,30 +0,0 @@
-#!/bin/python3
-#
-## Wizard Kit: Network connection tool
-
-import os
-import sys
-
-# Init
-sys.path.append(os.path.dirname(os.path.realpath(__file__)))
-from functions.network import *
-init_global_vars()
-
-if __name__ == '__main__':
-  try:
-    # Prep
-    clear_screen()
-
-    # Connect
-    connect_to_network()
-
-    # Done
-    print_standard('\nDone.')
-    #pause("Press Enter to exit...")
-    exit_script()
-  except SystemExit:
-    pass
-  except:
-    major_exception()
-
-# vim: sts=2 sw=2 ts=2

.bin/Scripts/ddrescue-tui-menu

@@ -54,8 +54,8 @@ if __name__ == '__main__':
       msg = str(ge)
     print_error(msg)
     abort()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/debug/hw_diags.py

@@ -149,11 +149,14 @@ def save_debug_reports(state, global_vars):
         f.write('{}\n'.format(line))
 
 
-def upload_logdir(global_vars):
+def upload_logdir(global_vars, reason='Crash'):
   """Upload compressed LogDir to CRASH_SERVER."""
   source = global_vars['LogDir']
   source = source[source.rfind('/')+1:]
-  dest = '{}.txz'.format(source)
+  dest = 'HW-Diags_{reason}_{Date-Time}.txz'.format(
+    reason=reason,
+    **global_vars,
+    )
   data = None
 
   # Compress LogDir
@@ -166,7 +169,7 @@ def upload_logdir(global_vars):
     data = f.read()
 
   # Upload data
-  url = '{}/Crash_{}.txz'.format(CRASH_SERVER['Url'], source)
+  url = '{}/{}'.format(CRASH_SERVER['Url'], dest)
   r = requests.put(
     url,
     data=data,

.bin/Scripts/dism.py

@@ -50,8 +50,8 @@ if __name__ == '__main__':
     print_success('Done.')
     pause("Press Enter to exit...")
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/find_user_wallpapers.py

@@ -73,8 +73,8 @@ if __name__ == '__main__':
 
     # Done
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/functions/browsers.py

@@ -9,11 +9,11 @@ from settings.browsers import *
 browser_data = {}
 other_results = {
   'Error': {
-    'MultipleInstallationsError': 'Multiple installations detected',
+    'MultipleInstallationsError': 'MULTIPLE INSTALLATIONS DETECTED',
     },
   'Warning': {
-    'NotInstalledError': 'Not installed',
+    'NotInstalledError': 'NOT INSTALLED',
-    'NoProfilesError': 'No profiles found',
+    'NoProfilesError': 'NO PROFILES FOUND',
     }
   }
 
@@ -32,8 +32,8 @@ def archive_all_users():
     user_path = os.path.join(users_root, user_name)
     appdata_local = os.path.join(user_path, r'AppData\Local')
     appdata_roaming = os.path.join(user_path, r'AppData\Roaming')
-    valid_user &= os.path.exists(appdata_local)
+    valid_user = valid_user and os.path.exists(appdata_local)
-    valid_user &= os.path.exists(appdata_roaming)
+    valid_user = valid_user and os.path.exists(appdata_roaming)
     if valid_user:
       user_envs.append({
         'USERNAME': user_name,
@@ -319,13 +319,15 @@ def get_mozilla_profiles(search_path, dev=False):
   return profiles
 
 
-def install_adblock(indent=8, width=32, just_firefox=False):
+def install_adblock(
+    indent=8, width=32, just_firefox=False, skip_firefox=False):
   """Install adblock for all supported browsers."""
   for browser in sorted(browser_data):
     if just_firefox and browser_data[browser]['base'] != 'mozilla':
       continue
+    if skip_firefox and browser_data[browser]['base'] == 'mozilla':
+      continue
     exe_path = browser_data[browser].get('exe_path', None)
-    function=run_program
     if not exe_path:
       if browser_data[browser]['profiles']:
         print_standard(
@@ -375,7 +377,6 @@ def install_adblock(indent=8, width=32, just_firefox=False):
 
       elif browser_data[browser]['base'] == 'ie':
         urls.append(IE_GALLERY)
-        function=popen_program
 
       # By using check=False we're skipping any return codes so
       # it should only fail if the program can't be run
@@ -384,7 +385,7 @@ def install_adblock(indent=8, width=32, just_firefox=False):
       #   installation status.
       try_and_print(message='{}...'.format(browser),
         indent=indent, width=width,
-        cs='Done', function=function,
+        cs='STARTED', function=popen_program,
         cmd=[exe_path, *urls], check=False)
 
 
@@ -425,6 +426,12 @@ def list_homepages(indent=8, width=32):
             indent=' '*indent, width=width, name=name, page=page))
 
 
+def profile_present(browser_name):
+  """Checks if a profile was detected for browser, returns bool."""
+  browser_name = browser_name.replace(' Chromium', '')
+  return bool(browser_data.get(browser_name, {}).get('profiles', False))
+
+
 def reset_browsers(indent=8, width=32):
   """Reset all detected browsers to safe defaults."""
   browser_list = [k for k, v in sorted(browser_data.items()) if v['profiles']]
@@ -458,7 +465,7 @@ def scan_for_browsers(just_firefox=False, silent=False, skip_ie=False):
         pass
     else:
       try_and_print(message='{}...'.format(name),
-        function=get_browser_details, cs='Detected',
+        function=get_browser_details, cs='DETECTED',
         other_results=other_results, name=name)
 
 

.bin/Scripts/functions/cleanup.py

@@ -1,49 +1,7 @@
 # Wizard Kit: Functions - Cleanup
 
 from functions.setup import *
-
+from settings.cleanup import *
-# STATIC VARIABLES
-D7_HKCR_CLEANUP = {
-  r'batfile\shell\!!RunWithParms': {'Recurse': True},
-  r'batfile\shell\{0001B4FD-9EA3-4D90-A79E-FD14BA3AB01D}': {'Recurse': True},
-  r'cmdfile\shell\!!RunWithParms': {'Recurse': True},
-  r'cmdfile\shell\{0001B4FD-9EA3-4D90-A79E-FD14BA3AB01D}': {'Recurse': True},
-  r'exefile\shell\!!RunWithParms': {'Recurse': True},
-  r'exefile\shell\ResourceHacker': {'Recurse': True},
-  r'regfile\shell\!!RunWithParms': {'Recurse': True},
-  r'regfile\shell\{0001B4FD-9EA3-4D90-A79E-FD14BA3AB01D}': {'Recurse': True},
-  }
-D7_HKCU_CLEANUP = {
-  r'Software\Malwarebytes': {'Recurse': False},
-  }
-D7_HKLM_CLEANUP = {
-  r'Software\Emsisoft': {'Recurse': False},
-  }
-HKU =  winreg.HKEY_USERS
-HKCR = winreg.HKEY_CLASSES_ROOT
-HKCU = winreg.HKEY_CURRENT_USER
-HKLM = winreg.HKEY_LOCAL_MACHINE
-UAC_DEFAULTS_WIN7 = {
-  r'Software\Microsoft\Windows\CurrentVersion\Policies\System': {
-    'DWORD Items': {
-      'ConsentPromptBehaviorAdmin': 5,
-      'EnableLUA': 1,
-      'PromptOnSecureDesktop': 1,
-      },
-    },
-  }
-UAC_DEFAULTS_WIN10 = {
-  r'Software\Microsoft\Windows\CurrentVersion\Policies\System': {
-    'DWORD Items': {
-      'ConsentPromptBehaviorAdmin': 5,
-      'ConsentPromptBehaviorUser': 3,
-      'EnableInstallerDetection': 1,
-      'EnableLUA': 1,
-      'EnableVirtualization': 1,
-      'PromptOnSecureDesktop': 1,
-      },
-    },
-  }
 
 
 def cleanup_adwcleaner():
@@ -195,8 +153,7 @@ def cleanup_desktop():
 
   desktop_path = r'{USERPROFILE}\Desktop'.format(**global_vars['Env'])
   for entry in os.scandir(desktop_path):
-    # JRT, RKill, Shortcut cleaner
+    if DESKTOP_ITEMS.search(entry.name):
-    if re.search(r'^(JRT|RKill|sc-cleaner)', entry.name, re.IGNORECASE):
       dest_name = r'{}\{}'.format(dest_folder, entry.name)
       dest_name = non_clobber_rename(dest_name)
       shutil.move(entry.path, dest_name)

.bin/Scripts/functions/common.py

@@ -64,10 +64,13 @@ class GenericRepair(Exception):
 class MultipleInstallationsError(Exception):
   pass
 
-class NotInstalledError(Exception):
+class NoProfilesError(Exception):
   pass
 
-class NoProfilesError(Exception):
+class Not4KAlignedError(Exception):
+  pass
+
+class NotInstalledError(Exception):
   pass
 
 class OSInstalledLegacyError(Exception):
@@ -88,14 +91,21 @@ class SecureBootNotAvailError(Exception):
 class SecureBootUnknownError(Exception):
   pass
 
+class WindowsOutdatedError(Exception):
+  pass
+
+class WindowsUnsupportedError(Exception):
+  pass
+
 
 # General functions
-def abort():
+def abort(show_prompt=True):
   """Abort script."""
   print_warning('Aborted.')
+  if show_prompt:
     sleep(1)
     pause(prompt='Press Enter to exit... ')
-  exit_script()
+  exit_script(1)
 
 
 def ask(prompt='Kotaero!'):
@@ -163,18 +173,22 @@ def clear_screen():
 def convert_to_bytes(size):
   """Convert human-readable size str to bytes and return an int."""
   size = str(size)
-  tmp = re.search(r'(\d+\.?\d*)\s+([KMGT]B)', size.upper())
+  tmp = re.search(r'(\d+\.?\d*)\s+([PTGMKB])B?', size.upper())
   if tmp:
     size = float(tmp.group(1))
     units = tmp.group(2)
-    if units == 'TB':
+    if units == 'P':
-      size *= 1099511627776
+      size *= 1024 ** 5
-    elif units == 'GB':
+    if units == 'T':
-      size *= 1073741824
+      size *= 1024 ** 4
-    elif units == 'MB':
+    elif units == 'G':
-      size *= 1048576
+      size *= 1024 ** 3
-    elif units == 'KB':
+    elif units == 'M':
-      size *= 1024
+      size *= 1024 ** 2
+    elif units == 'K':
+      size *= 1024 ** 1
+    elif units == 'B':
+      size *= 1024 ** 0
     size = int(size)
   else:
     return -1
@@ -293,20 +307,24 @@ def human_readable_size(size, decimals=0):
     return '{size:>{width}} b'.format(size='???', width=width)
 
   # Convert to sensible units
-  if size >= 1099511627776:
+  if size >= 1024 ** 5:
-    size /= 1099511627776
+    size /= 1024 ** 5
-    units = 'Tb'
+    units = 'PB'
-  elif size >= 1073741824:
+  elif size >= 1024 ** 4:
-    size /= 1073741824
+    size /= 1024 ** 4
-    units = 'Gb'
+    units = 'TB'
-  elif size >= 1048576:
+  elif size >= 1024 ** 3:
-    size /= 1048576
+    size /= 1024 ** 3
-    units = 'Mb'
+    units = 'GB'
-  elif size >= 1024:
+  elif size >= 1024 ** 2:
-    size /= 1024
+    size /= 1024 ** 2
-    units = 'Kb'
+    units = 'MB'
+  elif size >= 1024 ** 1:
+    size /= 1024 ** 1
+    units = 'KB'
   else:
-    units = ' b'
+    size /= 1024 ** 0
+    units = ' B'
 
   # Return
   return '{size:>{width}.{decimals}f} {units}'.format(
@@ -421,6 +439,8 @@ def non_clobber_rename(full_path):
 
 def pause(prompt='Press Enter to continue... '):
   """Simple pause implementation."""
+  if prompt[-1] != ' ':
+    prompt += ' '
   input(prompt)
 
 
@@ -890,20 +910,14 @@ def set_common_vars():
   global_vars['Env'] =              os.environ.copy()
 
   global_vars['ArchivePassword'] =  ARCHIVE_PASSWORD
-  global_vars['BinDir'] =       r'{BaseDir}\.bin'.format(
+  global_vars['BinDir'] =           r'{BaseDir}\.bin'.format(**global_vars)
-    **global_vars)
+  global_vars['CBinDir'] =          r'{BaseDir}\.cbin'.format(**global_vars)
-  global_vars['CBinDir'] =      r'{BaseDir}\.cbin'.format(
-    **global_vars)
   global_vars['ClientDir'] =        r'{SYSTEMDRIVE}\{prefix}'.format(
                                       prefix=KIT_NAME_SHORT, **global_vars['Env'])
-  global_vars['BackupDir'] =      r'{ClientDir}\Backups'.format(
+  global_vars['BackupDir'] =        r'{ClientDir}\Backups'.format(**global_vars)
-    **global_vars)
+  global_vars['LogDir'] =           r'{ClientDir}\Logs\{Date}'.format(**global_vars)
-  global_vars['LogDir'] =       r'{ClientDir}\Logs\{Date}'.format(
+  global_vars['QuarantineDir'] =    r'{ClientDir}\Quarantine'.format(**global_vars)
-    **global_vars)
+  global_vars['TmpDir'] =           r'{BinDir}\tmp'.format(**global_vars)
-  global_vars['QuarantineDir'] =    r'{ClientDir}\Quarantine'.format(
-    **global_vars)
-  global_vars['TmpDir'] =       r'{BinDir}\tmp'.format(
-    **global_vars)
 
 
 def set_linux_vars():
@@ -916,7 +930,7 @@ def set_linux_vars():
   global_vars['Date-Time'] =        time.strftime("%Y-%m-%d_%H%M_%z")
   global_vars['Env'] =              os.environ.copy()
   global_vars['BinDir'] =           '/usr/local/bin'
-  global_vars['LogDir'] =       global_vars['TmpDir']
+  global_vars['LogDir'] =           '{}/Logs'.format(global_vars['Env']['HOME'])
   global_vars['Tools'] = {
     'wimlib-imagex': 'wimlib-imagex',
     'SevenZip': '7z',
@@ -925,6 +939,9 @@ def set_linux_vars():
 
 def set_log_file(log_name):
   """Sets global var LogFile and creates path as needed."""
+  if psutil.LINUX:
+    folder_path = global_vars['LogDir']
+  else:
     folder_path = '{}{}{}'.format(
       global_vars['LogDir'],
       os.sep,

.bin/Scripts/functions/data.py

@@ -111,7 +111,7 @@ def find_core_storage_volumes(device_path=None):
 
     # Check log for found volumes
     cs_vols = {}
-    with open(log_path, 'r') as f:
+    with open(log_path, 'r', encoding='utf-8', errors='ignore') as f:
       for line in f.readlines():
         r = re.match(
           r'^.*echo "([^"]+)" . dmsetup create test(\d)$',
@@ -151,12 +151,16 @@ def is_valid_wim_file(item):
 def get_mounted_volumes():
   """Get mounted volumes, returns dict."""
   cmd = [
-    'findmnt', '-J', '-b', '-i',
+    'findmnt',
-    '-t', (
+    '--list',
+    '--json',
+    '--bytes',
+    '--invert',
+    '--types', (
       'autofs,binfmt_misc,bpf,cgroup,cgroup2,configfs,debugfs,devpts,'
       'devtmpfs,hugetlbfs,mqueue,proc,pstore,securityfs,sysfs,tmpfs'
       ),
-    '-o', 'SOURCE,TARGET,FSTYPE,LABEL,SIZE,AVAIL,USED']
+    '--output', 'SOURCE,TARGET,FSTYPE,LABEL,SIZE,AVAIL,USED']
   json_data = get_json_from_command(cmd)
   mounted_volumes = []
   for item in json_data.get('filesystems', []):
@@ -195,6 +199,8 @@ def mount_volumes(
         volumes.update({child['name']: child})
       for grandchild in child.get('children', []):
         volumes.update({grandchild['name']: grandchild})
+        for great_grandchild in grandchild.get('children', []):
+          volumes.update({great_grandchild['name']: great_grandchild})
 
   # Get list of mounted volumes
   mounted_volumes = get_mounted_volumes()
@@ -239,9 +245,13 @@ def mount_volumes(
       else:
         fstype = vol_data.get('fstype', 'UNKNOWN FS')
         size_used = human_readable_size(
-          mounted_volumes[vol_path]['used'])
+          mounted_volumes[vol_path]['used'],
+          decimals=1,
+          )
         size_avail = human_readable_size(
-          mounted_volumes[vol_path]['avail'])
+          mounted_volumes[vol_path]['avail'],
+          decimals=1,
+          )
         vol_data['size_avail'] = size_avail
         vol_data['size_used'] = size_used
         vol_data['mount_point'] = mounted_volumes[vol_path]['target']
@@ -283,6 +293,14 @@ def mount_backup_shares(read_write=False):
 
 def mount_network_share(server, read_write=False):
   """Mount a network share defined by server."""
+  uid = '1000'
+
+  # Get UID
+  cmd = ['id', '--user', 'tech']
+  result = run_program(cmd, check=False, encoding='utf-8', errors='ignore')
+  if result.stdout.strip().isnumeric():
+    uid = result.stdout.strip()
+
   if read_write:
     username = server['RW-User']
     password = server['RW-Pass']
@@ -298,18 +316,35 @@ def mount_network_share(server, read_write=False):
     error = r'Failed to mount \\{Name}\{Share} ({IP})'.format(**server)
     success = 'Mounted {Name}'.format(**server)
   elif psutil.LINUX:
+    # Make mountpoint
     cmd = [
       'sudo', 'mkdir', '-p',
       '/Backups/{Name}'.format(**server)]
     run_program(cmd)
+
+    # Set mount options
+    cmd_options = [
+      # Assuming GID matches UID
+      'gid={}'.format(uid),
+      'uid={}'.format(uid),
+      ]
+    cmd_options.append('rw' if read_write else 'ro')
+    cmd_options.append('username={}'.format(username))
+    if password:
+      cmd_options.append('password={}'.format(password))
+    else:
+      # Skip password check
+      cmd_options.append('guest')
+
+    # Set mount command
     cmd = [
       'sudo', 'mount',
-      '//{IP}/{Share}'.format(**server),
+      '//{IP}/{Share}'.format(**server).replace('\\', '/'),
       '/Backups/{Name}'.format(**server),
-      '-o', '{}username={},password={}'.format(
+      '-o', ','.join(cmd_options),
-        '' if read_write else 'ro,',
+      ]
-        username,
+
-        password)]
+    # Set result messages
     warning = 'Failed to mount /Backups/{Name}, {IP} unreachable.'.format(
       **server)
     error = 'Failed to mount /Backups/{Name}'.format(**server)

.bin/Scripts/functions/hw_diags.py

@@ -59,6 +59,13 @@ class CpuObj():
     report.append('{BLUE}Device{CLEAR}'.format(**COLORS))
     report.append('  {}'.format(self.name))
 
+    # Include RAM details
+    ram_details = get_ram_details()
+    ram_total = human_readable_size(ram_details.pop('Total', 0)).strip()
+    ram_dimms = ['{}x {}'.format(v, k) for k, v in sorted(ram_details.items())]
+    report.append('{BLUE}RAM{CLEAR}'.format(**COLORS))
+    report.append('  {} ({})'.format(ram_total, ', '.join(ram_dimms)))
+
     # Tests
     for test in self.tests.values():
       report.extend(test.report)
@@ -87,7 +94,15 @@ class DiskObj():
     self.get_size()
 
     # Try enabling SMART
-    run_program(['sudo', 'smartctl', '--smart=on', self.path], check=False)
+    run_program(
+      cmd=[
+        'sudo',
+        'smartctl',
+        '--tolerance=permissive',
+        '--smart=on',
+        self.path,
+        ],
+      check=False)
 
     # Get NVMe/SMART data and set description
     self.get_smart_details()
@@ -181,8 +196,8 @@ class DiskObj():
             disk_ok = False
 
             # Disable override if necessary
-            self.override_disabled |= ATTRIBUTES[attr_type][k].get(
+            if ATTRIBUTES[attr_type][k].get('Critical', False):
-              'Critical', False)
+              self.override_disabled = True
 
     # SMART overall assessment
     ## NOTE: Only fail drives if the overall value exists and reports failed
@@ -303,6 +318,11 @@ class DiskObj():
         attr_type=self.attr_type, **COLORS))
       report.extend(sorted(self.nvme_smart_notes.keys()))
 
+    # 4K alignment check
+    if not self.is_4k_aligned():
+      report.append('{YELLOW}Warning{CLEAR}'.format(**COLORS))
+      report.append('  One or more partitions are not 4K aligned')
+
     # Tests
     for test in self.tests.values():
       report.extend(test.report)
@@ -353,8 +373,15 @@ class DiskObj():
 
   def get_smart_details(self):
     """Get data from smartctl."""
-    cmd = ['sudo', 'smartctl', '--all', '--json', self.path]
+    cmd = [
-    self.smartctl = get_json_from_command(cmd)
+      'sudo',
+      'smartctl',
+      '--tolerance=verypermissive',
+      '--all',
+      '--json',
+      self.path,
+      ]
+    self.smartctl = get_json_from_command(cmd, check=False)
 
     # Check for attributes
     if KEY_NVME in self.smartctl:
@@ -399,6 +426,26 @@ class DiskObj():
             'self_test', {}).get(
             k, {})
 
+  def is_4k_aligned(self):
+    """Check if partitions are 4K aligned, returns bool."""
+    cmd = [
+      'sudo',
+      'sfdisk',
+      '--json',
+      self.path,
+      ]
+    aligned = True
+
+    # Get partition details
+    json_data = get_json_from_command(cmd)
+
+    # Check partitions
+    for part in json_data.get('partitiontable', {}).get('partitions', []):
+      aligned = aligned and part.get('start', -1) % 4096 == 0
+
+    # Done
+    return aligned
+
   def safety_check(self, silent=False):
     """Run safety checks and disable tests if necessary."""
     test_running = False
@@ -459,6 +506,7 @@ class DiskObj():
 class State():
   """Object to track device objects and overall state."""
   def __init__(self):
+    self.args = None
     self.cpu = None
     self.disks = []
     self.ost = osTicket(TESTS_CPU, TESTS_DISK)
@@ -489,6 +537,83 @@ class State():
     self.ticket_name = None
     self.ticket_id = None
 
+  def build_outer_panes(self):
+    """Build top and side panes."""
+    clear_screen()
+
+    # Top
+    self.panes['Top'] = tmux_split_window(
+      behind=True, lines=2, vertical=True,
+      text=TOP_PANE_TEXT)
+
+    # Started
+    self.panes['Started'] = tmux_split_window(
+      lines=SIDE_PANE_WIDTH, target_pane=self.panes['Top'],
+      text='{BLUE}Started{CLEAR}\n{s}'.format(
+        s=time.strftime("%Y-%m-%d %H:%M %Z"),
+        **COLORS))
+
+    # Progress
+    self.panes['Progress'] = tmux_split_window(
+      lines=SIDE_PANE_WIDTH,
+      watch=self.progress_out)
+
+  def fix_tmux_panes(self):
+    """Fix pane sizes if the window has been resized."""
+    needs_fixed = False
+
+    # Bail?
+    if not self.panes:
+      return
+
+    # Check layout
+    for k, v in self.tmux_layout.items():
+      if not  v.get('Check'):
+        # Not concerned with the size of this pane
+        continue
+      # Get target
+      target = None
+      if k != 'Current':
+        if k not in self.panes:
+          # Skip missing panes
+          continue
+        else:
+          target = self.panes[k]
+
+      # Check pane size
+      x, y = tmux_get_pane_size(pane_id=target)
+      if v.get('x', False) and v['x'] != x:
+        needs_fixed = True
+      if v.get('y', False) and v['y'] != y:
+        needs_fixed = True
+
+    # Bail?
+    if not needs_fixed:
+      return
+
+    # Update layout
+    for k, v in self.tmux_layout.items():
+      # Get target
+      target = None
+      if k != 'Current':
+        if k not in self.panes:
+          # Skip missing panes
+          continue
+        else:
+          target = self.panes[k]
+
+      # Resize pane
+      tmux_resize_pane(pane_id=target, **v)
+
+  def fix_tmux_panes_loop(self):
+    while True:
+      try:
+        self.fix_tmux_panes()
+        sleep(1)
+      except RuntimeError:
+        # Assuming layout definitions changes mid-run, ignoring
+        pass
+
   def init(self):
     """Remove test objects, set log, and add devices."""
     self.disks = []
@@ -534,7 +659,7 @@ class State():
 
     # Start tmux thread
     self.tmux_layout = TMUX_LAYOUT.copy()
-    start_thread(fix_tmux_panes_loop, args=[self])
+    start_thread(self.fix_tmux_panes_loop)
 
   def set_top_pane_text(self, text):
     """Set top pane text using TOP_PANE_TEXT and provided text."""
@@ -578,28 +703,6 @@ class TestObj():
 
 
 # Functions
-def build_outer_panes(state):
-  """Build top and side panes."""
-  clear_screen()
-
-  # Top
-  state.panes['Top'] = tmux_split_window(
-    behind=True, lines=2, vertical=True,
-    text=TOP_PANE_TEXT)
-
-  # Started
-  state.panes['Started'] = tmux_split_window(
-    lines=SIDE_PANE_WIDTH, target_pane=state.panes['Top'],
-    text='{BLUE}Started{CLEAR}\n{s}'.format(
-      s=time.strftime("%Y-%m-%d %H:%M %Z"),
-      **COLORS))
-
-  # Progress
-  state.panes['Progress'] = tmux_split_window(
-    lines=SIDE_PANE_WIDTH,
-    watch=state.progress_out)
-
-
 def build_status_string(label, status, info_label=False):
   """Build status string with appropriate colors."""
   status_color = COLORS['CLEAR']
@@ -616,64 +719,6 @@ def build_status_string(label, status, info_label=False):
     **COLORS)
 
 
-def fix_tmux_panes_loop(state):
-  while True:
-    try:
-      fix_tmux_panes(state)
-      sleep(1)
-    except RuntimeError:
-      # Assuming layout definitions changes mid-run, ignoring
-      pass
-
-
-def fix_tmux_panes(state):
-  """Fix pane sizes if the window has been resized."""
-  needs_fixed = False
-
-  # Bail?
-  if not state.panes:
-    return
-
-  # Check layout
-  for k, v in state.tmux_layout.items():
-    if not  v.get('Check'):
-      # Not concerned with the size of this pane
-      continue
-    # Get target
-    target = None
-    if k != 'Current':
-      if k not in state.panes:
-        # Skip missing panes
-        continue
-      else:
-        target = state.panes[k]
-
-    # Check pane size
-    x, y = tmux_get_pane_size(pane_id=target)
-    if v.get('x', False) and v['x'] != x:
-      needs_fixed = True
-    if v.get('y', False) and v['y'] != y:
-      needs_fixed = True
-
-  # Bail?
-  if not needs_fixed:
-    return
-
-  # Update layout
-  for k, v in state.tmux_layout.items():
-    # Get target
-    target = None
-    if k != 'Current':
-      if k not in state.panes:
-        # Skip missing panes
-        continue
-      else:
-        target = state.panes[k]
-
-    # Resize pane
-    tmux_resize_pane(pane_id=target, **v)
-
-
 def generate_horizontal_graph(rates, oneline=False):
   """Generate horizontal graph from rates, returns list."""
   graph = ['', '', '', '']
@@ -733,6 +778,44 @@ def get_graph_step(rate, scale=16):
   return step
 
 
+def get_ram_details():
+  """Get RAM details via dmidecode, returns dict."""
+  cmd = ['sudo', 'dmidecode', '--type', 'memory']
+  manufacturer = 'UNKNOWN'
+  ram_details = {'Total': 0}
+  size = 0
+
+  # Get DMI data
+  result = run_program(cmd, encoding='utf-8', errors='ignore')
+  dmi_data = result.stdout.splitlines()
+
+  # Parse data
+  for line in dmi_data:
+    line = line.strip()
+    if line == 'Memory Device':
+      # Reset vars
+      manufacturer = 'UNKNOWN'
+      size = 0
+    elif line.startswith('Size:'):
+      size = convert_to_bytes(line.replace('Size: ', ''))
+    elif line.startswith('Manufacturer:'):
+      manufacturer = line.replace('Manufacturer: ', '')
+      if size > 0:
+        # Add RAM to list if slot populated
+        ram_str = '{} {}'.format(
+          human_readable_size(size).strip(),
+          manufacturer,
+          )
+        ram_details['Total'] += size
+        if ram_str in ram_details:
+          ram_details[ram_str] += 1
+        else:
+          ram_details[ram_str] = 1
+
+  # Done
+  return ram_details
+
+
 def get_read_rate(s):
   """Get read rate in bytes/s from dd progress output."""
   real_rate = None
@@ -745,6 +828,7 @@ def get_read_rate(s):
 def menu_diags(state, args):
   """Main menu to select and run HW tests."""
   args = [a.lower() for a in args]
+  state.args = args
   checkmark = '*'
   if 'DISPLAY' in global_vars['Env']:
     checkmark = '✓'
@@ -791,7 +875,7 @@ def menu_diags(state, args):
       # If so, verify no other tests are enabled and set quick_mode
       state.quick_mode = True
       for opt in main_options[4:5] + main_options[6:]:
-        state.quick_mode &= not opt['Enabled']
+        state.quick_mode = state.quick_mode and not opt['Enabled']
     else:
       state.quick_mode = False
 
@@ -972,12 +1056,13 @@ def run_hw_tests(state):
   state.init()
   tests_enabled = False
 
-  # Disable osTicket Integration if in quick mode
+  # Disable osTicket Integration if necessary
-  state.ost.disabled |= state.quick_mode
+  if '--quick' in state.args:
+    state.ost.disabled = True
 
   # Build Panes
   update_progress_pane(state)
-  build_outer_panes(state)
+  state.build_outer_panes()
 
   # Show selected tests and create TestObj()s
   print_info('Selected Tests:')
@@ -1020,7 +1105,8 @@ def run_hw_tests(state):
   # Run disk safety checks (if necessary)
   _disk_tests_enabled = False
   for k in TESTS_DISK:
-    _disk_tests_enabled |= state.tests[k]['Enabled']
+    if state.tests[k]['Enabled']:
+      _disk_tests_enabled = True
   if _disk_tests_enabled:
     for disk in state.disks:
       try:
@@ -1062,7 +1148,7 @@ def run_hw_tests(state):
 
     # Rebuild panes
     update_progress_pane(state)
-    build_outer_panes(state)
+    state.build_outer_panes()
 
     # Mark unfinished tests as aborted
     for k, v in state.tests.items():
@@ -1092,8 +1178,8 @@ def run_hw_tests(state):
         # Aborted/Unknown/etc
         all_disks_passed = False
       else:
-        all_disks_passed &= disk.checkbox
+        all_disks_passed = all_disks_passed and disk.checkbox
-        disk_failures |= not disk.checkbox
+        disk_failures = disk_failures or not disk.checkbox
 
     # Update checkbox if necessary
     if disk_failures:
@@ -1109,6 +1195,18 @@ def run_hw_tests(state):
     print_warning('Errors encountered posting results to osTicket.')
     print_standard(' ')
 
+  # Upload for review
+  if ENABLED_UPLOAD_DATA and ask('Upload results for review?'):
+    try_and_print(
+      message='Saving debug reports...',
+      function=save_debug_reports,
+      state=state, global_vars=global_vars)
+    try_and_print(
+      message='Uploading Data...',
+      function=upload_logdir,
+      global_vars=global_vars,
+      reason='Review')
+
   # Done
   sleep(1)
   if state.quick_mode:
@@ -1459,7 +1557,7 @@ def run_mprime_test(state, test):
   # Add temps to report
   test.report.append('{BLUE}Temps{CLEAR}'.format(**COLORS))
   for line in generate_sensor_report(
-      test.sensor_data, 'Idle', 'Max', 'Cooldown', core_only=True):
+      test.sensor_data, 'Idle', 'Max', 'Cooldown', cpu_only=True):
     test.report.append('  {}'.format(line))
 
   # Add abort message(s)
@@ -1579,7 +1677,13 @@ def run_smart_short_test(state, test):
 
   # Start short test
   print_standard('Running self-test...')
-  cmd = ['sudo', 'smartctl', '--test=short', dev.path]
+  cmd = [
+    'sudo',
+    'smartctl',
+    '--tolerance=normal',
+    '--test=short',
+    dev.path,
+    ]
   run_program(cmd, check=False)
 
   # Monitor progress
@@ -1653,7 +1757,8 @@ def show_results(state):
   # CPU tests
   _enabled = False
   for k in TESTS_CPU:
-    _enabled |= state.tests[k]['Enabled']
+    if state.tests[k]['Enabled']:
+      _enabled = True
   if _enabled:
     print_success('CPU:'.format(k))
     show_report(state.cpu.generate_cpu_report(), log_report=True)
@@ -1662,7 +1767,8 @@ def show_results(state):
   # Disk tests
   _enabled = False
   for k in TESTS_DISK:
-    _enabled |= state.tests[k]['Enabled']
+    if state.tests[k]['Enabled']:
+      _enabled = True
   if _enabled:
     print_success('Disk{}:'.format(
       '' if len(state.disks) == 1 else 's'))

.bin/Scripts/functions/info.py

@@ -95,7 +95,7 @@ def get_installed_antivirus():
     out = out.stdout.decode().strip()
     state = out.split('=')[1]
     state = hex(int(state))
-    if str(state)[3:5] != '10':
+    if str(state)[3:5] not in ['10', '11']:
       programs.append('[Disabled] {}'.format(prod))
     else:
       programs.append(prod)
@@ -446,16 +446,19 @@ def show_os_name():
 
 def show_temp_files_size():
   """Show total size of temp files identified by BleachBit."""
-  size = None
+  size_str = None
+  total = 0
   with open(r'{LogDir}\Tools\BleachBit.log'.format(**global_vars), 'r') as f:
     for line in f.readlines():
-      if re.search(r'^disk space to be recovered:', line, re.IGNORECASE):
+      if re.search(r'^Disk space (to be |)recovered:', line, re.IGNORECASE):
         size = re.sub(r'.*: ', '', line.strip())
         size = re.sub(r'(\w)iB$', r' \1b', size)
-  if size is None:
+        total += convert_to_bytes(size)
-    print_warning(size, timestamp=False)
+        size_str = human_readable_size(total, decimals=1)
+  if size_str is None:
+    print_warning('UNKNOWN', timestamp=False)
   else:
-    print_standard(size, timestamp=False)
+    print_standard(size_str, timestamp=False)
 
 
 def show_user_data_summary(indent=8, width=32):

.bin/Scripts/functions/json.py

@@ -4,7 +4,7 @@ import json
 
 from functions.common import *
 
-def get_json_from_command(cmd, ignore_errors=True):
+def get_json_from_command(cmd, check=True, ignore_errors=True):
   """Capture JSON content from cmd output, returns dict.
 
   If the data can't be decoded then either an exception is raised
@@ -17,7 +17,7 @@ def get_json_from_command(cmd, ignore_errors=True):
     errors = 'ignore'
 
   try:
-    result = run_program(cmd, encoding='utf-8', errors=errors)
+    result = run_program(cmd, check=check, encoding='utf-8', errors=errors)
     json_data = json.loads(result.stdout)
   except (subprocess.CalledProcessError, json.decoder.JSONDecodeError):
     if not ignore_errors:

.bin/Scripts/functions/network.py

@@ -15,27 +15,6 @@ REGEX_VALID_IP = re.compile(
   re.IGNORECASE)
 
 
-def connect_to_network():
-  """Connect to network if not already connected."""
-  net_ifs = psutil.net_if_addrs()
-  net_ifs = [i[:2] for i in net_ifs.keys()]
-
-  # Bail if currently connected
-  if is_connected():
-    return
-
-  # WiFi
-  if 'wl' in net_ifs:
-    cmd = [
-      'nmcli', 'dev', 'wifi',
-      'connect', WIFI_SSID,
-      'password', WIFI_PASSWORD]
-    try_and_print(
-      message = 'Connecting to {}...'.format(WIFI_SSID),
-      function = run_program,
-      cmd = cmd)
-
-
 def is_connected():
   """Check for a valid private IP."""
   devs = psutil.net_if_addrs()

.bin/Scripts/functions/osticket.py

@@ -189,11 +189,14 @@ class osTicket():
 
   def generate_report(self, dev, ticket_id, ticket_name):
     """Generate device report for osTicket, returns list."""
-    report = []
+    report = ['']
     results = self.get_device_overall_results(dev)
+    test_station = TEST_STATIONS.get(get_hostname().lower(), '')
 
     # Header
-    report.append('[Report for ticket #{} {}]'.format(ticket_id, ticket_name))
+    if test_station:
+      report[0] += '[Test-Station: {}] '.format(test_station)
+    report[0] += '[Report for ticket #{} {}]'.format(ticket_id, ticket_name)
     if results['Full Diag']:
       report.append(
         '{Dev Type} hardware diagnostic tests: {Status}'.format(**results))
@@ -346,8 +349,15 @@ class osTicket():
       results['Status'] += '*'
 
     # Enable CoreStorage searches
-    results['Core'] = (results['Full Diag'] and
+    results['Core'] = False
-      results['Passed']+results['N/A']+results['OVERRIDE'] == len(test_list))
+    if results['Full Diag']:
+      num_passed = results['Passed'] + results['N/A'] + results['OVERRIDE']
+      if num_passed == len(test_list):
+        # We ran all disk tests and all results were acceptable
+        results['Core'] = True
+      elif results['Failed'] == 1 and dev.tests['I/O Benchmark'].failed:
+        # We ran all disk tests and only I/O Benchmark failed
+        results['Core'] = True
 
     # Done
     return results
@@ -395,28 +405,13 @@ class osTicket():
     self.disconnect()
     return flag_value
 
-  def get_ticket_name(self, ticket_id):
-    """Lookup ticket and return name as str."""
-    name = None
-    sql_cmd =   "SELECT name FROM `{Ticket}`".format(**OSTICKET['Tables'])
-    sql_cmd +=  " WHERE `ticket_id` = {}".format(ticket_id)
-    sql_cmd +=  ";"
-
-    # Lookup name
-    # NOTE: If multiple entries are found it will return the last
-    self.db_cursor.execute(sql_cmd)
-    for s in self.db_cursor:
-      name = s[0]
-
-    # Done
-    return name
-
   def get_ticket_details(self):
     """Get ticket number and name from osTicket DB, returns tuple."""
     ticket_name = None
     ticket_number = None
 
     # Connect
+    print_standard('Connecting to osTicket...')
     while True:
       try:
         self.connect(silent=False)
@@ -434,36 +429,74 @@ class osTicket():
     # Main loop
     while ticket_number is None:
       print_standard(' ')
-      _input = input('Enter ticket number (or leave blank to disable): ')
+      _ticket_id = input('Enter ticket number (or leave blank to disable): ')
-      _input = _input.strip()
+      _ticket_id = _ticket_id.strip()
 
       # No ticket ID entered
-      if re.match(r'^\s*$', _input):
+      if re.match(r'^\s*$', _ticket_id):
         if ask('Disable osTicket integration for this run?'):
           self.disabled = True
           break
 
       # Invalid ID entered
-      if not re.match(r'^(\d+)$', _input):
+      if not re.match(r'^(\d+)$', _ticket_id):
         continue
 
-      # Valid ID entered, lookup name and verify
+      # Valid ID entered, lookup name
       try:
-        _name = self.get_ticket_name(_input)
+        _name = self.get_ticket_field(_ticket_id, 'name')
       except Exception:
         # Ignore and return None below
         break
-      if _name:
+
-        print_standard('You have selected ticket #{} {}'.format(
+      # Verify ticket exists
-          _input, _name))
+      if _name is None:
+        print_error('ERROR: Ticket {} not found.'.format(_ticket_id))
+        continue
+
+      # Lookup subject
+      try:
+        _subject = self.get_ticket_field(_ticket_id, 'subject')
+      except Exception:
+        # Ignore and set to None
+        _subject = None
+
+      # Verify the selected ticket is correct
+      print_standard(
+        'You have selected ticket {BLUE}#{ticket_id}{CLEAR} {name}'.format(
+        ticket_id=_ticket_id,
+        name=_name,
+        **COLORS))
+      print_standard('{CYAN}  {subject}{CLEAR}'.format(
+        subject=_subject,
+        **COLORS))
+      print_standard(' ')
       if ask('Is this correct?'):
         ticket_name = _name
-          ticket_number = _input
+        ticket_number = _ticket_id
 
     # Done
     self.disconnect()
     return (ticket_number, ticket_name)
 
+  def get_ticket_field(self, ticket_id, field):
+    """Lookup ticket and return field as str."""
+    data = None
+    sql_cmd = "SELECT {field} FROM `{Ticket}`".format(
+      field=field,
+      **OSTICKET['Tables'])
+    sql_cmd += " WHERE `ticket_id` = {}".format(ticket_id)
+    sql_cmd += ";"
+
+    # Lookup data
+    # NOTE: If multiple entries are found it will return the last
+    self.db_cursor.execute(sql_cmd)
+    for s in self.db_cursor:
+      data = s[0]
+
+    # Done
+    return data
+
   def post_device_results(self, dev, ticket_id, ticket_name):
     """Generate osTicket friendly report and post as response to ticket."""
     if not dev.tests:
@@ -555,6 +588,13 @@ class osTicket():
 
 
 # Functions
+def get_hostname():
+  """Get hostname, returns str."""
+  cmd = ['hostnamectl', '--static']
+  result = run_program(cmd, check=False, encoding='utf-8', errors='ignore')
+  return result.stdout.strip()
+
+
 def pad_with_dots(s, pad_right=False):
   """Replace space padding with dots, returns str."""
   s = str(s).replace(' ', '..')

.bin/Scripts/functions/sensors.py

@@ -1,4 +1,6 @@
-# Wizard Kit: Functions - Sensors
+'''Wizard Kit: Functions - Sensors'''
+# pylint: disable=no-name-in-module,wildcard-import
+# vim: sts=2 sw=2 ts=2
 
 import json
 import re
@@ -9,7 +11,7 @@ from settings.sensors import *
 
 # Error Classes
 class ThermalLimitReachedError(Exception):
-  pass
+  '''Thermal limit reached error.'''
 
 
 def clear_temps(sensor_data):
@@ -20,28 +22,30 @@ def clear_temps(sensor_data):
         _data['Temps'] = []
 
 
-def fix_sensor_str(s):
+def fix_sensor_str(_s):
   """Cleanup string and return str."""
-  s = re.sub(r'^(\w+)-(\w+)-(\w+)', r'\1 (\2 \3)', s, re.IGNORECASE)
+  _s = re.sub(r'^(\w+)-(\w+)-(\w+)', r'\1 (\2 \3)', _s, re.IGNORECASE)
-  s = s.title()
+  _s = _s.title()
-  s = s.replace('Coretemp', 'CoreTemp')
+  _s = _s.replace('Coretemp', 'CPUTemp')
-  s = s.replace('Acpi', 'ACPI')
+  _s = _s.replace('Acpi', 'ACPI')
-  s = s.replace('ACPItz', 'ACPI TZ')
+  _s = _s.replace('ACPItz', 'ACPI TZ')
-  s = s.replace('Isa ', 'ISA ')
+  _s = _s.replace('Isa ', 'ISA ')
-  s = s.replace('Id ', 'ID ')
+  _s = _s.replace('Pci ', 'PCI ')
-  s = re.sub(r'(\D+)(\d+)', r'\1 \2', s, re.IGNORECASE)
+  _s = _s.replace('Id ', 'ID ')
-  s = s.replace('  ', ' ')
+  _s = re.sub(r'(\D+)(\d+)', r'\1 \2', _s, re.IGNORECASE)
-  return s
+  _s = re.sub(r'^K (\d+)Temp', r'AMD K\1 Temps', _s, re.IGNORECASE)
+  _s = re.sub(r'T(ctl|die)', r'CPU (T\1)', _s, re.IGNORECASE)
+  return _s
 
 
 def generate_sensor_report(
     sensor_data, *temp_labels,
-    colors=True, core_only=False):
+    colors=True, cpu_only=False):
   """Generate report based on temp_labels, returns list if str."""
   report = []
   for _section, _adapters in sorted(sensor_data.items()):
-    # CoreTemps then Other temps
+    # CPU temps then Other temps
-    if core_only and 'Core' not in _section:
+    if cpu_only and 'CPU' not in _section:
       continue
     for _adapter, _sources in sorted(_adapters.items()):
       # Adapter
@@ -56,7 +60,7 @@ def generate_sensor_report(
             ': ' if _label != 'Current' else '',
             get_temp_str(_data.get(_label, '???'), colors=colors))
         report.append(_line)
-      if not core_only:
+      if not cpu_only:
         report.append(' ')
 
   # Handle empty reports (i.e. no sensors detected)
@@ -99,7 +103,7 @@ def get_colored_temp_str(temp):
 
 def get_raw_sensor_data():
   """Read sensor data and return dict."""
-  data = {}
+  json_data = {}
   cmd = ['sensors', '-j']
 
   # Get raw data
@@ -122,8 +126,8 @@ def get_raw_sensor_data():
   try:
     json_data = json.loads('\n'.join(raw_data))
   except json.JSONDecodeError:
-    # Still broken, just set to empty dict
+    # Still broken, just return the empty dict
-    json_data = {}
+    pass
 
   # Done
   return json_data
@@ -132,10 +136,10 @@ def get_raw_sensor_data():
 def get_sensor_data():
   """Parse raw sensor data and return new dict."""
   json_data = get_raw_sensor_data()
-  sensor_data = {'CoreTemps': {}, 'Other': {}}
+  sensor_data = {'CPUTemps': {}, 'Other': {}}
   for _adapter, _sources in json_data.items():
-    if 'coretemp' in _adapter:
+    if is_cpu_adapter(_adapter):
-      _section = 'CoreTemps'
+      _section = 'CPUTemps'
     else:
       _section = 'Other'
     sensor_data[_section][_adapter] = {}
@@ -157,8 +161,8 @@ def get_sensor_data():
             }
 
   # Remove empty sections
-  for k, v in sensor_data.items():
+  for _k, _v in sensor_data.items():
-    v = {k2: v2 for k2, v2 in v.items() if v2}
+    _v = {_k2: _v2 for _k2, _v2 in _v.items() if _v2}
 
   # Done
   return sensor_data
@@ -178,14 +182,20 @@ def get_temp_str(temp, colors=True):
       temp)
 
 
+def is_cpu_adapter(adapter):
+  """Checks if adapter is a known CPU adapter, returns bool."""
+  is_cpu = re.search(r'(core|k\d+)temp', adapter, re.IGNORECASE)
+  return bool(is_cpu)
+
+
 def monitor_sensors(monitor_pane, monitor_file):
   """Continually update sensor data and report to screen."""
   sensor_data = get_sensor_data()
   while True:
     update_sensor_data(sensor_data)
-    with open(monitor_file, 'w') as f:
+    with open(monitor_file, 'w') as _f:
       report = generate_sensor_report(sensor_data, 'Current', 'Max')
-      f.write('\n'.join(report))
+      _f.write('\n'.join(report))
     sleep(1)
     if monitor_pane and not tmux_poll_pane(monitor_pane):
       break
@@ -196,7 +206,7 @@ def save_average_temp(sensor_data, temp_label, seconds=10):
   clear_temps(sensor_data)
 
   # Get temps
-  for i in range(seconds):
+  for _i in range(seconds): # pylint: disable=unused-variable
     update_sensor_data(sensor_data)
     sleep(1)
 
@@ -219,24 +229,15 @@ def update_sensor_data(sensor_data, thermal_limit=None):
           _data['Current'] = _temp
           _data['Max'] = max(_temp, _data['Max'])
           _data['Temps'].append(_temp)
-        except Exception:
+        except Exception: # pylint: disable=broad-except
           # Dumb workound for Dell sensors with changing source names
           pass
 
         # Check if thermal limit reached
-        if thermal_limit and _section == 'CoreTemps':
+        if thermal_limit and _section == 'CPUTemps':
           if max(_data['Current'], _data['Max']) >= thermal_limit:
-            raise ThermalLimitReachedError('CoreTemps reached limit')
+            raise ThermalLimitReachedError('CPU temps reached limit')
-
-
-def join_columns(column1, column2, width=55):
-  return '{:<{}}{}'.format(
-    column1,
-    55+len(column1)-len(REGEX_COLORS.sub('', column1)),
-    column2)
 
 
 if __name__ == '__main__':
   print("This file is not meant to be called directly.")
-
-# vim: sts=2 sw=2 ts=2

.bin/Scripts/functions/setup.py

@@ -1,6 +1,7 @@
 # Wizard Kit: Functions - Setup
 
 from functions.browsers import *
+from functions.json import *
 from functions.update import *
 from settings.setup import *
 from settings.sources import *
@@ -65,9 +66,13 @@ def config_explorer_system():
   write_registry_settings(SETTINGS_EXPLORER_SYSTEM, all_users=True)
 
 
-def config_explorer_user():
+def config_explorer_user(setup_mode='All'):
-  """Configure Windows Explorer for current user."""
+  """Configure Windows Explorer for current user per setup_mode."""
-  write_registry_settings(SETTINGS_EXPLORER_USER, all_users=False)
+  settings_explorer_user = {
+    k: v for k, v in SETTINGS_EXPLORER_USER.items()
+    if setup_mode not in v.get('Invalid modes', [])
+    }
+  write_registry_settings(settings_explorer_user, all_users=False)
 
 
 def config_windows_updates():
@@ -85,6 +90,11 @@ def create_system_restore_point():
   run_program(cmd)
 
 
+def disable_fast_startup():
+  """Disable Fast Startup."""
+  write_registry_settings(SETTINGS_FAST_STARTUP, all_users=True)
+
+
 def disable_windows_telemetry():
   """Disable Windows 10 telemetry settings with O&O ShutUp10."""
   extract_item('ShutUp10', silent=True)
@@ -95,6 +105,12 @@ def disable_windows_telemetry():
   run_program(cmd)
 
 
+def enable_hibernation():
+  """Enable hibernation."""
+  cmd = ['powercfg', '/hibernate', 'on']
+  run_program(cmd)
+
+
 def enable_regback():
   """Enable RegBack."""
   write_registry_settings(SETTINGS_REGBACK, all_users=True)
@@ -123,6 +139,7 @@ def enable_system_restore():
     '/maxsize=8%']
   run_program(cmd)
 
+
 def update_clock():
   """Set Timezone and sync clock."""
   run_program(['tzutil', '/s', WINDOWS_TIME_ZONE], check=False)
@@ -157,6 +174,39 @@ def write_registry_settings(settings, all_users=False):
 
 
 # Installations
+def find_current_software():
+  """Find currently installed software, returns list."""
+  ninite_extras_path = r'{BaseDir}\Installers\Extras'.format(**global_vars)
+  installers = []
+
+  # Browsers
+  scan_for_browsers(skip_ie=True, silent=True)
+  for browser in ('Google Chrome', 'Mozilla Firefox', 'Opera Chromium'):
+    if is_installed(browser):
+      installers.append(
+        r'{}\Web Browsers\{}.exe'.format(ninite_extras_path, browser))
+
+  # TODO: Add more sections
+
+  return installers
+
+def find_missing_software():
+  """Find missing software based on dirs/files present, returns list."""
+  ninite_extras_path = r'{BaseDir}\Installers\Extras'.format(**global_vars)
+  installers = []
+
+  # Browsers
+  scan_for_browsers(skip_ie=True, silent=True)
+  for browser in ('Google Chrome', 'Mozilla Firefox', 'Opera Chromium'):
+    if profile_present(browser):
+      installers.append(
+        r'{}\Web Browsers\{}.exe'.format(ninite_extras_path, browser))
+
+  # TODO: Add more sections
+
+  return installers
+
+
 def install_adobe_reader():
   """Install Adobe Reader."""
   cmd = [
@@ -188,36 +238,26 @@ def install_classicstart_skin():
   shutil.copy(source, dest)
 
 
-def install_eset_nod32_av(scan_pups=True):
+def install_eset_nod32_av(msp=False):
   """Install ESET NOD32 AV with custom config."""
   extract_item('ESETConfigs', silent=True)
   config_file = r'{BinDir}\ESETConfigs\{config_file}.xml'.format(
-    config_file='eset-config' if scan_pups else 'eset-config-no-pup',
+    config_file='eset-config-msp' if msp else 'eset-config',
     **global_vars)
 
-  # Apply user configuration
+  # Registry settings
-  write_registry_settings(SETTINGS_ESET, all_users=False)
+  write_registry_settings(SETTINGS_ESET_SYSTEM, all_users=True)
-
+  write_registry_settings(SETTINGS_ESET_USER, all_users=False)
-  # Download
-  result = try_and_print(message='Downloading Setup...', cs='Done',
-    other_results=OTHER_RESULTS, function=download_generic,
-    out_dir=global_vars['ClientDir'],
-    out_name='eav_nt64.exe',
-    source_url=SOURCE_URLS['ESET NOD32 AV'])
-  installer = r'{ClientDir}\eav_nt64.exe'.format(**global_vars)
-  if not result['CS']:
-    raise GenericError('Failed to download ESET NOD32 AV')
 
   # Install
-  cmd = [installer,
+  cmd = [
+    r'{}\Installers\Extras\Security\ESET NOD32 x64.exe'.format(
+      global_vars['BaseDir']),
     '--silent', '--accepteula', '--msi-property',
     'PRODUCTTYPE=eav', 'PRODUCT_LANG=1033', 'PRODUCT_LANG_CODE=en-US',
-    'ADMINCFG="{}"'.format(config_file)]
+    'ADMINCFG="{}"'.format(config_file),
-  try_and_print(message='Installing ESET NOD32 AV...',
+    ]
-    other_results=OTHER_RESULTS, function=run_program, cmd=cmd)
+  run_program(cmd)
-  
-  # Delete installer
-  remove_item(installer)
 
 def install_firefox_extensions():
   """Install Firefox extensions for all users."""
@@ -240,10 +280,49 @@ def install_firefox_extensions():
   run_program(cmd)
 
 
-def install_ninite_bundle(browsers_only=False, mse=False, libreoffice=False):
+def install_libreoffice(
+    quickstart=True, register_mso_types=True,
+    use_mso_formats=False, vcredist=False):
+  """Install LibreOffice using specified settings."""
+  cmd = [
+    'msiexec', '/passive', '/norestart',
+    '/i', r'{}\Installers\Extras\Office\LibreOffice.msi'.format(
+      global_vars['BaseDir']),
+    'REBOOTYESNO=No',
+    'ISCHECKFORPRODUCTUPDATES=0',
+    'QUICKSTART={}'.format(1 if quickstart else 0),
+    'UI_LANGS=en_US',
+    'VC_REDIST={}'.format(1 if vcredist else 0),
+    ]
+  if register_mso_types:
+    cmd.append('REGISTER_ALL_MSO_TYPES=1')
+  else:
+    cmd.append('REGISTER_NO_MSO_TYPES=1')
+  xcu_dir = r'{APPDATA}\LibreOffice\4\user'.format(**global_vars['Env'])
+  xcu_file = r'{}\registrymodifications.xcu'.format(xcu_dir)
+
+  # Set default save format
+  if use_mso_formats and not os.path.exists(xcu_file):
+    os.makedirs(xcu_dir, exist_ok=True)
+    with open(xcu_file, 'w', encoding='utf-8', newline='\n') as f:
+      f.write(LIBREOFFICE_XCU_DATA)
+
+  # Install LibreOffice
+  run_program(cmd, check=True)
+
+def install_ninite_bundle(
+    # pylint: disable=too-many-arguments,too-many-branches
+    base=True,
+    browsers_only=False,
+    libreoffice=False,
+    missing=False,
+    mse=False,
+    standard=True,
+    ):
   """Run Ninite installer(s), returns list of Popen objects."""
   popen_objects = []
   if browsers_only:
+    # This option is deprecated
     installer_path = r'{BaseDir}\Installers\Extras\Web Browsers'.format(
       **global_vars)
     scan_for_browsers(skip_ie=True, silent=True)
@@ -251,26 +330,65 @@ def install_ninite_bundle(browsers_only=False, mse=False, libreoffice=False):
       if is_installed(browser):
         cmd = r'{}\{}.exe'.format(installer_path, browser)
         popen_objects.append(popen_program(cmd))
-  elif global_vars['OS']['Version'] in ('8', '8.1', '10'):
+
-    # Modern selection
+    # Bail
-    popen_objects.append(
+    return popen_objects
-      popen_program(r'{BaseDir}\Installers\Extras\Bundles\Modern.exe'.format(
+
-        **global_vars)))
+  # Main selections
+  main_selections = []
+  if base:
+    main_selections.append('base')
+  if standard:
+    if global_vars['OS']['Version'] in ('8', '8.1', '10'):
+      main_selections.append('standard')
     else:
-    # Legacy selection
+      main_selections.append('standard7')
+  if main_selections:
+    # Only run if base and/or standard are enabled
+    cmd = r'{}\Installers\Extras\Bundles\{}.exe'.format(
+      global_vars['BaseDir'],
+      '-'.join(main_selections),
+      )
+    popen_objects.append(popen_program([cmd]))
+
+  # Extra selections
+  extra_selections = {}
+  for cmd in find_current_software():
+    extra_selections[cmd] = True
+  if missing:
+    for cmd in find_missing_software():
+      extra_selections[cmd] = True
+
+  # Remove overlapping selections
+  regex = []
+  for n_name, n_group in NINITE_REGEX.items():
+    if n_name in main_selections:
+      regex.extend(n_group)
+  regex = '({})'.format('|'.join(regex))
+  extra_selections = {
+    cmd: True for cmd in extra_selections
+    if not re.search(regex, cmd, re.IGNORECASE)
+    }
+
+  # Start extra selections
+  for cmd in extra_selections:
+    popen_objects.append(popen_program([cmd]))
+
+  # Microsoft Security Essentials
   if mse:
-      cmd = r'{BaseDir}\Installers\Extras\Security'.format(**global_vars)
+    cmd = r'{}\Installers\Extras\Security\{}'.format(
-      cmd += r'\Microsoft Security Essentials.exe'
+      global_vars['BaseDir'],
-      popen_objects.append(popen_program(cmd))
+      'Microsoft Security Essentials.exe',
-    popen_objects.append(
+      )
-      popen_program(r'{BaseDir}\Installers\Extras\Bundles\Legacy.exe'.format(
+    popen_objects.append(popen_program([cmd]))
-        **global_vars)))
 
   # LibreOffice
   if libreoffice:
-    cmd = r'{BaseDir}\Installers\Extras\Office'.format(**global_vars)
+    cmd = r'{}\Installers\Extras\Office\{}'.format(
-    cmd += r'\LibreOffice.exe'
+      global_vars['BaseDir'],
-    popen_objects.append(popen_program(cmd))
+      'LibreOffice.exe',
+      )
+    popen_objects.append(popen_program([cmd]))
 
   # Done
   return popen_objects
@@ -293,6 +411,32 @@ def install_vcredists():
 
 
 # Misc
+def drive_is_rotational(drive):
+  """Check if drive is rotational, returns bool.
+
+  NOTE: This is a quick, naive check with a bias towards rotational."""
+  is_rotational = True
+
+  # Get SMART data
+  extract_item('smartmontools', silent=True)
+  cmd = [
+    global_vars['Tools']['smartctl'],
+    '--info',
+    '--json',
+    drive,
+    ]
+  data = get_json_from_command(cmd, check=False)
+
+  # Check rotation rate
+  try:
+    is_rotational = int(data.get('rotation_rate', '01189998819991197253')) == 0
+  except ValueError:
+    # Ignore and assume rotational
+    pass
+
+  return is_rotational
+
+
 def open_device_manager():
   popen_program(['mmc', 'devmgmt.msc'])
 
@@ -303,6 +447,10 @@ def open_snappy_driver_origin():
   popen_program(cmd, cwd=cwd, pipe=True)
 
 
+def open_speedtest():
+  popen_program(['start', '', 'https://fast.com'], shell=True)
+
+
 def open_windows_activation():
   popen_program(['slui'])
 

.bin/Scripts/functions/sw_diags.py

@@ -6,6 +6,35 @@ from functions.common import *
 from settings.sw_diags import *
 
 
+def check_4k_alignment(show_alert=False):
+  """Check that all partitions are 4K aligned."""
+  aligned = True
+  cmd = ['WMIC', 'partition', 'get', 'StartingOffset']
+  offsets = []
+
+  # Get offsets
+  result = run_program(cmd, encoding='utf-8', errors='ignore', check=False)
+  offsets = result.stdout.splitlines()
+
+  # Check offsets
+  for off in offsets:
+    off = off.strip()
+    if not off.isnumeric():
+      # Skip
+      continue
+
+    try:
+      aligned = aligned and int(off) % 4096 == 0
+    except ValueError:
+      # Ignore, this check is low priority
+      pass
+
+  # Show alert
+  if show_alert:
+    show_alert_box('One or more partitions are not 4K aligned')
+    raise Not4KAlignedError
+
+
 def check_connection():
   """Check if the system is online and optionally abort the script."""
   while True:
@@ -19,6 +48,37 @@ def check_connection():
         abort()
 
 
+def check_os_support_status():
+  """Check if current OS is supported."""
+  msg = ''
+  outdated = False
+  unsupported = False
+
+  # Check OS version/notes
+  os_info = global_vars['OS'].copy()
+  if os_info['Notes'] == 'unsupported':
+    msg = 'The installed version of Windows is no longer supported'
+    unsupported = True
+  elif os_info['Notes'] == 'preview build':
+    msg = 'Preview builds are not officially supported'
+    unsupported = True
+  elif os_info['Version'] == '10' and os_info['Notes'] == 'outdated':
+    msg = 'The installed version of Windows is outdated'
+    outdated = True
+  if 'Preview' not in msg:
+    msg += '\n\nPlease consider upgrading before continuing setup.'
+
+  # Show alert
+  if outdated or unsupported:
+    show_alert_box(msg)
+
+  # Raise exception if necessary
+  if outdated:
+    raise WindowsOutdatedError
+  if unsupported:
+    raise WindowsUnsupportedError
+
+
 def check_secure_boot_status(show_alert=False):
   """Checks UEFI Secure Boot status via PowerShell."""
   boot_mode = get_boot_mode()
@@ -81,33 +141,6 @@ def get_boot_mode():
   return type_str
 
 
-def os_is_unsupported(show_alert=False):
-  """Checks if the current OS is unsupported, returns bool."""
-  msg = ''
-  unsupported = False
-
-  # Check OS version/notes
-  os_info = global_vars['OS'].copy()
-  if os_info['Notes'] == 'unsupported':
-    msg = 'The installed version of Windows is no longer supported'
-    unsupported = True
-  elif os_info['Notes'] == 'preview build':
-    msg = 'Preview builds are not officially supported'
-    unsupported = True
-  elif os_info['Version'] == '10' and os_info['Notes'] == 'outdated':
-    msg = 'The installed version of Windows is outdated'
-    unsupported = True
-  if 'Preview' not in msg:
-    msg += '\n\nPlease consider upgrading before continuing setup.'
-
-  # Show alert
-  if unsupported and show_alert:
-    show_alert_box(msg)
-
-  # Done
-  return unsupported
-
-
 def run_autoruns():
   """Run AutoRuns in the background with VirusTotal checks enabled."""
   extract_item('Autoruns', filter='autoruns*', silent=True)

.bin/Scripts/functions/ufd.py

@@ -0,0 +1,471 @@
+"""Wizard Kit: Functions - UFD"""
+# pylint: disable=broad-except,wildcard-import
+# vim: sts=2 sw=2 ts=2
+
+import os
+import re
+import shutil
+import pathlib
+from collections import OrderedDict
+from functions.common import *
+
+
+def case_insensitive_search(path, item):
+  """Search path for item case insensitively, returns str."""
+  regex_match = '^{}$'.format(item)
+  real_path = ''
+
+  # Quick check first
+  if os.path.exists('{}/{}'.format(path, item)):
+    real_path = '{}{}{}'.format(
+      path,
+      '' if path == '/' else '/',
+      item,
+      )
+
+  # Check all items in dir
+  for entry in os.scandir(path):
+    if re.match(regex_match, entry.name, re.IGNORECASE):
+      real_path = '{}{}{}'.format(
+        path,
+        '' if path == '/' else '/',
+        entry.name,
+        )
+
+  # Done
+  if not real_path:
+    raise FileNotFoundError('{}/{}'.format(path, item))
+
+  return real_path
+
+
+def confirm_selections(args):
+  """Ask tech to confirm selections, twice if necessary."""
+  if not ask('Is the above information correct?'):
+    abort(False)
+  ## Safety check
+  if not args['--update']:
+    print_standard(' ')
+    print_warning('SAFETY CHECK')
+    print_standard(
+      'All data will be DELETED from the disk and partition(s) listed above.')
+    print_standard(
+      'This is irreversible and will lead to {RED}DATA LOSS.{CLEAR}'.format(
+        **COLORS))
+    if not ask('Asking again to confirm, is this correct?'):
+      abort(False)
+
+  print_standard(' ')
+
+
+def copy_source(source, items, overwrite=False):
+  """Copy source items to /mnt/UFD."""
+  is_image = source.is_file()
+
+  # Mount source if necessary
+  if is_image:
+    mount(source, '/mnt/Source')
+
+  # Copy items
+  for i_source, i_dest in items:
+    i_source = '{}{}'.format(
+      '/mnt/Source' if is_image else source,
+      i_source,
+      )
+    i_dest = '/mnt/UFD{}'.format(i_dest)
+    try:
+      recursive_copy(i_source, i_dest, overwrite=overwrite)
+    except FileNotFoundError:
+      # Going to assume (hope) that this is fine
+      pass
+
+  # Unmount source if necessary
+  if is_image:
+    unmount('/mnt/Source')
+
+
+def find_first_partition(dev_path):
+  """Find path to first partition of dev, returns str."""
+  cmd = [
+    'lsblk',
+    '--list',
+    '--noheadings',
+    '--output', 'name',
+    '--paths',
+    dev_path,
+    ]
+  result = run_program(cmd, encoding='utf-8', errors='ignore')
+  part_path = result.stdout.splitlines()[-1].strip()
+
+  return part_path
+
+
+def find_path(path):
+  """Find path case-insensitively, returns pathlib.Path obj."""
+  path_obj = pathlib.Path(path).resolve()
+
+  # Quick check first
+  if path_obj.exists():
+    return path_obj
+
+  # Fix case
+  parts = path_obj.relative_to('/').parts
+  real_path = '/'
+  for part in parts:
+    try:
+      real_path = case_insensitive_search(real_path, part)
+    except NotADirectoryError:
+      # Reclassify error
+      raise FileNotFoundError(path)
+
+  # Raise error if path doesn't exist
+  path_obj = pathlib.Path(real_path)
+  if not path_obj.exists():
+    raise FileNotFoundError(path_obj)
+
+  # Done
+  return path_obj
+
+
+def get_user_home(user):
+  """Get path to user's home dir, returns str."""
+  home_dir = None
+  cmd = ['getent', 'passwd', user]
+  result = run_program(cmd, encoding='utf-8', errors='ignore', check=False)
+  try:
+    home_dir = result.stdout.split(':')[5]
+  except Exception:
+    # Just use HOME from ENV (or '/root' if that fails)
+    home_dir = os.environ.get('HOME', '/root')
+
+  return home_dir
+
+
+def get_user_name():
+  """Get real user name, returns str."""
+  user = None
+  if 'SUDO_USER' in os.environ:
+    user = os.environ.get('SUDO_USER', 'Unknown')
+  else:
+    user = os.environ.get('USER', 'Unknown')
+
+  return user
+
+
+def hide_items(ufd_dev, items):
+  """Set FAT32 hidden flag for items."""
+  # pylint: disable=invalid-name
+  with open('/root/.mtoolsrc', 'w') as f:
+    f.write('drive U: file="{}"\n'.format(
+      find_first_partition(ufd_dev)))
+    f.write('mtools_skip_check=1\n')
+
+  # Hide items
+  for item in items:
+    cmd = ['yes | mattrib +h "U:/{}"'.format(item)]
+    run_program(cmd, check=False, shell=True)
+
+
+def install_syslinux_to_dev(ufd_dev, use_mbr):
+  """Install Syslinux to UFD (dev)."""
+  cmd = [
+    'dd',
+    'bs=440',
+    'count=1',
+    'if=/usr/lib/syslinux/bios/{}.bin'.format(
+      'mbr' if use_mbr else 'gptmbr',
+      ),
+    'of={}'.format(ufd_dev),
+    ]
+  run_program(cmd)
+
+
+def install_syslinux_to_partition(partition):
+  """Install Syslinux to UFD (partition)."""
+  cmd = [
+    'syslinux',
+    '--install',
+    '--directory',
+    '/arch/boot/syslinux/',
+    partition,
+    ]
+  run_program(cmd)
+
+
+def is_valid_path(path_obj, path_type):
+  """Verify path_obj is valid by type, returns bool."""
+  valid_path = False
+  if path_type == 'DIR':
+    valid_path = path_obj.is_dir()
+  elif path_type == 'KIT':
+    valid_path = path_obj.is_dir() and path_obj.joinpath('.bin').exists()
+  elif path_type == 'IMG':
+    valid_path = path_obj.is_file() and path_obj.suffix.lower() == '.img'
+  elif path_type == 'ISO':
+    valid_path = path_obj.is_file() and path_obj.suffix.lower() == '.iso'
+  elif path_type == 'UFD':
+    valid_path = path_obj.is_block_device()
+
+  return valid_path
+
+
+def mount(mount_source, mount_point, read_write=False):
+  """Mount mount_source on mount_point."""
+  os.makedirs(mount_point, exist_ok=True)
+  cmd = [
+    'mount',
+    mount_source,
+    mount_point,
+    '-o',
+    'rw' if read_write else 'ro',
+    ]
+  run_program(cmd)
+
+
+def prep_device(dev_path, label, use_mbr=False, indent=2):
+  """Format device in preparation for applying the WizardKit components
+
+  This is done is four steps:
+  1. Zero-out first 64MB (this deletes the partition table and/or bootloader)
+  2. Create a new partition table (GPT by default, optionally MBR)
+  3. Set boot flag
+  4. Format partition (FAT32, 4K aligned)
+  """
+  # Zero-out first 64MB
+  cmd = 'dd bs=4M count=16 if=/dev/zero of={}'.format(dev_path).split()
+  try_and_print(
+    indent=indent,
+    message='Zeroing first 64MB...',
+    function=run_program,
+    cmd=cmd,
+    )
+
+  # Create partition table
+  cmd = 'parted {} --script -- mklabel {} mkpart primary fat32 4MiB {}'.format(
+    dev_path,
+    'msdos' if use_mbr else 'gpt',
+    '-1s' if use_mbr else '-4MiB',
+    ).split()
+  try_and_print(
+    indent=indent,
+    message='Creating partition table...',
+    function=run_program,
+    cmd=cmd,
+    )
+
+  # Set boot flag
+  cmd = 'parted {} set 1 {} on'.format(
+    dev_path,
+    'boot' if use_mbr else 'legacy_boot',
+    ).split()
+  try_and_print(
+    indent=indent,
+    message='Setting boot flag...',
+    function=run_program,
+    cmd=cmd,
+    )
+
+  # Format partition
+  cmd = [
+    'mkfs.vfat', '-F', '32',
+    '-n', label,
+    find_first_partition(dev_path),
+    ]
+  try_and_print(
+    indent=indent,
+    message='Formatting partition...',
+    function=run_program,
+    cmd=cmd,
+    )
+
+
+def recursive_copy(source, dest, overwrite=False):
+  """Copy source to dest recursively.
+
+  NOTE: This uses rsync style source/dest syntax.
+  If the source has a trailing slash then it's contents are copied,
+  otherwise the source itself is copied.
+
+  Examples assuming "ExDir/ExFile.txt" exists:
+  recursive_copy("ExDir", "Dest/") results in "Dest/ExDir/ExFile.txt"
+  recursive_copy("ExDir/", "Dest/") results in "Dest/ExFile.txt"
+
+  NOTE 2: dest does not use find_path because it might not exist.
+  """
+  copy_contents = source.endswith('/')
+  source = find_path(source)
+  dest = pathlib.Path(dest).resolve().joinpath(source.name)
+  os.makedirs(dest.parent, exist_ok=True)
+
+  if source.is_dir():
+    if copy_contents:
+      # Trailing slash syntax
+      for item in os.scandir(source):
+        recursive_copy(item.path, dest.parent, overwrite=overwrite)
+    elif not dest.exists():
+      # No conflict, copying whole tree (no merging needed)
+      shutil.copytree(source, dest)
+    elif not dest.is_dir():
+      # Refusing to replace file with dir
+      raise FileExistsError('Refusing to replace file: {}'.format(dest))
+    else:
+      # Dest exists and is a dir, merge dirs
+      for item in os.scandir(source):
+        recursive_copy(item.path, dest, overwrite=overwrite)
+  elif source.is_file():
+    if not dest.exists():
+      # No conflict, copying file
+      shutil.copy2(source, dest)
+    elif not dest.is_file():
+      # Refusing to replace dir with file
+      raise FileExistsError('Refusing to replace dir: {}'.format(dest))
+    elif overwrite:
+      # Dest file exists, deleting and replacing file
+      os.remove(dest)
+      shutil.copy2(source, dest)
+    else:
+      # Refusing to delete file when overwrite=False
+      raise FileExistsError('Refusing to delete file: {}'.format(dest))
+
+
+def remove_arch():
+  """Remove arch dir from UFD.
+
+  This ensures a clean installation to the UFD and resets the boot files
+  """
+  shutil.rmtree(find_path('/mnt/UFD/arch'))
+
+
+def running_as_root():
+  """Check if running with effective UID of 0, returns bool."""
+  return os.geteuid() == 0
+
+
+def show_selections(args, sources, ufd_dev, ufd_sources):
+  """Show selections including non-specified options."""
+
+  # Sources
+  print_info('Sources')
+  for label in ufd_sources.keys():
+    if label in sources:
+      print_standard('  {label:<18} {path}'.format(
+        label=label+':',
+        path=sources[label],
+        ))
+    else:
+      print_standard('  {label:<18} {YELLOW}Not Specified{CLEAR}'.format(
+        label=label+':',
+        **COLORS,
+        ))
+  print_standard(' ')
+
+  # Destination
+  print_info('Destination')
+  cmd = [
+    'lsblk', '--nodeps', '--noheadings', '--paths',
+    '--output', 'NAME,FSTYPE,TRAN,SIZE,VENDOR,MODEL,SERIAL',
+    ufd_dev,
+    ]
+  result = run_program(cmd, check=False, encoding='utf-8', errors='ignore')
+  print_standard(result.stdout.strip())
+  cmd = [
+    'lsblk', '--noheadings', '--paths',
+    '--output', 'NAME,SIZE,FSTYPE,LABEL,MOUNTPOINT',
+    ufd_dev,
+    ]
+  result = run_program(cmd, check=False, encoding='utf-8', errors='ignore')
+  for line in result.stdout.splitlines()[1:]:
+    print_standard(line)
+
+  # Notes
+  if args['--update']:
+    print_warning('Updating kit in-place')
+  elif args['--use-mbr']:
+    print_warning('Formatting using legacy MBR')
+  print_standard(' ')
+
+
+def unmount(mount_point):
+  """Unmount mount_point."""
+  cmd = ['umount', mount_point]
+  run_program(cmd)
+
+
+def update_boot_entries(boot_entries, boot_files, iso_label, ufd_label):
+  """Update boot files for UFD usage"""
+  configs = []
+
+  # Find config files
+  for c_path, c_ext in boot_files.items():
+    c_path = find_path('/mnt/UFD{}'.format(c_path))
+    for item in os.scandir(c_path):
+      if item.name.lower().endswith(c_ext.lower()):
+        configs.append(item.path)
+
+  # Update Linux labels
+  cmd = [
+    'sed',
+    '--in-place',
+    '--regexp-extended',
+    's/(eSysRescueLiveCD|{})/{}/'.format(iso_label, ufd_label),
+    *configs,
+    ]
+  run_program(cmd)
+
+  # Uncomment extra entries if present
+  for b_path, b_comment in boot_entries.items():
+    try:
+      find_path('/mnt/UFD{}'.format(b_path))
+    except (FileNotFoundError, NotADirectoryError):
+      # Entry not found, continue to next entry
+      continue
+
+    # Entry found, update config files
+    cmd = [
+      'sed',
+      '--in-place',
+      's/#{}#//'.format(b_comment),
+      *configs,
+      ]
+    run_program(cmd, check=False)
+
+
+def verify_sources(args, ufd_sources):
+  """Check all sources and abort if necessary, returns dict."""
+  sources = OrderedDict()
+
+  for label, data in ufd_sources.items():
+    s_path = args[data['Arg']]
+    if s_path:
+      try:
+        s_path_obj = find_path(s_path)
+      except FileNotFoundError:
+        print_error('ERROR: {} not found: {}'.format(label, s_path))
+        abort(False)
+      if not is_valid_path(s_path_obj, data['Type']):
+        print_error('ERROR: Invalid {} source: {}'.format(label, s_path))
+        abort(False)
+      sources[label] = s_path_obj
+
+  return sources
+
+
+def verify_ufd(dev_path):
+  """Check that dev_path is a valid UFD, returns pathlib.Path obj."""
+  ufd_dev = None
+
+  try:
+    ufd_dev = find_path(dev_path)
+  except FileNotFoundError:
+    print_error('ERROR: UFD device not found: {}'.format(dev_path))
+    abort(False)
+
+  if not is_valid_path(ufd_dev, 'UFD'):
+    print_error('ERROR: Invalid UFD device: {}'.format(ufd_dev))
+    abort(False)
+
+  return ufd_dev
+
+
+if __name__ == '__main__':
+  print("This file is not meant to be called directly.")

.bin/Scripts/functions/update.py

@@ -702,6 +702,39 @@ def update_eset_config():
   if os.path.exists(include_path):
     shutil.copytree(include_path, dest)
 
+
+def update_eset_nod32():
+  # Prep
+  dest = r'{}\Installers\Extras\Security'.format(
+    global_vars['BaseDir'])
+
+  # Remove existing installer
+  try:
+    os.remove(r'{}\ESET NOD32 x64.exe'.format(dest))
+  except FileNotFoundError:
+    pass
+
+  # Download
+  download_generic(
+    dest, 'ESET NOD32 x64.exe', SOURCE_URLS['ESET NOD32 AV'])
+
+
+def update_libreoffice():
+  # Prep
+  dest = r'{}\Installers\Extras\Office'.format(
+    global_vars['BaseDir'])
+
+  # Remove existing installer
+  try:
+    os.remove(r'{}\LibreOffice.msi'.format(dest))
+  except FileNotFoundError:
+    pass
+
+  # Download
+  download_generic(
+    dest, 'LibreOffice.msi', SOURCE_URLS['LibreOffice'])
+
+
 def update_macs_fan_control():
   # Prep
   dest = r'{}\Installers'.format(
@@ -935,6 +968,42 @@ def update_shutup10():
     'OOSU10.exe',
     SOURCE_URLS['ShutUp10'])
 
+
+def update_smartmontools():
+  # Stop running processes
+  for process in ['smartctl.exe', 'smartctl64.exe']:
+    kill_process(process)
+
+  # Remove existing folders
+  remove_from_kit('smartmontools')
+
+  # Download installer
+  download_to_temp('smartmontools.exe', SOURCE_URLS['smartmontools'])
+  _installer = r'{}\smartmontools.exe'.format(global_vars['TmpDir'])
+
+  # Extract 64-bit
+  extract_temp_to_cbin(
+    _installer,
+    'smartmontools',
+    mode='e',
+    sz_args=[r'bin64\smartctl.exe'],
+    )
+  shutil.move(
+    r'{}\smartmontools\smartctl.exe'.format(global_vars['CBinDir']),
+    r'{}\smartmontools\smartctl64.exe'.format(global_vars['CBinDir']))
+
+  # Extract 32-bit
+  extract_temp_to_cbin(
+    _installer,
+    'smartmontools',
+    mode='e',
+    sz_args=[r'bin\drivedb.h', r'bin\smartctl.exe'],
+    )
+
+  # Cleanup
+  remove_item(_installer)
+
+
 def update_wiztree():
   # Stop running processes
   for process in ['WizTree.exe', 'WizTree64.exe']:

.bin/Scripts/hw-diags-audio

@@ -34,8 +34,8 @@ if __name__ == '__main__':
     #print_standard('\nDone.')
     #pause("Press Enter to exit...")
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/hw-diags-menu

@@ -22,9 +22,8 @@ if __name__ == '__main__':
     print_standard(' ')
     sleep(1)
     pause('Press Enter to exit...')
-  except SystemExit:
+  except SystemExit as sys_exit:
-    # Normal exit
+    exit_script(sys_exit.code)
-    pass
   except:
     # Cleanup
     tmux_kill_all_panes()

.bin/Scripts/hw-diags-network

@@ -40,8 +40,8 @@ if __name__ == '__main__':
     print_standard('\nDone.')
     #pause("Press Enter to exit...")
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/hw-drive-info

@@ -3,9 +3,9 @@
 
 BLUE='\033[34m'
 CLEAR='\033[0m'
+IFS=$'\n'
 
 # List devices
-IFS=$'\n'
 for line in $(lsblk -do NAME,TRAN,SIZE,VENDOR,MODEL,SERIAL); do
     if [[ "${line:0:4}" == "NAME" ]]; then
         echo -e "${BLUE}${line}${CLEAR}"
@@ -15,6 +15,18 @@ for line in $(lsblk -do NAME,TRAN,SIZE,VENDOR,MODEL,SERIAL); do
 done
 echo ""
 
+# List loopback devices
+if [[ "$(losetup -l | wc -l)" > 0 ]]; then
+    for line in $(losetup -lO NAME,PARTSCAN,RO,BACK-FILE); do
+        if [[ "${line:0:4}" == "NAME" ]]; then
+            echo -e "${BLUE}${line}${CLEAR}"
+        else
+            echo "${line}" | sed -r 's#/dev/(loop[0-9]+)#\1     #'
+        fi
+    done
+    echo ""
+fi
+
 # List partitions
 for line in $(lsblk -o NAME,SIZE,FSTYPE,LABEL,MOUNTPOINT); do
     if [[ "${line:0:4}" == "NAME" ]]; then

.bin/Scripts/hw-sensors-monitor

@@ -28,8 +28,8 @@ if __name__ == '__main__':
       run_program(cmd, check=False)
     monitor_sensors(monitor_pane, monitor_file)
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/install_eset_nod32_av.py

@@ -16,12 +16,12 @@ if __name__ == '__main__':
     stay_awake()
     clear_screen()
     print_info('{}: Install ESET NOD32 AV\n'.format(KIT_NAME_FULL))
-    scan_pups = ask('Enable PUP scans in ESET?')
+    msp = ask('Use MSP settings (ITS/VIP)?')
-    install_eset_nod32_av(scan_pups)
+    install_eset_nod32_av(msp=msp)
     print_standard('\nDone.')
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/install_sw_bundle.py

@@ -64,8 +64,8 @@ if __name__ == '__main__':
         other_results=other_results)
     print_standard('\nDone.')
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/install_vcredists.py

@@ -27,8 +27,8 @@ if __name__ == '__main__':
 
     print_standard('\nDone.')
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/mount-all-volumes

@@ -30,8 +30,8 @@ if __name__ == '__main__':
       pause("Press Enter to exit...")
       popen_program(['nohup', 'thunar', '/media'], pipe=True)
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/mount-backup-shares

@@ -16,9 +16,6 @@ if __name__ == '__main__':
     # Prep
     clear_screen()
 
-    # Connect
-    connect_to_network()
-
     # Mount
     if is_connected():
       mount_backup_shares(read_write=True)
@@ -30,8 +27,8 @@ if __name__ == '__main__':
     print_standard('\nDone.')
     #pause("Press Enter to exit...")
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/msword-search

@@ -76,8 +76,8 @@ if __name__ == '__main__':
     print_standard('\nDone.')
     #pause("Press Enter to exit...")
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/network_stability_test.py

@@ -38,7 +38,7 @@ if __name__ == '__main__':
         print_standard('\nDone.')
         pause('Press Enter to exit...')
         exit_script()
-    except SystemExit:
+    except SystemExit as sys_exit:
-        pass
+      exit_script(sys_exit.code)
     except:
         major_exception()

.bin/Scripts/new_system_setup.py

@@ -1,199 +0,0 @@
-# Wizard Kit: New system setup
-
-import os
-import sys
-
-# Init
-os.chdir(os.path.dirname(os.path.realpath(__file__)))
-sys.path.append(os.getcwd())
-from functions.activation import *
-from functions.browsers import *
-from functions.cleanup import *
-from functions.info import *
-from functions.product_keys import *
-from functions.setup import *
-from functions.sw_diags import *
-init_global_vars()
-os.system('title {}: New System Setup'.format(KIT_NAME_FULL))
-set_log_file('New System Setup.log')
-
-if __name__ == '__main__':
-  other_results = {
-    'Error': {
-      'BIOSKeyNotFoundError':     'BIOS key not found',
-      'CalledProcessError':       'Unknown Error',
-      'FileNotFoundError':        'File not found',
-      'GenericError':             'Unknown Error',
-      'SecureBootDisabledError':  'Disabled',
-    },
-    'Warning': {
-      'GenericRepair':            'Repaired',
-      'NoProfilesError':          'No profiles found',
-      'NotInstalledError':        'Not installed',
-      'OSInstalledLegacyError':   'OS installed Legacy',
-      'SecureBootNotAvailError':  'Not available',
-      'SecureBootUnknownError':   'Unknown',
-      'UnsupportedOSError':       'Unsupported OS',
-    }}
-  try:
-    stay_awake()
-    clear_screen()
-
-    # Check installed OS
-    if os_is_unsupported(show_alert=True):
-      print_warning('OS version not supported by this script')
-      if not ask('Continue anyway? (NOT RECOMMENDED)'):
-        abort()
-
-    # Select AV software
-    # NOTE: Truth tuple is (ESET, ESET_PUPS, MSE)
-    av_options = [
-      {'Name': 'ESET NOD32',
-        'Truths': (True, True, False),},
-      {'Name': 'ESET NOD32 (no PUP/PUW scans)',
-        'Truths': (True, False, False),},
-      {'Name': 'Microsoft Security Essentials',
-        'Disabled': global_vars['OS']['Version'] not in ['7'],
-        'Truths': (False, False, True),},
-      ]
-    actions = [
-      {'Name': 'None', 'Letter': 'N'},
-      {'Name': 'Quit', 'Letter': 'Q'},
-      ]
-    selection = menu_select(
-      'Please select an option to install',
-      main_entries=av_options,
-      action_entries=actions)
-    if selection.isnumeric():
-      index = int(selection) - 1
-      answer_eset, answer_pups, answer_mse = av_options[index]['Truths']
-    elif selection == 'Q':
-      abort()
-    else:
-      answer_eset = False
-      answer_pups = False
-      answer_mse = False
-
-    # Install LibreOffice?
-    answer_libreoffice = ask('Install LibreOffice?')
-
-    # Install software
-    print_info('Installing Programs')
-    install_vcredists()
-    if answer_eset:
-      install_eset_nod32_av(scan_pups=answer_pups)
-    result = try_and_print(
-      message='Ninite bundle...',
-      function=install_ninite_bundle, cs='Started',
-      mse=answer_mse, libreoffice=answer_libreoffice,
-      other_results=other_results)
-    try:
-      for proc in result['Out']:
-        # Wait for all processes to finish
-        print_standard('Waiting for installations to finish...')
-        proc.wait()
-    except KeyboardInterrupt:
-      pass
-
-    # Scan for supported browsers
-    print_info('Scanning for browsers')
-    scan_for_browsers(skip_ie=True)
-
-    # Install extensions
-    print_info('Installing Extensions')
-    try_and_print(message='Classic Shell skin...',
-      function=install_classicstart_skin,
-      other_results=other_results)
-    try_and_print(message='Google Chrome extensions...',
-      function=install_chrome_extensions)
-    try_and_print(message='Mozilla Firefox extensions...',
-      function=install_firefox_extensions,
-      other_results=other_results)
-
-    # Configure software
-    print_info('Configuring programs')
-    print_standard('    (if stuck press CTRL+c to cancel this step).')
-    try:
-      install_adblock()
-    except KeyboardInterrupt:
-      print_warning('Configuration interrupted.')
-      print_standard('Please confirm all browsers have adblock installed.')
-      if not ask('Continue to next step?'):
-        abort()
-    if global_vars['OS']['Version'] == '10':
-      try_and_print(message='ClassicStart...',
-        function=config_classicstart, cs='Done')
-      try_and_print(message='Explorer (user)...',
-        function=config_explorer_user, cs='Done')
-
-    # Configure system
-    print_info('Configuring system')
-    if global_vars['OS']['Version'] == '10':
-      try_and_print(message='Explorer (system)...',
-        function=config_explorer_system, cs='Done')
-      try_and_print(message='Disabling telemetry...',
-        function=disable_windows_telemetry, cs='Done')
-      try_and_print(message='Enabling RegBack...',
-        function=enable_regback, cs='Done')
-      try_and_print(message='Windows Updates...',
-        function=config_windows_updates, cs='Done')
-    try_and_print(message='Enabling System Restore...',
-      function=enable_system_restore, cs='Done')
-    try_and_print(message='Updating Clock...',
-      function=update_clock, cs='Done')
-
-    # Restart Explorer
-    try_and_print(message='Restarting Explorer...',
-      function=restart_explorer, cs='Done')
-
-    # Summary
-    print_info('Summary')
-    try_and_print(message='Operating System:',
-      function=show_os_name, ns='Unknown', silent_function=False)
-    try_and_print(message='Activation:',
-      function=show_os_activation, ns='Unknown', silent_function=False)
-    if (not windows_is_activated()
-      and global_vars['OS']['Version'] in ('8', '8.1', '10')):
-      try_and_print(message='BIOS Activation:',
-        function=activate_with_bios,
-        other_results=other_results)
-    try_and_print(message='Secure Boot Status:',
-      function=check_secure_boot_status, other_results=other_results)
-    try_and_print(message='Installed RAM:',
-      function=show_installed_ram, ns='Unknown', silent_function=False)
-    show_free_space()
-    try_and_print(message='Installed Antivirus:',
-      function=get_installed_antivirus, ns='Unknown',
-      other_results=other_results, print_return=True)
-
-    # Play audio, show devices, open Windows updates, and open Activation
-    try_and_print(message='Opening Device Manager...',
-      function=open_device_manager, cs='Started')
-    try_and_print(message='Opening HWiNFO (Sensors)...',
-      function=run_hwinfo_sensors, cs='Started', other_results=other_results)
-    try_and_print(message='Opening SDI Origin...',
-      function=open_snappy_driver_origin, cs='Started')
-    try_and_print(message='Opening Windows Updates...',
-      function=open_windows_updates, cs='Started')
-    if not windows_is_activated():
-      try_and_print(message='Opening Windows Activation...',
-        function=open_windows_activation, cs='Started')
-    sleep(3)
-    try_and_print(message='Running XMPlay...',
-      function=run_xmplay, cs='Started', other_results=other_results)
-    try:
-      check_secure_boot_status(show_alert=True)
-    except:
-      # Only trying to open alert message boxes
-      pass
-
-    # Done
-    print_standard('\nDone.')
-    pause('Press Enter to exit...')
-    exit_script()
-  except SystemExit:
-    pass
-  except:
-    major_exception()
-
-# vim: sts=2 sw=2 ts=2

.bin/Scripts/post_d7.py

@@ -1,55 +0,0 @@
-# Wizard Kit: Post-d7II items
-
-import os
-import sys
-
-# Init
-os.chdir(os.path.dirname(os.path.realpath(__file__)))
-sys.path.append(os.getcwd())
-from functions.browsers import *
-from functions.cleanup import *
-from functions.setup import *
-init_global_vars()
-os.system('title {}: Post-d7II Work'.format(KIT_NAME_FULL))
-set_log_file('Post-d7II Work.log')
-
-if __name__ == '__main__':
-  try:
-    stay_awake()
-    clear_screen()
-    print_info('{}: Post-d7II Work\n'.format(KIT_NAME_FULL))
-    other_results = {
-      'Warning': {
-        'NotInstalledError': 'Not installed',
-        'NoProfilesError': 'No profiles found',
-      }}
-
-    # Scan for Firefox browsers
-    print_info('Scanning for Firefox browsers')
-    scan_for_browsers(just_firefox=True)
-
-    # Install uBlock Origin
-    print_info('Installing uBlock Origin')
-    install_adblock(just_firefox=True)
-
-    # Cleanup
-    print_info('Cleanup')
-    try_and_print(message='d7II...',
-      function=cleanup_d7ii, cs='Done')
-    try_and_print(message='{}...'.format(KIT_NAME_FULL),
-      function=delete_empty_folders, cs='Done',
-      folder_path=global_vars['ClientDir'])
-
-    # Run speedtest
-    popen_program(['start', '', 'https://fast.com'], shell=True)
-
-    # Done
-    print_standard('\nDone.')
-    pause('Press Enter to exit...')
-    exit_script()
-  except SystemExit:
-    pass
-  except:
-    major_exception()
-
-# vim: sts=2 sw=2 ts=2

.bin/Scripts/reset_browsers.py

@@ -47,7 +47,7 @@ if __name__ == '__main__':
 
         # Done
         exit_script()
-    except SystemExit:
+    except SystemExit as sys_exit:
-        pass
+      exit_script(sys_exit.code)
     except:
         major_exception()

.bin/Scripts/safemode_enter.py

@@ -31,8 +31,8 @@ if __name__ == '__main__':
     pause('Press Enter to reboot...')
     reboot()
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/safemode_exit.py

@@ -31,8 +31,8 @@ if __name__ == '__main__':
     pause('Press Enter to reboot...')
     reboot()
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/settings/cleanup.py

@@ -0,0 +1,66 @@
+# Wizard Kit: Settings - Cleanup
+
+import re
+import psutil
+try:
+  import winreg
+except ModuleNotFoundError:
+  if psutil.WINDOWS:
+    raise
+
+# d7II
+D7_HKCR_CLEANUP = {
+  r'batfile\shell\!!RunWithParms': {'Recurse': True},
+  r'batfile\shell\{0001B4FD-9EA3-4D90-A79E-FD14BA3AB01D}': {'Recurse': True},
+  r'cmdfile\shell\!!RunWithParms': {'Recurse': True},
+  r'cmdfile\shell\{0001B4FD-9EA3-4D90-A79E-FD14BA3AB01D}': {'Recurse': True},
+  r'exefile\shell\!!RunWithParms': {'Recurse': True},
+  r'exefile\shell\ResourceHacker': {'Recurse': True},
+  r'regfile\shell\!!RunWithParms': {'Recurse': True},
+  r'regfile\shell\{0001B4FD-9EA3-4D90-A79E-FD14BA3AB01D}': {'Recurse': True},
+  }
+D7_HKCU_CLEANUP = {
+  r'Software\Malwarebytes': {'Recurse': False},
+  }
+D7_HKLM_CLEANUP = {
+  r'Software\Emsisoft': {'Recurse': False},
+  }
+
+# Regex
+DESKTOP_ITEMS = re.compile(
+  r'^(JRT|RKill|sc-cleaner|Transfer_Log)',
+  re.IGNORECASE,
+  )
+
+# Registry
+HKU = winreg.HKEY_USERS
+HKCR = winreg.HKEY_CLASSES_ROOT
+HKCU = winreg.HKEY_CURRENT_USER
+HKLM = winreg.HKEY_LOCAL_MACHINE
+UAC_DEFAULTS_WIN7 = {
+  r'Software\Microsoft\Windows\CurrentVersion\Policies\System': {
+    'DWORD Items': {
+      'ConsentPromptBehaviorAdmin': 5,
+      'EnableLUA': 1,
+      'PromptOnSecureDesktop': 1,
+      },
+    },
+  }
+UAC_DEFAULTS_WIN10 = {
+  r'Software\Microsoft\Windows\CurrentVersion\Policies\System': {
+    'DWORD Items': {
+      'ConsentPromptBehaviorAdmin': 5,
+      'ConsentPromptBehaviorUser': 3,
+      'EnableInstallerDetection': 1,
+      'EnableLUA': 1,
+      'EnableVirtualization': 1,
+      'PromptOnSecureDesktop': 1,
+      },
+    },
+  }
+
+
+if __name__ == '__main__':
+  print("This file is not meant to be called directly.")
+
+# vim: sts=2 sw=2 ts=2

.bin/Scripts/settings/ddrescue.py

@@ -5,7 +5,9 @@ import re
 from collections import OrderedDict
 
 # General
+MAP_DIR = '/Backups/Anaconda'
 RECOMMENDED_FSTYPES = ['ext3', 'ext4', 'xfs']
+RECOMMENDED_MAP_FSTYPES = ['cifs', 'ext2', 'ext3', 'ext4', 'vfat', 'xfs']
 USAGE = """  {script_name} clone [source [destination]]
   {script_name} image [source [destination]]
   (e.g. {script_name} clone /dev/sda /dev/sdb)
@@ -36,6 +38,12 @@ DDRESCUE_SETTINGS = {
   '-vvvv':              {'Enabled': True,                 'Hidden': True, },
   }
 ETOC_REFRESH_RATE = 30 # in seconds
+REGEX_DDRESCUE_LOG = re.compile(
+  r'^\s*(?P<key>\S+):\s+'
+  r'(?P<size>\d+)\s+'
+  r'(?P<unit>[PTGMKB])i?B?',
+  re.IGNORECASE,
+  )
 REGEX_REMAINING_TIME = re.compile(
   r'remaining time:'
   r'\s*((?P<days>\d+)d)?'

.bin/Scripts/settings/launchers.py

@@ -2,46 +2,17 @@
 
 LAUNCHERS = {
   r'(Root)': {
-    'Activate Windows': {
-      'L_TYPE': 'PyScript',
-      'L_PATH': 'Scripts',
-      'L_ITEM': 'activate.py',
-      'L_ELEV': 'True',
-      },
     'd7II': {
       'L_TYPE': 'Executable',
       'L_PATH': 'd7II',
       'L_ITEM': 'd7II.exe',
       },
-    'New System Setup': {
+    'System Setup': {
       'L_TYPE': 'PyScript',
       'L_PATH': 'Scripts',
-      'L_ITEM': 'new_system_setup.py',
+      'L_ITEM': 'system_setup.py',
       'L_ELEV': 'True',
       },
-    'Post-d7II Work': {
-      'L_TYPE': 'PyScript',
-      'L_PATH': 'Scripts',
-      'L_ITEM': 'post_d7.py',
-      'L_ELEV': 'True',
-      },
-    'System Checklist': {
-      'L_TYPE': 'PyScript',
-      'L_PATH': 'Scripts',
-      'L_ITEM': 'system_checklist.py',
-      'L_ELEV': 'True',
-      },
-    'System Checklist (HW)': {
-      'L_TYPE': 'PyScript',
-      'L_PATH': 'Scripts',
-      'L_ITEM': 'system_checklist_hw.py',
-      'L_ELEV': 'True',
-      },
-    'User Checklist': {
-      'L_TYPE': 'PyScript',
-      'L_PATH': 'Scripts',
-      'L_ITEM': 'user_checklist.py',
-      },
     },
   r'.bin\Scripts\launchers_for_d7': {
     'Browser Reset': {
@@ -50,20 +21,6 @@ LAUNCHERS = {
       'L_ITEM': 'reset_browsers.py',
       'L_ARGS': 'd7mode',
       },
-    'Install SW Bundle': {
-      'L_TYPE': 'PyScript',
-      'L_PATH': 'Scripts',
-      'L_ITEM': 'install_sw_bundle.py',
-      'L_ARGS': 'd7mode',
-      'L_ELEV': 'True',
-      },
-    'System Checklist': {
-      'L_TYPE': 'PyScript',
-      'L_PATH': 'Scripts',
-      'L_ITEM': 'system_checklist.py',
-      'L_ARGS': 'd7mode',
-      'L_ELEV': 'True',
-      },
     'System Diagnostics': {
       'L_TYPE': 'PyScript',
       'L_PATH': 'Scripts',
@@ -71,12 +28,6 @@ LAUNCHERS = {
       'L_ARGS': 'd7mode',
       'L_ELEV': 'True',
       },
-    'User Checklist': {
-      'L_TYPE': 'PyScript',
-      'L_PATH': 'Scripts',
-      'L_ITEM': 'user_checklist.py',
-      'L_ARGS': 'd7mode',
-      },
     'Disable Windows Updates': {
       'L_TYPE': 'PyScript',
       'L_PATH': 'Scripts',
@@ -533,6 +484,12 @@ LAUNCHERS = {
       },
     },
   r'Misc': {
+    'Activate Windows': {
+      'L_TYPE': 'PyScript',
+      'L_PATH': 'Scripts',
+      'L_ITEM': 'activate.py',
+      'L_ELEV': 'True',
+      },
     'Cleanup CBS Temp Files': {
       'L_TYPE': 'PyScript',
       'L_PATH': 'Scripts',

.bin/Scripts/settings/main.py

@@ -25,16 +25,13 @@ QUICKBOOKS_SERVER_IP='10.11.1.20'
 # Time Zones
 LINUX_TIME_ZONE='America/Los_Angeles'     # See 'timedatectl list-timezones' for valid values
 WINDOWS_TIME_ZONE='Pacific Standard Time' # See 'tzutil /l' for valid values
-# WiFi
-WIFI_SSID='1201Computers'
-WIFI_PASSWORD='justintime!'
 
 # SERVER VARIABLES
 ## NOTE: Windows can only use one user per server. This means that if
 ##       one server serves multiple shares then you have to use the same
 ##       user/password for all of those shares.
 BACKUP_SERVERS = [
-  { 'IP':       '10.11.1.20',
+  { 'IP':       '10.120.1.15',
     'Name':     'Anaconda',
     'Mounted':  False,
     'Share':    'Backups',
@@ -43,18 +40,28 @@ BACKUP_SERVERS = [
     'RW-User':  'backup',
     'RW-Pass':  '1201 loves computers!',
   },
+  # DISABLED due to issues handling mounting a subdir
+  #{ 'IP':       '10.120.1.23',
+  #  'Name':     'Server1201',
+  #  'Mounted':  False,
+  #  'Share':    r'Public\TEMP',
+  #  'User':     'cx',
+  #  'Pass':     '',
+  #  'RW-User':  'it',
+  #  'RW-Pass':  'sorted',
+  #},
 ]
 BENCHMARK_SERVER = {
   'Name':       'Nextcloud',
-  'Short Url':  'https://1201north.ddns.net:8001/index.php/f/27892',
+  'Short Url':  'https://nextcloud.1201.com/index.php/f/108024',
-  'Url':        'https://1201north.ddns.net:8001/public.php/webdav/Benchmarks',
+  'Url':        'https://1201.ddns.net:8001/public.php/webdav/Benchmarks',
-  'User':       'RAE7ajRk25CBnW6',
+  'User':       'QAx28ZgmPwCwGHc',
   'Pass':       '',
 }
 CRASH_SERVER = {
   'Name':       'Nextcloud',
-  'Url':        'https://1201north.ddns.net:8001/public.php/webdav/WizardKit_Issues',
+  'Url':        'https://1201.ddns.net:8001/public.php/webdav/Issues',
-  'User':       'LoQ97J3r6CFGT2T',
+  'User':       'n9Ds76WizNyBw8Y',
   'Pass':       '',
 }
 OFFICE_SERVER = {
@@ -78,10 +85,10 @@ QUICKBOOKS_SERVER = {
   'RW-Pass':    '1201 loves computers!',
 }
 WINDOWS_SERVER = {
-  'IP':         '10.11.1.20',
+  'IP':         '10.120.1.15',
   'Name':       'Anaconda',
   'Mounted':    False,
-  'Share':     r'Public\Windows',
+  'Share':     r'HH-Proliant\Windows',
   'User':       'cx',
   'Pass':       'cx',
   'RW-User':    'backup',

.bin/Scripts/settings/osticket.py

@@ -26,6 +26,22 @@ OSTICKET = {
     'Ticket':     'ost_ticket',
     },
   }
+TEST_STATIONS = {
+  'bender':     'Bender',
+  'combine':    'Combine',
+  'control':    'Control',
+  'cortana':    'Cortana',
+  'data':       'Data',
+  'glados':     'GLaDOS',
+  'locutus':    'Locutus',
+  'lore':       'Lore',
+  'sex-robot':  'Sex-Robot',
+  'shodan':     'Shodan',
+  'six':        'Six',
+  'skynet':     'Skynet',
+  'supremo':    'Supremo',
+  'unicron':    'Unicron',
+  }
 
 if __name__ == '__main__':
   print("This file is not meant to be called directly.")

.bin/Scripts/settings/setup.py

@@ -1,13 +1,19 @@
-# Wizard Kit: Settings - Setup
+'''Wizard Kit: Settings - Setup'''
+# pylint: disable=bad-continuation,line-too-long
+# vim: sts=2 sw=2 ts=2
 
 import os
+try:
   import winreg
-
-# General
   HKU = winreg.HKEY_USERS
   HKCR = winreg.HKEY_CLASSES_ROOT
   HKCU = winreg.HKEY_CURRENT_USER
   HKLM = winreg.HKEY_LOCAL_MACHINE
+except ImportError:
+  if os.name != 'posix':
+    raise
+
+# General
 OTHER_RESULTS = {
   'Error': {
     'CalledProcessError':   'Unknown Error',
@@ -63,10 +69,18 @@ SETTINGS_CLASSIC_START = {
   }
 
 # ESET
-SETTINGS_ESET = {
+SETTINGS_ESET_SYSTEM = {
+  r'Software\ESET\ESET Security\CurrentVersion\Config\Settings\LiveGrid': {
+    'DWORD Items': {
+      'LiveGridFeedbackEnabled': 1,
+      },
+    },
+  }
+SETTINGS_ESET_USER = {
   r'Software\ESET\ESET Security\CurrentVersion\gui\UI_CONFIG': {
     'DWORD Items': {
       'FullScreenMode': 0,
+      'ShowAlertStatus': 0x40000000,
       'ShowDesktopAlert': 0,
       'ShowSplash': 0,
       },
@@ -109,6 +123,7 @@ SETTINGS_EXPLORER_SYSTEM = {
 SETTINGS_EXPLORER_USER = {
   # Desktop icons
   r'Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\ClassicStartMenu': {
+    'Invalid modes': ['Cur'],
     'DWORD Items': {
       # This PC
       '{20D04FE0-3AEA-1069-A2D8-08002B30309D}': 0,
@@ -117,6 +132,7 @@ SETTINGS_EXPLORER_USER = {
       },
     },
   r'Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel': {
+    'Invalid modes': ['Cur'],
     'DWORD Items': {
       # This PC
       '{20D04FE0-3AEA-1069-A2D8-08002B30309D}': 0,
@@ -124,6 +140,15 @@ SETTINGS_EXPLORER_USER = {
       '{59031a47-3f72-44a7-89c5-5595fe6b30ee}': 0,
       },
     },
+  # Desktop theme
+  r'Software\Microsoft\Windows\CurrentVersion\Themes\Personalize': {
+    'Invalid modes': ['Cur'],
+    'DWORD Items': {
+      # <= v1809 default
+      'AppsUseLightTheme': 1,
+      'SystemUsesLightTheme': 0,
+      },
+    },
   # Disable features
   r'Software\Microsoft\Windows\CurrentVersion\ContentDeliveryManager': {
     'DWORD Items': {
@@ -136,25 +161,49 @@ SETTINGS_EXPLORER_USER = {
     },
   # File Explorer
   r'Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced': {
+    'Invalid modes': ['Cur'],
     'DWORD Items': {
       # Replace PowerShell with CMD in Win+X menu
       'DontUsePowerShellOnWinX': 1,
       # Change default Explorer view to "Computer"
       'LaunchTo': 1,
+      },
+    },
+  r'SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Advanced': {
+    'DWORD Items': {
       # Launch Folder Windows in a Separate Process
       'SeparateProcess': 1,
       },
     },
   # Hide People bar
   r'Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\People': {
+    'Invalid modes': ['Cur'],
     'DWORD Items': {'PeopleBand': 0},
     },
   # Hide Search button / box
   r'Software\Microsoft\Windows\CurrentVersion\Search': {
+    'Invalid modes': ['Cur'],
     'DWORD Items': {'SearchboxTaskbarMode': 1},
     },
   }
 
+# Fast Startup
+SETTINGS_FAST_STARTUP = {
+  # Disable Fast Startup
+  r'SOFTWARE\Policies\Microsoft\Windows\System': {
+    'DWORD Items': {'HiberbootEnabled': 0},
+    },
+  }
+
+# LibreOffice
+LIBREOFFICE_XCU_DATA = '''<?xml version="1.0" encoding="UTF-8"?>
+<oor:items xmlns:oor="http://openoffice.org/2001/registry" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
+<item oor:path="/org.openoffice.Setup/Office/Factories/org.openoffice.Setup:Factory['com.sun.star.presentation.PresentationDocument']"><prop oor:name="ooSetupFactoryDefaultFilter" oor:op="fuse"><value>Impress MS PowerPoint 2007 XML</value></prop></item>
+<item oor:path="/org.openoffice.Setup/Office/Factories/org.openoffice.Setup:Factory['com.sun.star.sheet.SpreadsheetDocument']"><prop oor:name="ooSetupFactoryDefaultFilter" oor:op="fuse"><value>Calc MS Excel 2007 XML</value></prop></item>
+<item oor:path="/org.openoffice.Setup/Office/Factories/org.openoffice.Setup:Factory['com.sun.star.text.TextDocument']"><prop oor:name="ooSetupFactoryDefaultFilter" oor:op="fuse"><value>MS Word 2007 XML</value></prop></item>
+</oor:items>
+'''
+
 # Registry
 SETTINGS_REGBACK = {
   # Enable RegBack
@@ -201,5 +250,3 @@ SETTINGS_WINDOWS_UPDATES = {
 
 if __name__ == '__main__':
   print("This file is not meant to be called directly.")
-
-# vim: sts=2 sw=2 ts=2

.bin/Scripts/settings/sources.py

@@ -1,4 +1,6 @@
-# Wizard Kit: Settings - Sources
+'''Wizard Kit: Settings - Sources'''
+# pylint: disable=line-too-long
+# vim: sts=2 sw=2 ts=2 tw=0
 
 SOURCE_URLS = {
   'Adobe Reader DC': 'http://ardownload.adobe.com/pub/adobe/reader/win/AcrobatDC/1901020098/AcroRdrDC1901020098_en_US.exe',
@@ -17,7 +19,7 @@ SOURCE_URLS = {
   'ESET NOD32 AV': 'https://download.eset.com/com/eset/apps/home/eav/windows/latest/eav_nt64.exe',
   'Everything32': 'https://www.voidtools.com/Everything-1.4.1.935.x86.en-US.zip',
   'Everything64': 'https://www.voidtools.com/Everything-1.4.1.935.x64.en-US.zip',
-  'FastCopy': 'http://ftp.vector.co.jp/71/31/2323/FastCopy363_installer.exe',
+  'FastCopy': 'https://fastcopy.jp/archive/FastCopy380_installer.exe',
   'FurMark': 'https://geeks3d.com/dl/get/569',
   'Firefox uBO': 'https://addons.mozilla.org/firefox/downloads/file/1709472/ublock_origin-1.18.6-an+fx.xpi',
   'HitmanPro32': 'https://dl.surfright.nl/HitmanPro.exe',
@@ -26,6 +28,7 @@ SOURCE_URLS = {
   'Intel SSD Toolbox': r'https://downloadmirror.intel.com/28593/eng/Intel%20SSD%20Toolbox%20-%20v3.5.9.exe',
   'IOBit_Uninstaller': r'https://portableapps.com/redirect/?a=IObitUninstallerPortable&s=s&d=pa&f=IObitUninstallerPortable_7.5.0.7.paf.exe',
   'KVRT': 'http://devbuilds.kaspersky-labs.com/devbuilds/KVRT/latest/full/KVRT.exe',
+  'LibreOffice': 'https://download.documentfoundation.org/libreoffice/stable/6.2.4/win/x86_64/LibreOffice_6.2.4_Win_x64.msi',
   'Linux Reader': 'https://www.diskinternals.com/download/Linux_Reader.exe',
   'Macs Fan Control': 'https://www.crystalidea.com/downloads/macsfancontrol_setup.exe',
   'NirCmd32': 'https://www.nirsoft.net/utils/nircmd.zip',
@@ -40,10 +43,11 @@ SOURCE_URLS = {
   'SDIO Themes': 'http://snappy-driver-installer.org/downloads/SDIO_Themes.zip',
   'SDIO Torrent': 'http://snappy-driver-installer.org/downloads/SDIO_Update.torrent',
   'ShutUp10': 'https://dl5.oo-software.com/files/ooshutup10/OOSU10.exe',
+  'smartmontools': 'https://700-105252244-gh.circle-artifacts.com/0/builds/smartmontools-win32-setup-7.1-r4914.exe',
   'TDSSKiller': 'https://media.kaspersky.com/utilities/VirusUtilities/EN/tdsskiller.exe',
   'TestDisk': 'https://www.cgsecurity.org/testdisk-7.1-WIP.win.zip',
-  'wimlib32': 'https://wimlib.net/downloads/wimlib-1.13.0-windows-i686-bin.zip',
+  'wimlib32': 'https://wimlib.net/downloads/wimlib-1.13.1-windows-i686-bin.zip',
-  'wimlib64': 'https://wimlib.net/downloads/wimlib-1.13.0-windows-x86_64-bin.zip',
+  'wimlib64': 'https://wimlib.net/downloads/wimlib-1.13.1-windows-x86_64-bin.zip',
   'WinAIO Repair': 'http://www.tweaking.com/files/setups/tweaking.com_windows_repair_aio.zip',
   'Winapp2': 'https://github.com/MoscaDotTo/Winapp2/archive/master.zip',
   'WizTree': 'https://antibody-software.com/files/wiztree_3_28_portable.zip',
@@ -72,10 +76,18 @@ VCREDIST_SOURCES = {
     '64': 'https://aka.ms/vs/15/release/vc_redist.x64.exe',
     },
   }
+NINITE_REGEX = {
+  'base': ['7-Zip', 'VLC'],
+  'standard': ['Google Chrome', 'Mozilla Firefox', 'SumatraPDF'],
+  'standard7': ['Google Chrome', 'Mozilla Firefox', 'SumatraPDF'],
+  }
 NINITE_SOURCES = {
   'Bundles': {
-    'Legacy.exe': '.net4.7.2-7zip-chrome-firefox-sumatrapdf-vlc',
+    'base.exe': '.net4.7.2-7zip-vlc',
-    'Modern.exe': '.net4.7.2-7zip-chrome-classicstart-firefox-sumatrapdf-vlc',
+    'base-standard.exe': '.net4.7.2-7zip-chrome-classicstart-firefox-sumatrapdf-vlc',
+    'base-standard7.exe': '.net4.7.2-7zip-chrome-firefox-sumatrapdf-vlc',
+    'standard.exe': 'chrome-classicstart-firefox-sumatrapdf',
+    'standard7.exe': 'chrome-firefox-sumatrapdf',
     },
   'Audio-Video': {
     'AIMP.exe': 'aimp',
@@ -222,5 +234,3 @@ WINDOWS_UPDATE_SOURCES = {
 
 if __name__ == '__main__':
   print("This file is not meant to be called directly.")
-
-# vim: sts=2 sw=2 ts=2 tw=0

.bin/Scripts/settings/tools.py

@@ -43,6 +43,9 @@ TOOLS = {
   'SevenZip': {
     '32': r'7-Zip\7za.exe',
     '64': r'7-Zip\7za64.exe'},
+  'smartctl': {
+    '32': r'smartmontools\smartctl.exe',
+    '64': r'smartmontools\smartctl64.exe'},
   'TDSSKiller': {
     '32': r'TDSSKiller\TDSSKiller.exe'},
   'wimlib-imagex': {

.bin/Scripts/settings/ufd.py

@@ -0,0 +1,143 @@
+'''Wizard Kit: Settings - UFD'''
+# pylint: disable=C0326,E0611
+# vim: sts=2 sw=2 ts=2
+
+from collections import OrderedDict
+from settings.main import KIT_NAME_FULL,KIT_NAME_SHORT
+
+# General
+DOCSTRING = '''WizardKit: Build UFD
+
+Usage:
+  build-ufd [options] --ufd-device PATH --linux PATH
+            [--linux-minimal PATH]
+            [--main-kit PATH]
+            [--winpe PATH]
+            [--eset PATH]
+            [--hdclone PATH]
+            [--extra-dir PATH]
+  build-ufd (-h | --help)
+
+Options:
+  -c PATH, --hdclone PATH
+  -d PATH, --linux-dgpu PATH
+  -e PATH, --extra-dir PATH
+  -k PATH, --main-kit PATH
+  -l PATH, --linux PATH
+  -m PATH, --linux-minimal PATH
+  -s PATH, --eset PATH
+  -u PATH, --ufd-device PATH
+  -w PATH, --winpe PATH
+
+  -h --help             Show this page
+  -M --use-mbr          Use real MBR instead of GPT w/ Protective MBR
+  -F --force            Bypass all confirmation messages. USE WITH EXTREME CAUTION!
+  -U --update           Don't format device, just update
+'''
+ISO_LABEL = '{}_LINUX'.format(KIT_NAME_SHORT)
+UFD_LABEL = '{}_UFD'.format(KIT_NAME_SHORT)
+UFD_SOURCES = OrderedDict({
+  'Linux':            {'Arg': '--linux',          'Type': 'ISO'},
+  'Linux (dGPU)':     {'Arg': '--linux-dgpu',     'Type': 'ISO'},
+  'Linux (Minimal)':  {'Arg': '--linux-minimal',  'Type': 'ISO'},
+  'WinPE':            {'Arg': '--winpe',          'Type': 'ISO'},
+  'ESET SysRescue':   {'Arg': '--eset',           'Type': 'IMG'},
+  'HDClone':          {'Arg': '--hdclone',        'Type': 'IMG'},
+  'Main Kit':         {'Arg': '--main-kit',       'Type': 'KIT'},
+  'Extra Dir':        {'Arg': '--extra-dir',      'Type': 'DIR'},
+  })
+
+# Definitions: Boot entries
+BOOT_ENTRIES = {
+  # Path to check:      Comment to remove
+  '/arch_minimal':      'UFD-MINIMAL',
+  '/casper':            'UFD-ESET',
+  '/dgpu':              'UFD-DGPU',
+  '/kernel.map':        'UFD-HDCLONE',
+  '/sources/boot.wim':  'UFD-WINPE',
+  }
+BOOT_FILES = {
+  # Directory:            extension
+  '/arch/boot/syslinux':  'cfg',
+  '/boot/grub/':          'cfg',
+  '/EFI/boot':            'conf',
+  }
+
+# Definitions: Sources and Destinations
+## NOTES: Paths are relative to the root of the ISO/UFD
+##        Sources use rsync's trailing slash syntax
+ITEMS = {
+  'ESET SysRescue': (
+    ('/boot/grub/',                   '/boot/grub/'),
+    ('/casper/',                      '/casper/'),
+    ('/EFI/boot/',                    '/EFI/ESET/'),
+    ),
+  'Extra Dir': (
+    ('/',                             '/'),
+    ),
+  'HDClone': (
+    ('/bootenv',                      '/'),
+    ('/kernel.map',                   '/'),
+    ('/EFI/boot/',                    '/EFI/HDClone/'),
+    ('/hdclone.iso',                  '/sources/'),
+    ),
+  'Linux': (
+    ('/arch',                         '/'),
+    ('/isolinux',                     '/'),
+    ('/EFI/boot',                     '/EFI/'),
+    ('/EFI/memtest86',                '/EFI/'),
+    ),
+  'Linux (dGPU)': (
+    ('/arch/boot/x86_64/archiso.img', '/dgpu/'),
+    ('/arch/boot/x86_64/vmlinuz',     '/dgpu/'),
+    ('/arch/pkglist.x86_64.txt',      '/dgpu/'),
+    ('/arch/x86_64',                  '/dgpu/'),
+    ),
+  'Linux (Minimal)': (
+    ('/arch/boot/x86_64/archiso.img', '/arch_minimal/'),
+    ('/arch/boot/x86_64/vmlinuz',     '/arch_minimal/'),
+    ('/arch/pkglist.x86_64.txt',      '/arch_minimal/'),
+    ('/arch/x86_64',                  '/arch_minimal/'),
+    ),
+  'Main Kit': (
+    ('/',                             '/{}/'.format(KIT_NAME_FULL)),
+    ),
+  'WinPE': (
+    ('/bootmgr',                      '/'),
+    ('/bootmgr.efi',                  '/'),
+    ('/en_us',                        '/'),
+    ('/Boot/',                        '/boot/'),
+    ('/EFI/Boot/',                    '/EFI/Microsoft/'),
+    ('/EFI/Microsoft/',               '/EFI/Microsoft/'),
+    ('/Boot/BCD',                     '/sources/'),
+    ('/Boot/boot.sdi',                '/sources/'),
+    ('/bootmgr',                      '/sources/'),
+    ('/sources/boot.wim',             '/sources/'),
+    ),
+  }
+ITEMS_HIDDEN = (
+  # ESET
+  'casper',
+  # HDClone
+  'bootenv',
+  'kernel.map',
+  # Linux (all versions)
+  'arch',
+  'arch_minimal',
+  'dgpu',
+  'EFI',
+  'isolinux',
+  # Main Kit
+  '{}/.bin'.format(KIT_NAME_FULL),
+  '{}/.cbin'.format(KIT_NAME_FULL),
+  # WinPE
+  'boot',
+  'bootmgr',
+  'bootmgr.efi',
+  'en-us',
+  'images',
+  'sources',
+  )
+
+if __name__ == '__main__':
+  print("This file is not meant to be called directly.")

.bin/Scripts/settings/windows_builds.py

@@ -1,8 +1,10 @@
-# Wizard Kit: Settings - Windows Builds
+'''Wizard Kit: Settings - Windows Builds'''
+# pylint: disable=bad-continuation,bad-whitespace
+# vim: sts=2 sw=2 ts=2
+## NOTE: Data from here: https://en.wikipedia.org/wiki/Windows_10_version_history
 
 WINDOWS_BUILDS = {
   # Build, Version, Release, Codename, Marketing Name, Notes
-   '6000': ('Vista',  'RTM',    'Longhorn',     None,   'unsupported'),
    '6000': ('Vista',  'RTM',    'Longhorn',     None,   'unsupported'),
    '6001': ('Vista',  'SP1',    'Longhorn',     None,   'unsupported'),
    '6002': ('Vista',  'SP2',    'Longhorn',     None,   'unsupported'),
@@ -202,15 +204,22 @@ WINDOWS_BUILDS = {
   '18356': ('10',     None,     '19H1',         None,   'preview build'),
   '18358': ('10',     None,     '19H1',         None,   'preview build'),
   '18361': ('10',     None,     '19H1',         None,   'preview build'),
+  '18362': ('10',     'v1903',  '19H1',         'May 2019 Update', None),
   '18836': ('10',     None,     '20H1',         None,   'preview build'),
   '18841': ('10',     None,     '20H1',         None,   'preview build'),
   '18845': ('10',     None,     '20H1',         None,   'preview build'),
   '18850': ('10',     None,     '20H1',         None,   'preview build'),
   '18855': ('10',     None,     '20H1',         None,   'preview build'),
+  '18860': ('10',     None,     '20H1',         None,   'preview build'),
+  '18865': ('10',     None,     '20H1',         None,   'preview build'),
+  '18875': ('10',     None,     '20H1',         None,   'preview build'),
+  '18885': ('10',     None,     '20H1',         None,   'preview build'),
+  '18890': ('10',     None,     '20H1',         None,   'preview build'),
+  '18894': ('10',     None,     '20H1',         None,   'preview build'),
+  '18895': ('10',     None,     '20H1',         None,   'preview build'),
+  '18898': ('10',     None,     '20H1',         None,   'preview build'),
 }
 
 
 if __name__ == '__main__':
   print("This file is not meant to be called directly.")
-
-# vim: sts=2 sw=2 ts=2

.bin/Scripts/sfc_scan.py

@@ -32,8 +32,8 @@ if __name__ == '__main__':
     print_standard('\nDone.')
     pause('Press Enter to exit...')
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/system_checklist.py

@@ -1,160 +0,0 @@
-# Wizard Kit: System Checklist
-
-import os
-import sys
-
-# Init
-sys.path.append(os.path.dirname(os.path.realpath(__file__)))
-from functions.activation import *
-from functions.cleanup import *
-from functions.info import *
-from functions.product_keys import *
-from functions.setup import *
-from functions.sw_diags import *
-from functions.windows_updates import *
-init_global_vars()
-os.system('title {}: System Checklist Tool'.format(KIT_NAME_FULL))
-set_log_file('System Checklist.log')
-D7_MODE = 'd7mode' in sys.argv
-
-if __name__ == '__main__':
-  try:
-    stay_awake()
-    clear_screen()
-    print_info('{}: System Checklist Tool\n'.format(KIT_NAME_FULL))
-    ticket_number = get_ticket_number()
-    other_results = {
-      'Error': {
-        'BIOSKeyNotFoundError':   'BIOS key not found',
-        'CalledProcessError':     'Unknown Error',
-        'FileNotFoundError':    'File not found',
-        'GenericError':       'Unknown Error',
-        'SecureBootDisabledError':  'Disabled',
-      },
-      'Warning': {
-        'OSInstalledLegacyError':   'OS installed Legacy',
-        'SecureBootNotAvailError':  'Not available',
-        'SecureBootUnknownError':   'Unknown',
-      }}
-    if ENABLED_TICKET_NUMBERS:
-      print_info('Starting System Checklist for Ticket #{}\n'.format(
-        ticket_number))
-
-    # Configure
-    print_info('Configure')
-    if global_vars['OS']['Version'] == '10':
-      try_and_print(message='Explorer...',
-        function=config_explorer_system, cs='Done')
-      try_and_print(message='Disabling telemetry...',
-        function=disable_windows_telemetry, cs='Done')
-      try_and_print(message='Enabling RegBack...',
-        function=enable_regback, cs='Done')
-      try_and_print(message='Windows Updates...',
-        function=config_windows_updates, cs='Done')
-    try_and_print(message='Enabling BSoD mini dumps...',
-      function=enable_mini_dumps, cs='Done')
-    try_and_print(message='Enabling System Restore...',
-      function=enable_system_restore, cs='Done')
-    try_and_print(message='Create System Restore point...',
-      function=create_system_restore_point, cs='Done')
-    try_and_print(message='Enabling Windows Updates...',
-      function=enable_windows_updates, cs='Done', silent=True)
-    try_and_print(message='Updating Clock...',
-      function=update_clock, cs='Done')
-
-    # Restart Explorer
-    try_and_print(message='Restarting Explorer...',
-      function=restart_explorer, cs='Done')
-
-    # Cleanup
-    print_info('Cleanup')
-    try_and_print(message='AdwCleaner...',
-      function=cleanup_adwcleaner, cs='Done', other_results=other_results)
-    try_and_print(message='Desktop...',
-      function=cleanup_desktop, cs='Done')
-    try_and_print(message='Emsisoft a2cmd...',
-      function=cleanup_emsisoft, cs='Done')
-    try_and_print(message='Registry Backup(s)...',
-      function=cleanup_regbackups, cs='Done')
-    try_and_print(message='{}...'.format(KIT_NAME_FULL),
-      function=delete_empty_folders, cs='Done',
-      folder_path=global_vars['ClientDir'])
-
-    # Export system info
-    if not D7_MODE:
-      print_info('Backup System Information')
-      try_and_print(message='AIDA64 reports...',
-        function=run_aida64, cs='Done', other_results=other_results)
-      try_and_print(message='File listing...',
-        function=backup_file_list, cs='Done', other_results=other_results)
-      try_and_print(message='Power plans...',
-        function=backup_power_plans, cs='Done')
-      try_and_print(message='Product Keys...', other_results=other_results,
-        function=run_produkey, cs='Done')
-      try_and_print(message='Registry...',
-        function=backup_registry, cs='Done', other_results=other_results)
-
-    # User data
-    print_info('User Data')
-    show_user_data_summary()
-
-    # Summary
-    print_info('Summary')
-    try_and_print(message='Operating System:',
-      function=show_os_name, ns='Unknown', silent_function=False)
-    try_and_print(message='Activation:',
-      function=show_os_activation, ns='Unknown', silent_function=False)
-    if (not windows_is_activated()
-      and global_vars['OS']['Version'] in ('8', '8.1', '10')):
-      try_and_print(message='BIOS Activation:',
-        function=activate_with_bios,
-        other_results=other_results)
-    try_and_print(message='Secure Boot Status:',
-      function=check_secure_boot_status, other_results=other_results)
-    try_and_print(message='Installed RAM:',
-      function=show_installed_ram, ns='Unknown', silent_function=False)
-    show_free_space()
-    try_and_print(message='Installed Antivirus:',
-      function=get_installed_antivirus, ns='Unknown',
-      other_results=other_results, print_return=True)
-    try_and_print(message='Installed Office:',
-      function=get_installed_office, ns='Unknown',
-      other_results=other_results, print_return=True)
-    if D7_MODE:
-      try_and_print(message='Product Keys:',
-        function=get_product_keys, ns='Unknown', print_return=True)
-
-    # Play audio, show devices, open Windows updates, and open Activation
-    try_and_print(message='Opening Device Manager...',
-      function=open_device_manager, cs='Started')
-    try_and_print(message='Opening HWiNFO (Sensors)...',
-      function=run_hwinfo_sensors, cs='Started', other_results=other_results)
-    try_and_print(message='Opening Windows Updates...',
-      function=open_windows_updates, cs='Started')
-    if not windows_is_activated():
-      try_and_print(message='Opening Windows Activation...',
-        function=open_windows_activation, cs='Started')
-    sleep(3)
-    try_and_print(message='Running XMPlay...',
-      function=run_xmplay, cs='Started', other_results=other_results)
-    try:
-      check_secure_boot_status(show_alert=True)
-    except Exception:
-      # Only trying to open alert message boxes
-      pass
-
-    # Done
-    print_standard('\nDone.')
-    pause('Press Enter exit...')
-    if D7_MODE:
-      show_alert_box(
-        message='Please run the Post-d7II script after ending the session.',
-        title='{} Notice'.format(KIT_NAME_FULL),
-        )
-    exit_script()
-  except SystemExit:
-    pass
-  except:
-    major_exception()
-
-# vim: sts=2 sw=2 ts=2

.bin/Scripts/system_checklist_hw.py

@@ -1,122 +0,0 @@
-# Wizard Kit: System HW Checklist
-
-import os
-import sys
-
-# Init
-sys.path.append(os.path.dirname(os.path.realpath(__file__)))
-from functions.activation import *
-from functions.cleanup import *
-from functions.info import *
-from functions.product_keys import *
-from functions.setup import *
-from functions.sw_diags import *
-init_global_vars()
-os.system('title {}: System HW Checklist Tool'.format(KIT_NAME_FULL))
-set_log_file('System HW Checklist.log')
-
-if __name__ == '__main__':
-  try:
-    stay_awake()
-    clear_screen()
-    print_info('{}: System HW Checklist Tool\n'.format(KIT_NAME_FULL))
-    ticket_number = get_ticket_number()
-    other_results = {
-      'Error': {
-        'BIOSKeyNotFoundError':   'BIOS key not found',
-        'CalledProcessError':     'Unknown Error',
-        'FileNotFoundError':    'File not found',
-        'GenericError':       'Unknown Error',
-        'SecureBootDisabledError':  'Disabled',
-      },
-      'Warning': {
-        'OSInstalledLegacyError':   'OS installed Legacy',
-        'SecureBootNotAvailError':  'Not available',
-        'SecureBootUnknownError':   'Unknown',
-      }}
-    if ENABLED_TICKET_NUMBERS:
-      print_info('Starting System Checklist for Ticket #{}\n'.format(
-        ticket_number))
-
-    # Configure
-    print_info('Configure')
-    if global_vars['OS']['Version'] == '10':
-      try_and_print(message='Enabling RegBack...',
-        function=enable_regback, cs='Done')
-    try_and_print(message='Enabling BSoD mini dumps...',
-      function=enable_mini_dumps, cs='Done')
-    try_and_print(message='Enabling System Restore...',
-      function=enable_system_restore, cs='Done')
-    try_and_print(message='Create System Restore point...',
-      function=create_system_restore_point, cs='Done')
-
-    # Export system info
-    print_info('Backup System Information')
-    try_and_print(message='AIDA64 reports...',
-      function=run_aida64, cs='Done', other_results=other_results)
-    try_and_print(message='File listing...',
-      function=backup_file_list, cs='Done', other_results=other_results)
-    try_and_print(message='Power plans...',
-      function=backup_power_plans, cs='Done')
-    try_and_print(message='Product Keys...', other_results=other_results,
-      function=run_produkey, cs='Done')
-    try_and_print(message='Registry...',
-      function=backup_registry, cs='Done', other_results=other_results)
-
-    # Cleanup
-    print_info('Cleanup')
-    try_and_print(message='{}...'.format(KIT_NAME_FULL),
-      function=delete_empty_folders, cs='Done',
-      folder_path=global_vars['ClientDir'])
-
-    # User data
-    print_info('User Data')
-    show_user_data_summary()
-
-    # Summary
-    print_info('Summary')
-    try_and_print(message='Operating System:',
-      function=show_os_name, ns='Unknown', silent_function=False)
-    try_and_print(message='Activation:',
-      function=show_os_activation, ns='Unknown', silent_function=False)
-    try_and_print(message='Secure Boot Status:',
-      function=check_secure_boot_status, other_results=other_results)
-    try_and_print(message='Installed RAM:',
-      function=show_installed_ram, ns='Unknown', silent_function=False)
-    show_free_space()
-    try_and_print(message='Installed Antivirus:',
-      function=get_installed_antivirus, ns='Unknown',
-      other_results=other_results, print_return=True)
-    try_and_print(message='Installed Office:',
-      function=get_installed_office, ns='Unknown',
-      other_results=other_results, print_return=True)
-
-    # Play audio, show devices, open Windows updates, and open Activation
-    try_and_print(message='Opening Device Manager...',
-      function=open_device_manager, cs='Started')
-    try_and_print(message='Opening HWiNFO (Sensors)...',
-      function=run_hwinfo_sensors, cs='Started', other_results=other_results)
-    try_and_print(message='Opening Windows Updates...',
-      function=open_windows_updates, cs='Started')
-    if not windows_is_activated():
-      try_and_print(message='Opening Windows Activation...',
-        function=open_windows_activation, cs='Started')
-    sleep(3)
-    try_and_print(message='Running XMPlay...',
-      function=run_xmplay, cs='Started', other_results=other_results)
-    try:
-      check_secure_boot_status(show_alert=True)
-    except Exception:
-      # Only trying to open alert message boxes
-      pass
-
-    # Done
-    print_standard('\nDone.')
-    pause('Press Enter exit...')
-    exit_script()
-  except SystemExit:
-    pass
-  except:
-    major_exception()
-
-# vim: sts=2 sw=2 ts=2

.bin/Scripts/system_diagnostics.py

@@ -123,21 +123,22 @@ if __name__ == '__main__':
     result = try_and_print(
       message='CHKDSK ({SYSTEMDRIVE})...'.format(**global_vars['Env']),
       function=run_chkdsk, other_results=other_results)
-    system_ok &= check_result(result, other_results)
+    system_ok = system_ok and check_result(result, other_results)
     result = try_and_print(message='SFC scan...',
       function=run_sfc_scan, other_results=other_results)
-    system_ok &= check_result(result, other_results)
+    system_ok = system_ok and check_result(result, other_results)
     if D7_MODE:
       result = try_and_print(message='DISM RestoreHealth...',
         function=run_dism, other_results=other_results, repair=True)
       if global_vars['OS']['Version'] in ('8', '8.1', '10'):
-        system_ok &= check_result(result, other_results)
+        system_ok = system_ok and check_result(result, other_results)
     else:
       try_and_print(message='DISM CheckHealth...',
         function=run_dism, other_results=other_results, repair=False)
 
     if D7_MODE:
       # Archive all browsers for all users
+      print_standard(' ')
       archive_all_users()
     else:
       # Scan for supported browsers
@@ -149,23 +150,24 @@ if __name__ == '__main__':
     for k, v in sorted(BLEACH_BIT_CLEANERS.items()):
       try_and_print(message='{}...'.format(k),
         function=run_bleachbit,
-        cs='Done', other_results=other_results,
+        cs='SUCCESS', other_results=other_results,
         cleaners=v, preview=bool(not D7_MODE))
+    print_standard(' ')
 
     # Export system info
+    if not D7_MODE:
       print_info('Backup System Information')
       try_and_print(message='AIDA64 reports...',
-      function=run_aida64, cs='Done', other_results=other_results)
+        function=run_aida64, cs='SUCCESS', other_results=other_results)
-    if not D7_MODE:
       backup_browsers()
       try_and_print(message='File listing...',
-      function=backup_file_list, cs='Done', other_results=other_results)
+        function=backup_file_list, cs='SUCCESS', other_results=other_results)
       try_and_print(message='Power plans...',
-      function=backup_power_plans, cs='Done')
+        function=backup_power_plans, cs='SUCCESS')
       try_and_print(message='Product Keys...',
-      function=run_produkey, cs='Done', other_results=other_results)
+        function=run_produkey, cs='SUCCESS', other_results=other_results)
       try_and_print(message='Registry...',
-      function=backup_registry, cs='Done', other_results=other_results,
+        function=backup_registry, cs='SUCCESS', other_results=other_results,
         overwrite=True)
 
     # Summary
@@ -202,8 +204,8 @@ if __name__ == '__main__':
       print_standard('\nDone.')
       pause('Press Enter to exit...')
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/system_setup.py

@@ -0,0 +1,394 @@
+'''Wizard Kit: System Setup'''
+# pylint: disable=wildcard-import,wrong-import-position
+# vim: sts=2 sw=2 ts=2
+
+import os
+import sys
+
+# Init
+sys.path.append(os.path.dirname(os.path.realpath(__file__)))
+from collections import OrderedDict
+from functions.activation import *
+from functions.browsers import *
+from functions.cleanup import *
+from functions.info import *
+from functions.product_keys import *
+from functions.setup import *
+from functions.sw_diags import *
+from functions.windows_updates import *
+init_global_vars()
+os.system('title {}: System Setup'.format(KIT_NAME_FULL))
+set_log_file('System Setup.log')
+
+
+# STATIC VARIABLES
+# pylint: disable=bad-whitespace,line-too-long
+OTHER_RESULTS = {
+  'Error': {
+    'BIOSKeyNotFoundError':     'BIOS KEY NOT FOUND',
+    'CalledProcessError':       'UNKNOWN ERROR',
+    'FileNotFoundError':        'FILE NOT FOUND',
+    'GenericError':             'UNKNOWN ERROR',
+    'Not4KAlignedError':        'FALSE',
+    'SecureBootDisabledError':  'DISABLED',
+    'WindowsUnsupportedError':  'UNSUPPORTED',
+  },
+  'Warning': {
+    'GenericRepair':            'REPAIRED',
+    'NoProfilesError':          'NO PROFILES FOUND',
+    'NotInstalledError':        'NOT INSTALLED',
+    'OSInstalledLegacyError':   'OS INSTALLED LEGACY',
+    'SecureBootNotAvailError':  'NOT AVAILABLE',
+    'SecureBootUnknownError':   'UNKNOWN',
+    'UnsupportedOSError':       'UNSUPPORTED OS',
+    'WindowsOutdatedError':     'OUTDATED',
+    },
+  }
+SETUP_ACTIONS = OrderedDict({
+  # Install software
+  'Installing Programs':    {'Info': True},
+  'VCR':                    {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': install_vcredists, 'Just run': True,},
+  'ESET NOD32 AV':          {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': install_eset_nod32_av, 'If answer': 'ESET', 'KWArgs': {'msp': False},},
+  'LibreOffice':            {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': install_libreoffice,
+                             'If answer': 'LibreOffice', 'KWArgs': {'quickstart': False, 'register_mso_types': True, 'use_mso_formats': True, 'vcredist': False},
+                             },
+  'Ninite bundle':          {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': install_ninite_bundle, 'KWArgs': {'cs': 'STARTED'},},
+
+  # Browsers
+  'Scanning for browsers':  {'Info': True},
+  'Scan':                   {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': scan_for_browsers, 'Just run': True, 'KWArgs': {'skip_ie': True},},
+  'Backing up browsers':    {'Info': True},
+  'Backup browsers':        {'New': False,  'Fab': True,  'Cur': True,  'HW': False, 'Function': backup_browsers, 'Just run': True,},
+
+  # Install extensions
+  'Installing Extensions':  {'Info': True},
+  'Classic Shell skin':     {'New': True,   'Fab': True,  'Cur': False, 'HW': False, 'Function': install_classicstart_skin, 'Win10 only': True,},
+  'Chrome extensions':      {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': install_chrome_extensions,},
+  'Firefox extensions':     {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': install_firefox_extensions,},
+
+  # Configure software'
+  'Configuring Programs':   {'Info': True},
+  'Browser add-ons':        {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': install_adblock, 'Just run': True,
+                             'Pause': 'Please enable uBlock Origin for all browsers',
+                             },
+  'Classic Start':          {'New': True,   'Fab': True,  'Cur': False, 'HW': False, 'Function': config_classicstart, 'Win10 only': True,},
+  'Config Windows Updates': {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': config_windows_updates, 'Win10 only': True,},
+  'Enable System Restore':  {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': enable_system_restore,},
+  'Create System Restore':  {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': create_system_restore_point,},
+  'Disable Fast Startup':   {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': disable_fast_startup, 'If answer': 'Fast-Hiber', 'Win10 only': True,},
+  'Disable telemetry':      {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': disable_windows_telemetry, 'Win10 only': True,},
+  'Enable BSoD mini dumps': {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': enable_mini_dumps,},
+  'Enable Hibernation':     {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': enable_hibernation, 'If answer': 'Fast-Hiber', 'Win10 only': True,},
+  'Enable RegBack':         {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': enable_regback, 'Win10 only': True,},
+  'Enable Windows Updates': {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': enable_windows_updates, 'KWArgs': {'silent': True},},
+  'Explorer (system)':      {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': config_explorer_system, 'Win10 only': True,},
+  'Explorer (user)':        {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': config_explorer_user, 'Win10 only': True,},
+  'Restart Explorer':       {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': restart_explorer,},
+  'Update Clock':           {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': update_clock,},
+
+  # Cleanup
+  'Cleaning up':            {'Info': True},
+  'AdwCleaner':             {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': cleanup_adwcleaner,},
+  'd7II':                   {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': cleanup_d7ii,},
+  'Desktop':                {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': cleanup_desktop,},
+  'Emsisoft s2cmd':         {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': cleanup_emsisoft,},
+  'Registry Backup(s)':     {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': cleanup_regbackups,},
+  'KIT_NAME_FULL':          {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': delete_empty_folders,},
+
+  # System Info
+  'Exporting system info':  {'Info': True},
+  'AIDA64 Report':          {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': run_aida64,},
+  'File listing':           {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': backup_file_list,},
+  'Power plans':            {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': backup_power_plans,},
+  'Product Keys':           {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': run_produkey,},
+  'Registry':               {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': backup_registry,},
+
+  # Show Summary
+  'Summary':                {'Info': True},
+  'Operating System':       {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': show_os_name, 'KWArgs': {'ns': 'UNKNOWN', 'silent_function': False},},
+  'Activation':             {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': show_os_activation, 'KWArgs': {'ns': 'UNKNOWN', 'silent_function': False},},
+  'BIOS Activation':        {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': activate_with_bios, 'If not activated': True,},
+  'Secure Boot':            {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': check_secure_boot_status, 'KWArgs': {'show_alert': False},},
+  'Installed RAM':          {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': show_installed_ram, 'KWArgs': {'ns': 'UNKNOWN', 'silent_function': False},},
+  'Temp size':              {'New': False,  'Fab': False, 'Cur': True,  'HW': False, 'Function': show_temp_files_size, 'KWArgs': {'ns': 'UNKNOWN', 'silent_function': False},},
+  'Show free space':        {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': show_free_space, 'Just run': True,},
+  'Installed AV':           {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': get_installed_antivirus, 'KWArgs': {'ns': 'UNKNOWN', 'print_return': True},},
+  'Installed Office':       {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': get_installed_office, 'KWArgs': {'ns': 'UNKNOWN', 'print_return': True},},
+  'Partitions 4K aligned':  {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': check_4k_alignment, 'KWArgs': {'cs': 'TRUE', 'ns': 'FALSE'},},
+
+  # Open things
+  'Opening Programs':       {'Info': True},
+  'Device Manager':         {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': open_device_manager, 'KWArgs': {'cs': 'STARTED'},},
+  'HWiNFO sensors':         {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': run_hwinfo_sensors, 'KWArgs': {'cs': 'STARTED'},},
+  'Snappy':                 {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': open_snappy_driver_origin, 'KWArgs': {'cs': 'STARTED'},},
+  'Speed test':             {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': open_speedtest, 'KWArgs': {'cs': 'STARTED'},},
+  'Windows Updates':        {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': open_windows_updates, 'KWArgs': {'cs': 'STARTED'},},
+  'Windows Activation':     {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Function': open_windows_activation, 'If not activated': True, 'KWArgs': {'cs': 'STARTED'},},
+  'Sleep':                  {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': sleep, 'Just run': True, 'KWArgs': {'seconds': 3},},
+  'XMPlay':                 {'New': True,   'Fab': True,  'Cur': True,  'HW': True,  'Function': run_xmplay, 'KWArgs': {'cs': 'STARTED'},},
+  })
+SETUP_ACTION_KEYS = (
+  'Function',
+  'If not activated',
+  'Info',
+  'Just run',
+  'KWArgs',
+  'Pause',
+  )
+SETUP_QUESTIONS = {
+  # AV
+  'ESET':         {'New': None,   'Fab': None,  'Cur': None,  'HW': False},
+  'MSE':          {'New': None,   'Fab': None,  'Cur': None,  'HW': False, 'Ninite': True},
+
+  # Fast Startup / Hibernation
+  'Fast-Hiber':   {'New': None,   'Fab': None,  'Cur': None,  'HW': False},
+
+  # LibreOffice
+  'LibreOffice':  {'New': None,   'Fab': None,  'Cur': None,  'HW': False, 'Ninite': True},
+
+  # Ninite
+  'Base':         {'New': True,   'Fab': True,  'Cur': True,  'HW': False, 'Ninite': True},
+  'Missing':      {'New': False,  'Fab': True,  'Cur': False, 'HW': False, 'Ninite': True},
+  'Standard':     {'New': True,   'Fab': True,  'Cur': False, 'HW': False, 'Ninite': True},
+  }
+# pylint: enable=bad-whitespace,line-too-long
+
+
+# Functions
+def check_os_and_abort():
+  """Check OS and prompt to abort if not supported."""
+  result = try_and_print(
+    message='OS support status...',
+    function=check_os_support_status,
+    cs='GOOD',
+    )
+  if not result['CS'] and 'Unsupported' in result['Error']:
+    print_warning('OS version not supported by this script')
+    if not ask('Continue anyway? (NOT RECOMMENDED)'):
+      abort()
+
+
+def get_actions(setup_mode, answers):
+  """Get actions to perform based on setup_mode, returns OrderedDict."""
+  actions = OrderedDict({})
+  for _key, _val in SETUP_ACTIONS.items():
+    _action = {}
+    _if_answer = _val.get('If answer', False)
+    _win10_only = _val.get('Win10 only', False)
+
+    # Set enabled status
+    _enabled = _val.get(setup_mode, False)
+    if _if_answer:
+      _enabled = _enabled and answers[_if_answer]
+    if _win10_only:
+      _enabled = _enabled and global_vars['OS']['Version'] == '10'
+    _action['Enabled'] = _enabled
+
+    # Set other keys
+    for _sub_key in SETUP_ACTION_KEYS:
+      _action[_sub_key] = _val.get(_sub_key, None)
+
+    # Fix KWArgs
+    if _action.get('KWArgs', {}) is None:
+      _action['KWArgs'] = {}
+
+    # Handle "special" actions
+    if _key == 'KIT_NAME_FULL':
+      # Cleanup WK folders
+      _key = KIT_NAME_FULL
+      _action['KWArgs'] = {'folder_path': global_vars['ClientDir']}
+    elif _key == 'Ninite bundle':
+      # Add install_ninite_bundle() kwargs
+      _action['KWArgs'].update({
+        kw.lower(): kv for kw, kv in answers.items()
+        if SETUP_QUESTIONS.get(kw, {}).get('Ninite', False)
+        })
+    elif _key == 'Explorer (user)':
+      # Explorer settings (user)
+      _action['KWArgs'] = {'setup_mode': setup_mode}
+
+    # Add to dict
+    actions[_key] = _action
+
+  return actions
+
+
+def get_answers(setup_mode):
+  """Get setup answers based on setup_mode and user input, returns dict."""
+  answers = {k: v.get(setup_mode, False) for k, v in SETUP_QUESTIONS.items()}
+
+  # Answer setup questions as needed
+  if answers['ESET'] is None or answers['MSE'] is None:
+    answers.update(get_av_selection())
+
+  if answers['LibreOffice'] is None:
+    answers['LibreOffice'] = ask('Install LibreOffice?')
+
+  if answers['Fast-Hiber'] is None:
+    if global_vars['OS']['Version'] == '10':
+      # SSD check
+      if drive_is_rotational(global_vars['Env']['SYSTEMDRIVE']):
+        answers['Fast-Hiber'] = True
+      else:
+        print_standard(' ')
+        print_standard('Disable Fast Startup and enable Hibernation?')
+        print_standard('    Recommended for SSDs, optional for HDDs')
+        answers['Fast-Hiber'] = ask('    Proceed?')
+    else:
+      answers['Fast-Hiber'] = False
+
+  return answers
+
+
+def get_av_selection():
+  """Get AV selection."""
+  av_answers = {
+    'ESET': False,
+    'MSE': False,
+    }
+  av_options = [
+    {'Name': 'ESET NOD32 AV'},
+    {
+      'Name': 'Microsoft Security Essentials',
+      'Disabled': global_vars['OS']['Version'] not in ['7'],
+      },
+    ]
+  actions = [
+    {'Name': 'None', 'Letter': 'N'},
+    {'Name': 'Quit', 'Letter': 'Q'},
+    ]
+
+  # Show menu
+  selection = menu_select(
+    'Please select an option to install',
+    main_entries=av_options,
+    action_entries=actions)
+  if selection.isnumeric():
+    index = int(selection) - 1
+    if 'ESET' in av_options[index]['Name']:
+      av_answers['ESET'] = True
+      av_answers['MSE'] = False
+    elif 'Microsoft' in av_options[index]['Name']:
+      av_answers['ESET'] = False
+      av_answers['MSE'] = True
+  elif selection == 'Q':
+    abort()
+
+  # ESET settings
+  if av_answers['ESET'] and ask('  Use MSP settings (ITS/VIP)?'):
+    # NOTE: There's probably a better way than updating a static var...
+    SETUP_ACTIONS['ESET NOD32 AV']['KWArgs']['msp'] = True
+
+  return av_answers
+
+
+def get_mode():
+  """Get mode via menu_select, returns str."""
+  setup_mode = None
+  mode_options = [
+    {'Name': 'New', 'Display Name': 'New / Clean install (no data)'},
+    {'Name': 'Fab', 'Display Name': 'Clean install with data migration'},
+    {'Name': 'Cur', 'Display Name': 'Original OS (post-d7II or overinstall)'},
+    {'Name': 'HW', 'Display Name': 'Hardware service (i.e. no software work)'},
+    ]
+  actions = [
+    {'Name': 'Quit', 'Letter': 'Q'},
+    ]
+
+  # Get selection
+  selection = menu_select(
+    'Please select a setup mode',
+    main_entries=mode_options,
+    action_entries=actions)
+  if selection.isnumeric():
+    index = int(selection) - 1
+    setup_mode = mode_options[index]['Name']
+  elif selection == 'Q':
+    abort()
+
+  return setup_mode
+
+
+def main():
+  """Main function."""
+  stay_awake()
+  clear_screen()
+
+  # Check installed OS
+  check_os_and_abort()
+
+  # Get setup mode
+  setup_mode = get_mode()
+
+  # Get answers to setup questions
+  answers = get_answers(setup_mode)
+
+  # Get actions to perform
+  actions = get_actions(setup_mode, answers)
+
+  # Perform actions
+  for action, values in actions.items():
+    kwargs = values.get('KWArgs', {})
+
+    # Print info lines
+    if values.get('Info', False):
+      print_info(action)
+      continue
+
+    # Print disabled actions
+    if not values.get('Enabled', False):
+      show_data(
+        message='{}...'.format(action),
+        data='DISABLED',
+        warning=True,
+        )
+      continue
+
+    # Check Windows activation if requested
+    if values.get('If not activated', False) and windows_is_activated():
+      # Skip
+      continue
+
+    # Run function
+    if values.get('Just run', False):
+      values['Function'](**kwargs)
+    else:
+      result = try_and_print(
+        message='{}...'.format(action),
+        function=values['Function'],
+        other_results=OTHER_RESULTS,
+        **kwargs)
+
+    # Wait for Ninite proc(s)
+    if action == 'Ninite bundle':
+      print_standard('Waiting for installations to finish...')
+      try:
+        for proc in result['Out']:
+          proc.wait()
+      except KeyboardInterrupt:
+        pass
+
+    # Pause
+    if values.get('Pause', False):
+      print_standard(values['Pause'])
+      pause()
+
+  # Show alert box for SecureBoot issues
+  try:
+    check_secure_boot_status(show_alert=True)
+  except Exception: # pylint: disable=broad-except
+    # Ignoring exceptions since we just want to show the popup
+    pass
+
+  # Done
+  pause('Press Enter to exit... ')
+
+
+if __name__ == '__main__':
+  try:
+    main()
+    exit_script()
+  except SystemExit as sys_exit:
+    exit_script(sys_exit.code)
+  except: # pylint: disable=bare-except
+    major_exception()

.bin/Scripts/transferred_keys.py

@@ -21,8 +21,8 @@ if __name__ == '__main__':
     # Done
     print_standard('\nDone.')
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/update_kit.py

@@ -60,6 +60,8 @@ if __name__ == '__main__':
     print_info('  Installers')
     try_and_print(message='Adobe Reader DC...', function=update_adobe_reader_dc, other_results=other_results, width=40)
     try_and_print(message='ESET Configs...', function=update_eset_config, other_results=other_results, width=40)
+    try_and_print(message='ESET NOD32...', function=update_eset_nod32, other_results=other_results, width=40)
+    try_and_print(message='LibreOffice...', function=update_libreoffice, other_results=other_results, width=40)
     try_and_print(message='Macs Fan Control...', function=update_macs_fan_control, other_results=other_results, width=40)
     try_and_print(message='MS Office...', function=update_office, other_results=other_results, width=40)
     try_and_print(message='Visual C++ Runtimes...', function=update_vcredists, other_results=other_results, width=40)
@@ -75,6 +77,7 @@ if __name__ == '__main__':
     try_and_print(message='Firefox Extensions...', function=update_firefox_ublock_origin, other_results=other_results, width=40)
     try_and_print(message='PuTTY...', function=update_putty, other_results=other_results, width=40)
     try_and_print(message='ShutUp10...', function=update_shutup10, other_results=other_results, width=40)
+    try_and_print(message='smartmontools...', function=update_smartmontools, other_results=other_results, width=40)
     try_and_print(message='Notepad++...', function=update_notepadplusplus, other_results=other_results, width=40)
     try_and_print(message='WizTree...', function=update_wiztree, other_results=other_results, width=40)
     try_and_print(message='XMPlay...', function=update_xmplay, other_results=other_results, width=40)
@@ -126,22 +129,12 @@ if __name__ == '__main__':
           section=section, name=name, options=options,
           other_results=other_results, width=40)
 
-    # Rename "Copy WizardKit.cmd" (if necessary)
-    source = r'{}\Scripts\Copy WizardKit.cmd'.format(global_vars['BinDir'])
-    dest = r'{}\Copy {}.cmd'.format(global_vars['BaseDir'], KIT_NAME_FULL)
-    if os.path.exists(source):
-      try:
-        shutil.move(source, dest)
-      except Exception:
-        print_error('  Failed to rename "{}.cmd" to "{}.cmd"'.format(
-          'Copy WizardKit', KIT_NAME_FULL))
-
     # Done
     print_standard('\nDone.')
     pause("Press Enter to exit...")
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/user_checklist.py

@@ -1,101 +0,0 @@
-# Wizard Kit: User Checklist
-
-import os
-import sys
-
-# Init
-sys.path.append(os.path.dirname(os.path.realpath(__file__)))
-from functions.browsers import *
-from functions.cleanup import *
-from functions.setup import *
-init_global_vars()
-os.system('title {}: User Checklist Tool'.format(KIT_NAME_FULL))
-set_log_file('User Checklist ({USERNAME}).log'.format(**global_vars['Env']))
-D7_MODE = 'd7mode' in sys.argv
-
-if __name__ == '__main__':
-  try:
-    stay_awake()
-    clear_screen()
-    print_info('{}: User Checklist\n'.format(KIT_NAME_FULL))
-    other_results = {
-      'Warning': {
-        'NotInstalledError': 'Not installed',
-        'NoProfilesError': 'No profiles found',
-      }}
-    #answer_config_browsers = ask('Install adblock?')
-    answer_config_browsers = True
-    if answer_config_browsers:
-      if D7_MODE:
-        # This is handled by another script option in d7ii
-        answer_reset_browsers = False
-      else:
-        answer_reset_browsers = ask(
-          'Reset browsers to safe defaults first?')
-    if global_vars['OS']['Version'] == '10':
-      answer_config_classicshell = True
-      answer_config_explorer_user = True
-
-    # Cleanup
-    print_info('Cleanup')
-    try_and_print(message='Desktop...',
-      function=cleanup_desktop, cs='Done')
-
-    # Scan for supported browsers
-    print_info('Scanning for browsers')
-    scan_for_browsers(skip_ie=True)
-
-    # Homepages
-    if not D7_MODE:
-      print_info('Current homepages')
-      list_homepages()
-
-    # Backup
-    if not D7_MODE:
-      # Done during system_diagnostics
-      print_info('Backing up browsers')
-      backup_browsers()
-
-    # Reset
-    if answer_config_browsers and answer_reset_browsers:
-      print_info('Resetting browsers')
-      reset_browsers()
-
-    # Configure
-    print_info('Configuring programs')
-    if answer_config_browsers:
-      install_adblock()
-    if global_vars['OS']['Version'] == '10':
-      if answer_config_classicshell:
-        try_and_print(message='ClassicStart...',
-          function=config_classicstart, cs='Done')
-      if answer_config_explorer_user:
-        try_and_print(message='Explorer...',
-          function=config_explorer_user, cs='Done')
-      if (not answer_config_browsers
-        and not answer_config_classicshell
-        and not answer_config_explorer_user):
-        print_warning('    Skipped')
-    else:
-      if not answer_config_browsers:
-        print_warning('    Skipped')
-
-    # Restart Explorer
-    try_and_print(message='Restarting Explorer...',
-      function=restart_explorer, cs='Done')
-
-    # Run speedtest
-    if not D7_MODE:
-      popen_program(['start', '', 'https://fast.com'], shell=True)
-
-    # Done
-    if not D7_MODE:
-      print_standard('\nDone.')
-      pause('Press Enter to exit...')
-    exit_script()
-  except SystemExit:
-    pass
-  except:
-    major_exception()
-
-# vim: sts=2 sw=2 ts=2

.bin/Scripts/user_data_transfer.py

@@ -59,8 +59,8 @@ if __name__ == '__main__':
     print_standard('\nDone.')
     pause("Press Enter to exit...")
     exit_script()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/windows_updates.py

@@ -43,8 +43,8 @@ if __name__ == '__main__':
         print_standard('Please reboot and try again.')
     pause('Press Enter to exit... ')
     exit_script(1)
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/Scripts/winpe_root_menu.py

@@ -15,8 +15,8 @@ set_log_file('WinPE.log')
 if __name__ == '__main__':
   try:
     menu_root()
-  except SystemExit:
+  except SystemExit as sys_exit:
-    pass
+    exit_script(sys_exit.code)
   except:
     major_exception()
 

.bin/_Drivers/SDIO/sdi.cfg

@@ -21,4 +21,4 @@
 -uplimit:1
 -connections:0
 
--expertmode -norestorepnt -showdrpnames2 -onlyupdates -preservecfg -novirusalerts
+-expertmode -showdrpnames2 -onlyupdates -preservecfg -novirusalerts

.bin/d7ii/3rd Party Tools/Python_Check.cmd

@@ -0,0 +1,30 @@
+:: Python compatibility check
+@echo off
+
+setlocal
+pushd "%~dp0\..\.."
+set "bin=%cd%"
+set "python=%bin%\Python\x32\python.exe"
+
+rem Verify Python can run
+"%python%" --version >nul || goto ErrorPythonUnsupported
+goto Done
+
+:ErrorPythonUnsupported
+rem The Windows installation lacks Windows update KB2999226 needed to run Python
+echo.
+echo ERROR: Failed to run Python, try installing Windows update KB2999226.
+echo NOTE: That update is from October 2015 so this system is SEVERELY outdated
+echo.
+echo Please stop Auto Mode, exit this script, install the update, and try again.
+echo.
+echo Press Enter to exit...
+pause>nul
+if exist "%bin%\..\Installers\Extras\Windows Updates" (
+  start "" "explorer.exe"
+  start "" "explorer.exe" "%bin%\..\Installers\Extras\Windows Updates"
+)
+
+:Done
+popd
+endlocal

.bin/d7ii/Config/AltText.ini

@@ -5,7 +5,7 @@ Autoruns (Verify and Log)=Manages Startup Items
 Google Chrome Software Removal Tool=Remove add-ons, extensions, toolbars, and other software that may interfere with the operation of Google Chrome.
 VipreRescueScanner (Deep Scan)=Virus scanner (Designed for both the Malware Removal and the Offline Operations tab)
 VipreRescueScanner (Quick Scan)=Virus scanner (Designed for both the Malware Removal and the Offline Operations tab)
-=Install/Upgrade MBAM
+=Python Check
 [ReportDesc]
 Autoruns=Examined Windows startup items and removed unnecessary entries.
 Autoruns_Copy=Examined Windows startup items and removed unnecessary entries.
@@ -36,4 +36,4 @@ VipreRescueScanner (Quick Scan)=Ran virus scans (Vipre)
 22=Repaired the Windows Update services responsible for Windows Update functionality.
 38=Performed repair routines to ensure the Winsock is operating properly.
 83=Examined internet speed/bandwidth.
-=Malwarebytes installed successfully.
+=Python compatibility check

.bin/d7ii/Config/CustomApps/Disable Windows Updates.cfg

@@ -1,5 +1,5 @@
 [Config]
-LastEditDate=8/30/2018 10:49:46 AM
+LastEditDate=5/6/2019 6:09:55 PM
 PostRunApp=
 AppParms=.bin\Scripts\launchers_for_d7\Disable Windows Updates.cmd
 UseFTPServer=0
@@ -9,7 +9,7 @@ AppWait=1
 EmailBeforeExecution=0
 PriorAlert=0
 ServiceWait=0
-AppMsgBox=1
+AppMsgBox=0
 AppRandomize=0
 SaveConfigAfter=0
 MoveSnatchReports=0

.bin/d7ii/Config/CustomApps/Python Check.cfg

@@ -0,0 +1,32 @@
+[Config]
+LastEditDate=5/6/2019 6:48:27 PM
+PostRunApp=
+AppDesc=Python Check
+App=Python_Check.cmd
+UseFTPServer=0
+AlwaysAttemptDownload=0
+DLafterXdays=5
+AppWait=0
+EmailBeforeExecution=0
+PriorAlert=0
+ServiceWait=0
+AppMsgBox=0
+AppWaitTime=30
+AppRandomize=0
+SaveConfigAfter=0
+MoveSnatchReports=0
+SnatchReportsToMalwareLogs=1
+RunInCMD=0
+SendEnter=0
+RunWithSystemAccess=0
+IsDLInstaller=0
+LogVerbiage=Python compatibility check
+32=1
+64=1
+XP=1
+Vista=1
+7=1
+8=1
+Servers=1
+NonDirectURLs=0
+AutoFlag=0

.bin/d7ii/Config/Profiles/Default.cfg

@@ -782,6 +782,7 @@ WizardKit System Diagnostics=1
 1=1
 RKill (Auto)=1
 Disable Windows Updates=1
+Python Check=1
 [Malware3]
 ComboFix=0
 ComboFix (Uninstall)=0

.bin/d7ii/Config/SortOrder/MalwareBox2.cfg

@@ -1 +1 @@
-Disable Windows Updates|98|RKill (Auto)|Kaspersky TDSSKiller (Silent)|WizardKit System Diagnostics|34|Emsisoft a2cmd Deep Scan|HitmanPro|1|98|
+Python Check|Disable Windows Updates|98|RKill (Auto)|Kaspersky TDSSKiller (Silent)|WizardKit System Diagnostics|34|Emsisoft a2cmd Deep Scan|HitmanPro|1|98|

.bin/d7ii/Config/SortOrder/MalwareBox3.cfg

@@ -1 +1 @@
-Malwarebytes Download|Malwarebytes Install|Malwarebytes Scan|Malwarebytes Uninstall|AdwCleaner (Updated)|IObit Uninstaller|Install SW Bundle|WizardKit Browser Reset|WizardKit User Checklist|WizardKit System Checklist|Bitdefender Rootkit Remover|
+Malwarebytes Download|Malwarebytes Install|Malwarebytes Scan|Malwarebytes Uninstall|AdwCleaner (Updated)|IObit Uninstaller|Bitdefender Rootkit Remover|

.cbin/_include/AIDA64/full.rpf

@@ -92,7 +92,6 @@ InfoPage="Config;Control Panel"
 InfoPage="Config;Recycle Bin"
 InfoPage="Config;System Files"
 InfoPage="Config;System Folders"
-InfoPage="Config;Event Logs"
 InfoPage="Database;Database Software"
 InfoPage="Database;BDE Drivers"
 InfoPage="Database;ODBC Drivers"

.cbin/_include/ESETConfigs/eset-config-msp.xml

@@ -1,6 +1,31 @@
 <?xml version="1.0" encoding="utf-8"?>
 <ESET>
- <PRODUCT NAME="home" VERSION="11.2.49">
+ <PRODUCT NAME="home" VERSION="12.1.34">
+  <ITEM NAME="Settings">
+   <ITEM NAME="LiveGrid">
+    <NODE NAME="LiveGridEnabled" TYPE="number" VALUE="1" />
+    <NODE NAME="DynamicDefenseEnabled" TYPE="number" VALUE="0" />
+    <NODE NAME="SubmitStatistics" TYPE="number" VALUE="1" />
+    <NODE NAME="ContactEmail" TYPE="string" VALUE="" />
+    <NODE NAME="LoggingEnabled" TYPE="number" VALUE="0" />
+    <NODE NAME="SubmitManually" TYPE="number" VALUE="1" />
+    <NODE NAME="SubmitInfectedFiles" TYPE="number" VALUE="1" />
+    <NODE NAME="SubmitSuspiciousExecutables" TYPE="number" VALUE="1" />
+    <NODE NAME="SubmitSuspiciousArchives" TYPE="number" VALUE="1" />
+    <NODE NAME="SubmitSuspiciousScripts" TYPE="number" VALUE="1" />
+    <NODE NAME="SubmitSuspiciousOther" TYPE="number" VALUE="1" />
+    <NODE NAME="DeleteSuspiciousSamples" TYPE="number" VALUE="0" />
+    <NODE NAME="SubmitSuspiciousDocuments" TYPE="number" VALUE="0" />
+    <NODE NAME="DeleteSuspiciousDocumentSamples" TYPE="number" VALUE="1" />
+    <ITEM NAME="Exclusions" DELETE="1" />
+    <NODE NAME="DynamicDefenseThreshold" TYPE="number" VALUE="5A" />
+    <NODE NAME="DynamicDefenseAction" TYPE="number" VALUE="0" />
+    <NODE NAME="SampleSizeMax" TYPE="number" VALUE="40" />
+    <NODE NAME="SubmitStatisticsChosen" TYPE="number" VALUE="3" />
+    <NODE NAME="SubmitCrashReports" TYPE="number" VALUE="1" />
+    <NODE NAME="LiveGridFeedbackEnabled" TYPE="number" VALUE="1" />
+   </ITEM>
+  </ITEM>
   <ITEM NAME="gui">
    <ITEM NAME="UI_CONFIG">
     <NODE NAME="ShowSplash" TYPE="number" VALUE="0" />
@@ -11,7 +36,7 @@
     <NODE NAME="ShowDesktopAlert" TYPE="number" VALUE="0" />
     <NODE NAME="DesktopAlertDuration" TYPE="number" VALUE="A" />
     <NODE NAME="DesktopAlertTransparency" TYPE="number" VALUE="14" />
-    <NODE NAME="ShowAlertStatus" TYPE="number" VALUE="10000000" />
+    <NODE NAME="ShowAlertStatus" TYPE="number" VALUE="40000000" />
     <NODE NAME="CustomerCareNoSubmitConfirm" TYPE="number" VALUE="0" />
     <NODE NAME="PlaySound" TYPE="number" VALUE="1" />
     <NODE NAME="ShowSchedulerSystemTasks" TYPE="number" VALUE="0" />
@@ -125,6 +150,10 @@
       <NODE NAME="Show" TYPE="number" VALUE="1" />
       <NODE NAME="Send" TYPE="number" VALUE="1" />
      </ITEM>
+     <ITEM NAME="EpfwProtocolFilteringDisabled">
+      <NODE NAME="Show" TYPE="number" VALUE="1" />
+      <NODE NAME="Send" TYPE="number" VALUE="1" />
+     </ITEM>
      <ITEM NAME="EpfwProxyNonfunct">
       <NODE NAME="Show" TYPE="number" VALUE="1" />
       <NODE NAME="Send" TYPE="number" VALUE="1" />
@@ -145,10 +174,6 @@
       <NODE NAME="Show" TYPE="number" VALUE="1" />
       <NODE NAME="Send" TYPE="number" VALUE="1" />
      </ITEM>
-     <ITEM NAME="UpdaterActivationProcess">
-      <NODE NAME="Show" TYPE="number" VALUE="1" />
-      <NODE NAME="Send" TYPE="number" VALUE="1" />
-     </ITEM>
      <ITEM NAME="UpdaterVirusDbOutdatedConnectionError">
       <NODE NAME="Show" TYPE="number" VALUE="1" />
       <NODE NAME="Send" TYPE="number" VALUE="1" />
@@ -238,6 +263,7 @@
      </ITEM>
      <ITEM NAME="rules" DELETE="1" />
      <NODE NAME="eraAgentProtection" TYPE="number" VALUE="0" />
+     <NODE NAME="protectedService" TYPE="number" VALUE="1" />
      <NODE NAME="eiAgentProtection" TYPE="number" VALUE="0" />
     </ITEM>
    </ITEM>
@@ -255,12 +281,20 @@
      <NODE NAME="LogsEnabled" TYPE="number" VALUE="0" />
     </ITEM>
    </ITEM>
-   <ITEM NAME="01000006">
+   <ITEM NAME="01000007">
     <ITEM NAME="settings">
-     <ITEM NAME="Ekrn">
+     <NODE NAME="ParticipateInCeip" TYPE="number" VALUE="0" />
-      <NODE NAME="MecacOptionHandled" TYPE="number" VALUE="1" />
+     <NODE NAME="NotificationEnabled" TYPE="number" VALUE="1" />
+     <NODE NAME="SecurityReportDays" TYPE="number" VALUE="1E" />
+     <NODE NAME="AdvancedLoggingEnabled" TYPE="number" VALUE="0" />
+     <NODE NAME="CeipAlertWindowTimestamp" TYPE="number" VALUE="5CECC253" />
+     <NODE NAME="CeipAlertWindowShown" TYPE="number" VALUE="0" />
     </ITEM>
    </ITEM>
+   <ITEM NAME="01000008">
+    <ITEM NAME="settings">
+     <NODE NAME="AdvancedLoggingEnabled" TYPE="number" VALUE="0" />
+    </ITEM>
    </ITEM>
    <ITEM NAME="01000009">
     <ITEM NAME="settings">
@@ -269,10 +303,10 @@
      <NODE NAME="ConfigInterval" TYPE="number" VALUE="15180" />
      <NODE NAME="MessageInterval" TYPE="number" VALUE="15180" />
      <NODE NAME="DisplayTime" TYPE="number" VALUE="18" />
-     <NODE NAME="NextConfigTime" TYPE="number" VALUE="5B7B5698" />
+     <NODE NAME="NextConfigTime" TYPE="number" VALUE="5CEE13E1" />
-     <NODE NAME="NextMessageTime" TYPE="number" VALUE="5B7B56A7" />
+     <NODE NAME="NextMessageTime" TYPE="number" VALUE="5CEE13F0" />
-     <NODE NAME="AngryPoints" TYPE="number" VALUE="6C" />
+     <NODE NAME="AngryPoints" TYPE="number" VALUE="64" />
-     <NODE NAME="LastAngryPointsIncTime" TYPE="number" VALUE="5B79ED1A" />
+     <NODE NAME="LastAngryPointsIncTime" TYPE="number" VALUE="5CEC629A" />
      <NODE NAME="LastServerConnect" TYPE="number" VALUE="0" />
      <NODE NAME="LastCertTime" TYPE="number" VALUE="0" />
      <NODE NAME="LastPopupTime" TYPE="number" VALUE="0" />
@@ -335,6 +369,9 @@
     </ITEM>
    </ITEM>
    <ITEM NAME="01000105">
+    <ITEM NAME="Eamsi">
+     <NODE NAME="Enabled" TYPE="number" VALUE="1" />
+    </ITEM>
     <ITEM NAME="Settings">
      <NODE NAME="Enabled" TYPE="number" VALUE="1" />
     </ITEM>
@@ -394,28 +431,7 @@
        <NODE NAME="eAskIfRootCertIsUnknown" TYPE="number" VALUE="0" />
        <NODE NAME="eAskIfCertIsNotTrusted" TYPE="number" VALUE="1" />
        <NODE NAME="bAddRootCertToBrowsers" TYPE="number" VALUE="1" />
-       <ITEM NAME="stApplications" DELETE="1">
+       <ITEM NAME="stApplications" DELETE="1" />
-        <ITEM NAME="1">
-         <NODE NAME="strAppPath" TYPE="string" VALUE="C:\Program Files\Mozilla Firefox\pingsender.exe" />
-         <NODE NAME="eScanAction" TYPE="number" VALUE="0" />
-        </ITEM>
-        <ITEM NAME="2">
-         <NODE NAME="strAppPath" TYPE="string" VALUE="C:\Windows\System32\svchost.exe" />
-         <NODE NAME="eScanAction" TYPE="number" VALUE="0" />
-        </ITEM>
-        <ITEM NAME="3">
-         <NODE NAME="strAppPath" TYPE="string" VALUE="C:\Program Files\Mozilla Firefox\firefox.exe" />
-         <NODE NAME="eScanAction" TYPE="number" VALUE="0" />
-        </ITEM>
-        <ITEM NAME="4">
-         <NODE NAME="strAppPath" TYPE="string" VALUE="C:\Program Files\Windows Defender\MpCmdRun.exe" />
-         <NODE NAME="eScanAction" TYPE="number" VALUE="0" />
-        </ITEM>
-        <ITEM NAME="5">
-         <NODE NAME="strAppPath" TYPE="string" VALUE="C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" />
-         <NODE NAME="eScanAction" TYPE="number" VALUE="0" />
-        </ITEM>
-       </ITEM>
        <ITEM NAME="stCertificates" DELETE="1" />
       </ITEM>
       <ITEM NAME="stUrlLists" DELETE="1">
@@ -471,7 +487,6 @@
      </ITEM>
     </ITEM>
     <ITEM NAME="settings">
-     <NODE NAME="SmonEnabled" TYPE="number" VALUE="1" />
      <NODE NAME="SmonAutostart" TYPE="number" VALUE="1" />
      <NODE NAME="SpamSubjectPrefixFlag" TYPE="number" VALUE="1" />
      <NODE NAME="SpamSubjectPrefix" TYPE="string" VALUE="[SPAM]" />
@@ -507,59 +522,23 @@
       <ITEM NAME="1">
        <ITEM NAME="settings">
         <ITEM NAME="UPDATE_CFG">
-         <NODE NAME="UpdateMode" TYPE="number" VALUE="22" />
          <NODE NAME="UpdateUrl" TYPE="string" VALUE="" />
-         <NODE NAME="RepositoryUrl" TYPE="string" VALUE="" />
          <NODE NAME="UseProxy" TYPE="number" VALUE="2" />
          <NODE NAME="ProxyAddress" TYPE="string" VALUE="" />
          <NODE NAME="ProxyPort" TYPE="number" VALUE="C38" />
          <NODE NAME="ProxyUsername" TYPE="string" VALUE="" />
          <NODE NAME="ProxyPassword" TYPE="password" VALUE="" />
          <NODE NAME="ProxyFallback" TYPE="number" VALUE="1" />
-         <NODE NAME="LocalUserType" TYPE="number" VALUE="0" />
-         <NODE NAME="LocalUserUsername" TYPE="string" VALUE="" />
-         <NODE NAME="LocalUserPassword" TYPE="password" VALUE="" />
-         <NODE NAME="DisconnectLanAfterUpdate" TYPE="number" VALUE="0" />
          <NODE NAME="NotifyBeforeUpdate" TYPE="number" VALUE="0" />
          <NODE NAME="NotifyBeforeUpdateSize" TYPE="number" VALUE="0" />
-         <ITEM NAME="MirrorCfg">
-          <NODE NAME="MirrorEnabled" TYPE="number" VALUE="0" />
-          <NODE NAME="EnableHTTP" TYPE="number" VALUE="1" />
-          <NODE NAME="MirrorFolder" TYPE="string" VALUE="C:\ProgramData\ESET\ESET Security\mirror" />
-          <NODE NAME="Username" TYPE="string" VALUE="" />
-          <NODE NAME="Password" TYPE="password" VALUE="" />
-          <ITEM NAME="SelectedPCUs" DELETE="1" />
-          <ITEM NAME="HttpServerCfg">
-           <NODE NAME="HTTPPort" TYPE="number" VALUE="8AD" />
-           <NODE NAME="HTTPThreadNum" TYPE="number" VALUE="6" />
-           <NODE NAME="HTTPAuthorizationMethod" TYPE="number" VALUE="0" />
-           <NODE NAME="HTTPHost" TYPE="string" VALUE="" />
-           <NODE NAME="CertificateChainFile" TYPE="string" VALUE="" />
-           <NODE NAME="CertificateType" TYPE="number" VALUE="1" />
-           <NODE NAME="PrivateKeyFile" TYPE="string" VALUE="" />
-           <NODE NAME="PrivateKeyType" TYPE="number" VALUE="0" />
-          </ITEM>
-          <ITEM NAME="LanCfg">
-           <NODE NAME="LocalUserType" TYPE="number" VALUE="0" />
-           <NODE NAME="LocalUsername" TYPE="string" VALUE="" />
-           <NODE NAME="LocalPassword" TYPE="password" VALUE="" />
-           <NODE NAME="DisconnectLanAfterMirrorUpdate" TYPE="number" VALUE="0" />
-          </ITEM>
-          <ITEM NAME="PcuCfg">
-           <NODE NAME="MirrorMode" TYPE="number" VALUE="1" />
-          </ITEM>
-         </ITEM>
          <NODE NAME="ModulesType" TYPE="number" VALUE="0" />
-         <NODE NAME="DontShowNotification" TYPE="number" VALUE="1" />
          <NODE NAME="CheckForPCUUpdateDisabled" TYPE="number" VALUE="0" />
          <NODE NAME="CheckForOptionalPCU" TYPE="number" VALUE="0" />
          <NODE NAME="UpdateFromMirror" TYPE="number" VALUE="0" />
-         <NODE NAME="UpdateFromMirrorUsername" TYPE="string" VALUE="" />
-         <NODE NAME="UpdateFromMirrorPassword" TYPE="password" VALUE="" />
          <NODE NAME="UpdateApplication" TYPE="number" VALUE="1" />
          <NODE NAME="UseDevel" TYPE="number" VALUE="0" />
-         <NODE NAME="UpdateFromRemovableMedia" TYPE="number" VALUE="0" />
          <NODE NAME="PicoUpdates" TYPE="number" VALUE="1" />
+         <NODE NAME="DontShowNotification" TYPE="number" VALUE="1" />
         </ITEM>
        </ITEM>
        <NODE NAME="name" TYPE="string" VALUE="@My profile" />
@@ -568,24 +547,10 @@
      <NODE NAME="active" TYPE="string" VALUE="@My profile" />
     </ITEM>
     <ITEM NAME="settings">
-     <NODE NAME="Username" TYPE="string" VALUE="EAV-0232236324" />
-     <NODE NAME="Password" TYPE="password" VALUE="E9ak6erwk/IrZE2t0ch9dY8xXbw=" />
-     <NODE NAME="LegacyUsername" TYPE="string" VALUE="" />
-     <NODE NAME="LegacyPassword" TYPE="password" VALUE="" />
-     <NODE NAME="MaxVsdbAgeAuto" TYPE="number" VALUE="1" />
-     <NODE NAME="MaxVsdbAge" TYPE="number" VALUE="7" />
      <NODE NAME="BackupEnabled" TYPE="number" VALUE="1" />
      <NODE NAME="BackupInterval" TYPE="number" VALUE="2" />
      <NODE NAME="SnapshotCount" TYPE="number" VALUE="1" />
      <NODE NAME="EnableAdvancedLogging" TYPE="number" VALUE="0" />
-     <NODE NAME="UpdateServerGroupCurrent" TYPE="string" VALUE="" />
-     <ITEM NAME="AcceptedEulas" DELETE="1">
-      <ITEM NAME="1">
-       <NODE NAME="CollectionHash" TYPE="string" VALUE="04e494c8364ad21159d106d4abffe74e0af340cc" />
-       <NODE NAME="DocumentHash" TYPE="string" VALUE="72abe360108cdf184092a0c68bd32ac8dbacb185" />
-      </ITEM>
-     </ITEM>
-     <ITEM NAME="ReportedAppUpdateVersions" DELETE="1" />
     </ITEM>
    </ITEM>
    <ITEM NAME="01000600">
@@ -642,7 +607,7 @@
       <NODE NAME="CorporateInstallation" TYPE="number" VALUE="2" />
       <NODE NAME="ServerInstallation" TYPE="number" VALUE="2" />
       <NODE NAME="LockPassword" TYPE="number" VALUE="68DBAF89" />
-      <NODE NAME="LockPasswordPublicKey" TYPE="string" VALUE="" />
+      <NODE NAME="LockPasswordPublicKey" TYPE="string" VALUE="QXtOPbi0/UmNMnlwAdWVOTv0SlYDzXaYCfE43+vSyL0=" />
       <NODE NAME="IncomingEmailTagLevel" TYPE="number" VALUE="1" />
       <NODE NAME="IncomingEmailSubjectModify" TYPE="number" VALUE="1" />
       <NODE NAME="OutgoingEmailTagLevel" TYPE="number" VALUE="1" />
@@ -669,28 +634,6 @@
        <NODE NAME="FirstSendTimeIntervalA" TYPE="number" VALUE="5" />
        <NODE NAME="LastSendTimeIntervalB" TYPE="number" VALUE="14" />
       </ITEM>
-      <ITEM NAME="Cloud">
-       <NODE NAME="LiveGridEnabled" TYPE="number" VALUE="1" />
-       <NODE NAME="DynamicDefenseEnabled" TYPE="number" VALUE="0" />
-       <NODE NAME="SubmitStatistics" TYPE="number" VALUE="1" />
-       <NODE NAME="ContactEmail" TYPE="string" VALUE="" />
-       <NODE NAME="LoggingEnabled" TYPE="number" VALUE="0" />
-       <NODE NAME="SubmitInfectedFiles" TYPE="number" VALUE="1" />
-       <NODE NAME="SubmitSuspiciousExecutables" TYPE="number" VALUE="1" />
-       <NODE NAME="SubmitSuspiciousArchives" TYPE="number" VALUE="1" />
-       <NODE NAME="SubmitSuspiciousScripts" TYPE="number" VALUE="1" />
-       <NODE NAME="SubmitSuspiciousOther" TYPE="number" VALUE="1" />
-       <NODE NAME="DeleteSuspiciousSamples" TYPE="number" VALUE="0" />
-       <NODE NAME="SubmitSuspiciousDocuments" TYPE="number" VALUE="0" />
-       <NODE NAME="DeleteSuspiciousDocumentSamples" TYPE="number" VALUE="1" />
-       <ITEM NAME="Exclusions" DELETE="1" />
-       <NODE NAME="DynamicDefenseThreshold" TYPE="number" VALUE="5A" />
-       <NODE NAME="DynamicDefenseAction" TYPE="number" VALUE="0" />
-       <NODE NAME="SampleSizeMax" TYPE="number" VALUE="40" />
-       <NODE NAME="SubmitStatisticsChosen" TYPE="number" VALUE="2" />
-       <NODE NAME="SubmitCrashReports" TYPE="number" VALUE="1" />
-       <NODE NAME="LiveGridFeedbackEnabled" TYPE="number" VALUE="1" />
-      </ITEM>
      </ITEM>
      <ITEM NAME="DistPackage">
       <ITEM NAME="AppSettings">
@@ -729,14 +672,9 @@
       <NODE NAME="Password" TYPE="password" VALUE="" />
      </ITEM>
      <ITEM NAME="Ecmd">
-      <NODE NAME="Enabled" TYPE="number" VALUE="0" />
+      <NODE NAME="Enabled" TYPE="number" VALUE="1" />
       <NODE NAME="AuthType" TYPE="number" VALUE="2" />
      </ITEM>
-     <ITEM NAME="SecurityReport">
-      <NODE NAME="NotificationEnabled" TYPE="number" VALUE="1" />
-      <NODE NAME="SecurityReportDays" TYPE="number" VALUE="1E" />
-      <NODE NAME="LastNotificationTime" TYPE="number" VALUE="5B74A82B" />
-     </ITEM>
     </ITEM>
    </ITEM>
    <ITEM NAME="01000800">
@@ -768,6 +706,7 @@
     <ITEM NAME="settings">
      <ITEM NAME="general">
       <NODE NAME="Enabled" TYPE="number" VALUE="0" />
+      <NODE NAME="EnableETWLogging" TYPE="number" VALUE="0" />
      </ITEM>
      <ITEM NAME="rules" DELETE="1" />
      <ITEM NAME="groups" DELETE="1" />
@@ -784,14 +723,14 @@
   <ITEM NAME="runtime">
    <ITEM NAME="RUNTIME_CONFIG">
     <ITEM NAME="m_sOsVersion">
-     <NODE NAME="dwMajorVersion" TYPE="number" VALUE="6" />
+     <NODE NAME="dwMajorVersion" TYPE="number" VALUE="A" />
-     <NODE NAME="dwMinorVersion" TYPE="number" VALUE="1" />
+     <NODE NAME="dwMinorVersion" TYPE="number" VALUE="0" />
-     <NODE NAME="dwServicePack" TYPE="number" VALUE="1DB1" />
+     <NODE NAME="dwServicePack" TYPE="number" VALUE="47BA" />
     </ITEM>
     <ITEM NAME="m_sProductVersion">
-     <NODE NAME="dwMajorVersion" TYPE="number" VALUE="B" />
+     <NODE NAME="dwMajorVersion" TYPE="number" VALUE="C" />
-     <NODE NAME="dwMinorVersion" TYPE="number" VALUE="2" />
+     <NODE NAME="dwMinorVersion" TYPE="number" VALUE="1" />
-     <NODE NAME="dwBuildNumber" TYPE="number" VALUE="31" />
+     <NODE NAME="dwBuildNumber" TYPE="number" VALUE="22" />
      <NODE NAME="dwLocalizationNumber" TYPE="number" VALUE="0" />
     </ITEM>
     <ITEM NAME="m_PluginIDs" DELETE="1">
@@ -942,7 +881,7 @@
         <NODE NAME="MailEnable" TYPE="number" VALUE="0" />
         <NODE NAME="MemoryEnable" TYPE="number" VALUE="0" />
         <ITEM NAME="ExcludeExtensions" DELETE="1" />
-        <NODE NAME="CleanLevel" TYPE="number" VALUE="1" />
+        <NODE NAME="CleanLevel" TYPE="number" VALUE="2" />
         <NODE NAME="LogAllEnable" TYPE="number" VALUE="0" />
         <NODE NAME="ArchiveUseDefaults" TYPE="number" VALUE="1" />
         <NODE NAME="MaxArchiveLevel" TYPE="number" VALUE="0" />
@@ -1462,7 +1401,7 @@
         <NODE NAME="MailEnable" TYPE="number" VALUE="1" />
         <NODE NAME="MemoryEnable" TYPE="number" VALUE="1" />
         <ITEM NAME="ExcludeExtensions" DELETE="1" />
-        <NODE NAME="CleanLevel" TYPE="number" VALUE="1" />
+        <NODE NAME="CleanLevel" TYPE="number" VALUE="2" />
         <NODE NAME="LogAllEnable" TYPE="number" VALUE="0" />
         <NODE NAME="ArchiveUseDefaults" TYPE="number" VALUE="1" />
         <NODE NAME="MaxArchiveLevel" TYPE="number" VALUE="0" />
@@ -1633,36 +1572,6 @@
      <NODE NAME="Params" TYPE="string" VALUE="&lt;?xml version=&quot;1.0&quot; encoding=&quot;utf-8&quot;?&gt;&lt;PARAMS&gt;&lt;SCHEDULED_TASK PLUGIN=&quot;1000100&quot; ACTION=&quot;0&quot; DESCRIPTION=&quot;&quot;&gt;&lt;DATA&gt;&lt;NODE NAME=&quot;FIRST_SCAN&quot; VALUE=&quot;1&quot; TYPE=&quot;DWORD&quot; /&gt;&lt;NODE NAME=&quot;TARGETS&quot; VALUE=&quot;${DriveSystem}&quot; TYPE=&quot;STRING&quot; /&gt;&lt;/DATA&gt;&lt;/SCHEDULED_TASK&gt;&lt;/PARAMS&gt;" />
     </ITEM>
    </ITEM>
-   <ITEM NAME="exec" DELETE="1">
-    <ITEM NAME="1">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000001" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="5B74A73B" />
-    </ITEM>
-    <ITEM NAME="2">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000100" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="5B7A0547" />
-    </ITEM>
-    <ITEM NAME="3">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000101" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="0" />
-    </ITEM>
-    <ITEM NAME="4">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000102" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="0" />
-    </ITEM>
-    <ITEM NAME="5">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000003" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="5B74B05C" />
-    </ITEM>
-    <ITEM NAME="6">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000004" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="5B74B109" />
-    </ITEM>
-    <ITEM NAME="7">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000005" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="0" />
-    </ITEM>
-   </ITEM>
   </ITEM>
  </PRODUCT>
 </ESET>

.cbin/_include/ESETConfigs/eset-config.xml

@@ -1,6 +1,31 @@
 <?xml version="1.0" encoding="utf-8"?>
 <ESET>
- <PRODUCT NAME="home" VERSION="11.2.49">
+ <PRODUCT NAME="home" VERSION="12.1.34">
+  <ITEM NAME="Settings">
+   <ITEM NAME="LiveGrid">
+    <NODE NAME="LiveGridEnabled" TYPE="number" VALUE="1" />
+    <NODE NAME="DynamicDefenseEnabled" TYPE="number" VALUE="0" />
+    <NODE NAME="SubmitStatistics" TYPE="number" VALUE="1" />
+    <NODE NAME="ContactEmail" TYPE="string" VALUE="" />
+    <NODE NAME="LoggingEnabled" TYPE="number" VALUE="0" />
+    <NODE NAME="SubmitManually" TYPE="number" VALUE="1" />
+    <NODE NAME="SubmitInfectedFiles" TYPE="number" VALUE="1" />
+    <NODE NAME="SubmitSuspiciousExecutables" TYPE="number" VALUE="1" />
+    <NODE NAME="SubmitSuspiciousArchives" TYPE="number" VALUE="1" />
+    <NODE NAME="SubmitSuspiciousScripts" TYPE="number" VALUE="1" />
+    <NODE NAME="SubmitSuspiciousOther" TYPE="number" VALUE="1" />
+    <NODE NAME="DeleteSuspiciousSamples" TYPE="number" VALUE="0" />
+    <NODE NAME="SubmitSuspiciousDocuments" TYPE="number" VALUE="0" />
+    <NODE NAME="DeleteSuspiciousDocumentSamples" TYPE="number" VALUE="1" />
+    <ITEM NAME="Exclusions" DELETE="1" />
+    <NODE NAME="DynamicDefenseThreshold" TYPE="number" VALUE="5A" />
+    <NODE NAME="DynamicDefenseAction" TYPE="number" VALUE="0" />
+    <NODE NAME="SampleSizeMax" TYPE="number" VALUE="40" />
+    <NODE NAME="SubmitStatisticsChosen" TYPE="number" VALUE="3" />
+    <NODE NAME="SubmitCrashReports" TYPE="number" VALUE="1" />
+    <NODE NAME="LiveGridFeedbackEnabled" TYPE="number" VALUE="1" />
+   </ITEM>
+  </ITEM>
   <ITEM NAME="gui">
    <ITEM NAME="UI_CONFIG">
     <NODE NAME="ShowSplash" TYPE="number" VALUE="0" />
@@ -11,7 +36,7 @@
     <NODE NAME="ShowDesktopAlert" TYPE="number" VALUE="0" />
     <NODE NAME="DesktopAlertDuration" TYPE="number" VALUE="A" />
     <NODE NAME="DesktopAlertTransparency" TYPE="number" VALUE="14" />
-    <NODE NAME="ShowAlertStatus" TYPE="number" VALUE="10000000" />
+    <NODE NAME="ShowAlertStatus" TYPE="number" VALUE="40000000" />
     <NODE NAME="CustomerCareNoSubmitConfirm" TYPE="number" VALUE="0" />
     <NODE NAME="PlaySound" TYPE="number" VALUE="1" />
     <NODE NAME="ShowSchedulerSystemTasks" TYPE="number" VALUE="0" />
@@ -125,6 +150,10 @@
       <NODE NAME="Show" TYPE="number" VALUE="1" />
       <NODE NAME="Send" TYPE="number" VALUE="1" />
      </ITEM>
+     <ITEM NAME="EpfwProtocolFilteringDisabled">
+      <NODE NAME="Show" TYPE="number" VALUE="1" />
+      <NODE NAME="Send" TYPE="number" VALUE="1" />
+     </ITEM>
      <ITEM NAME="EpfwProxyNonfunct">
       <NODE NAME="Show" TYPE="number" VALUE="1" />
       <NODE NAME="Send" TYPE="number" VALUE="1" />
@@ -145,10 +174,6 @@
       <NODE NAME="Show" TYPE="number" VALUE="1" />
       <NODE NAME="Send" TYPE="number" VALUE="1" />
      </ITEM>
-     <ITEM NAME="UpdaterActivationProcess">
-      <NODE NAME="Show" TYPE="number" VALUE="1" />
-      <NODE NAME="Send" TYPE="number" VALUE="1" />
-     </ITEM>
      <ITEM NAME="UpdaterVirusDbOutdatedConnectionError">
       <NODE NAME="Show" TYPE="number" VALUE="1" />
       <NODE NAME="Send" TYPE="number" VALUE="1" />
@@ -238,6 +263,7 @@
      </ITEM>
      <ITEM NAME="rules" DELETE="1" />
      <NODE NAME="eraAgentProtection" TYPE="number" VALUE="0" />
+     <NODE NAME="protectedService" TYPE="number" VALUE="1" />
      <NODE NAME="eiAgentProtection" TYPE="number" VALUE="0" />
     </ITEM>
    </ITEM>
@@ -255,12 +281,20 @@
      <NODE NAME="LogsEnabled" TYPE="number" VALUE="0" />
     </ITEM>
    </ITEM>
-   <ITEM NAME="01000006">
+   <ITEM NAME="01000007">
     <ITEM NAME="settings">
-     <ITEM NAME="Ekrn">
+     <NODE NAME="ParticipateInCeip" TYPE="number" VALUE="0" />
-      <NODE NAME="MecacOptionHandled" TYPE="number" VALUE="1" />
+     <NODE NAME="NotificationEnabled" TYPE="number" VALUE="1" />
+     <NODE NAME="SecurityReportDays" TYPE="number" VALUE="1E" />
+     <NODE NAME="AdvancedLoggingEnabled" TYPE="number" VALUE="0" />
+     <NODE NAME="CeipAlertWindowTimestamp" TYPE="number" VALUE="5CECC253" />
+     <NODE NAME="CeipAlertWindowShown" TYPE="number" VALUE="0" />
     </ITEM>
    </ITEM>
+   <ITEM NAME="01000008">
+    <ITEM NAME="settings">
+     <NODE NAME="AdvancedLoggingEnabled" TYPE="number" VALUE="0" />
+    </ITEM>
    </ITEM>
    <ITEM NAME="01000009">
     <ITEM NAME="settings">
@@ -269,10 +303,10 @@
      <NODE NAME="ConfigInterval" TYPE="number" VALUE="15180" />
      <NODE NAME="MessageInterval" TYPE="number" VALUE="15180" />
      <NODE NAME="DisplayTime" TYPE="number" VALUE="18" />
-     <NODE NAME="NextConfigTime" TYPE="number" VALUE="5B7B5698" />
+     <NODE NAME="NextConfigTime" TYPE="number" VALUE="5CEE13E1" />
-     <NODE NAME="NextMessageTime" TYPE="number" VALUE="5B7B56A7" />
+     <NODE NAME="NextMessageTime" TYPE="number" VALUE="5CEE13F0" />
-     <NODE NAME="AngryPoints" TYPE="number" VALUE="6C" />
+     <NODE NAME="AngryPoints" TYPE="number" VALUE="64" />
-     <NODE NAME="LastAngryPointsIncTime" TYPE="number" VALUE="5B79ED1A" />
+     <NODE NAME="LastAngryPointsIncTime" TYPE="number" VALUE="5CEC629A" />
      <NODE NAME="LastServerConnect" TYPE="number" VALUE="0" />
      <NODE NAME="LastCertTime" TYPE="number" VALUE="0" />
      <NODE NAME="LastPopupTime" TYPE="number" VALUE="0" />
@@ -335,6 +369,9 @@
     </ITEM>
    </ITEM>
    <ITEM NAME="01000105">
+    <ITEM NAME="Eamsi">
+     <NODE NAME="Enabled" TYPE="number" VALUE="1" />
+    </ITEM>
     <ITEM NAME="Settings">
      <NODE NAME="Enabled" TYPE="number" VALUE="1" />
     </ITEM>
@@ -394,28 +431,7 @@
        <NODE NAME="eAskIfRootCertIsUnknown" TYPE="number" VALUE="0" />
        <NODE NAME="eAskIfCertIsNotTrusted" TYPE="number" VALUE="1" />
        <NODE NAME="bAddRootCertToBrowsers" TYPE="number" VALUE="1" />
-       <ITEM NAME="stApplications" DELETE="1">
+       <ITEM NAME="stApplications" DELETE="1" />
-        <ITEM NAME="1">
-         <NODE NAME="strAppPath" TYPE="string" VALUE="C:\Program Files\Mozilla Firefox\pingsender.exe" />
-         <NODE NAME="eScanAction" TYPE="number" VALUE="0" />
-        </ITEM>
-        <ITEM NAME="2">
-         <NODE NAME="strAppPath" TYPE="string" VALUE="C:\Windows\System32\svchost.exe" />
-         <NODE NAME="eScanAction" TYPE="number" VALUE="0" />
-        </ITEM>
-        <ITEM NAME="3">
-         <NODE NAME="strAppPath" TYPE="string" VALUE="C:\Program Files\Mozilla Firefox\firefox.exe" />
-         <NODE NAME="eScanAction" TYPE="number" VALUE="0" />
-        </ITEM>
-        <ITEM NAME="4">
-         <NODE NAME="strAppPath" TYPE="string" VALUE="C:\Program Files\Windows Defender\MpCmdRun.exe" />
-         <NODE NAME="eScanAction" TYPE="number" VALUE="0" />
-        </ITEM>
-        <ITEM NAME="5">
-         <NODE NAME="strAppPath" TYPE="string" VALUE="C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" />
-         <NODE NAME="eScanAction" TYPE="number" VALUE="0" />
-        </ITEM>
-       </ITEM>
        <ITEM NAME="stCertificates" DELETE="1" />
       </ITEM>
       <ITEM NAME="stUrlLists" DELETE="1">
@@ -471,7 +487,6 @@
      </ITEM>
     </ITEM>
     <ITEM NAME="settings">
-     <NODE NAME="SmonEnabled" TYPE="number" VALUE="1" />
      <NODE NAME="SmonAutostart" TYPE="number" VALUE="1" />
      <NODE NAME="SpamSubjectPrefixFlag" TYPE="number" VALUE="1" />
      <NODE NAME="SpamSubjectPrefix" TYPE="string" VALUE="[SPAM]" />
@@ -507,59 +522,23 @@
       <ITEM NAME="1">
        <ITEM NAME="settings">
         <ITEM NAME="UPDATE_CFG">
-         <NODE NAME="UpdateMode" TYPE="number" VALUE="22" />
          <NODE NAME="UpdateUrl" TYPE="string" VALUE="" />
-         <NODE NAME="RepositoryUrl" TYPE="string" VALUE="" />
          <NODE NAME="UseProxy" TYPE="number" VALUE="2" />
          <NODE NAME="ProxyAddress" TYPE="string" VALUE="" />
          <NODE NAME="ProxyPort" TYPE="number" VALUE="C38" />
          <NODE NAME="ProxyUsername" TYPE="string" VALUE="" />
          <NODE NAME="ProxyPassword" TYPE="password" VALUE="" />
          <NODE NAME="ProxyFallback" TYPE="number" VALUE="1" />
-         <NODE NAME="LocalUserType" TYPE="number" VALUE="0" />
-         <NODE NAME="LocalUserUsername" TYPE="string" VALUE="" />
-         <NODE NAME="LocalUserPassword" TYPE="password" VALUE="" />
-         <NODE NAME="DisconnectLanAfterUpdate" TYPE="number" VALUE="0" />
          <NODE NAME="NotifyBeforeUpdate" TYPE="number" VALUE="0" />
          <NODE NAME="NotifyBeforeUpdateSize" TYPE="number" VALUE="0" />
-         <ITEM NAME="MirrorCfg">
-          <NODE NAME="MirrorEnabled" TYPE="number" VALUE="0" />
-          <NODE NAME="EnableHTTP" TYPE="number" VALUE="1" />
-          <NODE NAME="MirrorFolder" TYPE="string" VALUE="C:\ProgramData\ESET\ESET Security\mirror" />
-          <NODE NAME="Username" TYPE="string" VALUE="" />
-          <NODE NAME="Password" TYPE="password" VALUE="" />
-          <ITEM NAME="SelectedPCUs" DELETE="1" />
-          <ITEM NAME="HttpServerCfg">
-           <NODE NAME="HTTPPort" TYPE="number" VALUE="8AD" />
-           <NODE NAME="HTTPThreadNum" TYPE="number" VALUE="6" />
-           <NODE NAME="HTTPAuthorizationMethod" TYPE="number" VALUE="0" />
-           <NODE NAME="HTTPHost" TYPE="string" VALUE="" />
-           <NODE NAME="CertificateChainFile" TYPE="string" VALUE="" />
-           <NODE NAME="CertificateType" TYPE="number" VALUE="1" />
-           <NODE NAME="PrivateKeyFile" TYPE="string" VALUE="" />
-           <NODE NAME="PrivateKeyType" TYPE="number" VALUE="0" />
-          </ITEM>
-          <ITEM NAME="LanCfg">
-           <NODE NAME="LocalUserType" TYPE="number" VALUE="0" />
-           <NODE NAME="LocalUsername" TYPE="string" VALUE="" />
-           <NODE NAME="LocalPassword" TYPE="password" VALUE="" />
-           <NODE NAME="DisconnectLanAfterMirrorUpdate" TYPE="number" VALUE="0" />
-          </ITEM>
-          <ITEM NAME="PcuCfg">
-           <NODE NAME="MirrorMode" TYPE="number" VALUE="1" />
-          </ITEM>
-         </ITEM>
          <NODE NAME="ModulesType" TYPE="number" VALUE="0" />
-         <NODE NAME="DontShowNotification" TYPE="number" VALUE="1" />
          <NODE NAME="CheckForPCUUpdateDisabled" TYPE="number" VALUE="0" />
          <NODE NAME="CheckForOptionalPCU" TYPE="number" VALUE="0" />
          <NODE NAME="UpdateFromMirror" TYPE="number" VALUE="0" />
-         <NODE NAME="UpdateFromMirrorUsername" TYPE="string" VALUE="" />
-         <NODE NAME="UpdateFromMirrorPassword" TYPE="password" VALUE="" />
          <NODE NAME="UpdateApplication" TYPE="number" VALUE="1" />
          <NODE NAME="UseDevel" TYPE="number" VALUE="0" />
-         <NODE NAME="UpdateFromRemovableMedia" TYPE="number" VALUE="0" />
          <NODE NAME="PicoUpdates" TYPE="number" VALUE="1" />
+         <NODE NAME="DontShowNotification" TYPE="number" VALUE="1" />
         </ITEM>
        </ITEM>
        <NODE NAME="name" TYPE="string" VALUE="@My profile" />
@@ -568,24 +547,10 @@
      <NODE NAME="active" TYPE="string" VALUE="@My profile" />
     </ITEM>
     <ITEM NAME="settings">
-     <NODE NAME="Username" TYPE="string" VALUE="EAV-0232236324" />
-     <NODE NAME="Password" TYPE="password" VALUE="E9ak6erwk/IrZE2t0ch9dY8xXbw=" />
-     <NODE NAME="LegacyUsername" TYPE="string" VALUE="" />
-     <NODE NAME="LegacyPassword" TYPE="password" VALUE="" />
-     <NODE NAME="MaxVsdbAgeAuto" TYPE="number" VALUE="1" />
-     <NODE NAME="MaxVsdbAge" TYPE="number" VALUE="7" />
      <NODE NAME="BackupEnabled" TYPE="number" VALUE="1" />
      <NODE NAME="BackupInterval" TYPE="number" VALUE="2" />
      <NODE NAME="SnapshotCount" TYPE="number" VALUE="1" />
      <NODE NAME="EnableAdvancedLogging" TYPE="number" VALUE="0" />
-     <NODE NAME="UpdateServerGroupCurrent" TYPE="string" VALUE="" />
-     <ITEM NAME="AcceptedEulas" DELETE="1">
-      <ITEM NAME="1">
-       <NODE NAME="CollectionHash" TYPE="string" VALUE="04e494c8364ad21159d106d4abffe74e0af340cc" />
-       <NODE NAME="DocumentHash" TYPE="string" VALUE="72abe360108cdf184092a0c68bd32ac8dbacb185" />
-      </ITEM>
-     </ITEM>
-     <ITEM NAME="ReportedAppUpdateVersions" DELETE="1" />
     </ITEM>
    </ITEM>
    <ITEM NAME="01000600">
@@ -596,8 +561,8 @@
       <NODE NAME="WUWarningLevel" TYPE="number" VALUE="0" />
       <NODE NAME="AntistealthEnabled" TYPE="number" VALUE="1" />
       <NODE NAME="AntiphishEnabled" TYPE="number" VALUE="1" />
-      <NODE NAME="ScanUnwantedApp" TYPE="number" VALUE="1" />
+      <NODE NAME="ScanUnwantedApp" TYPE="number" VALUE="0" />
-      <NODE NAME="ScanUnsafeApp" TYPE="number" VALUE="1" />
+      <NODE NAME="ScanUnsafeApp" TYPE="number" VALUE="0" />
       <NODE NAME="ScanSuspApp" TYPE="number" VALUE="1" />
       <NODE NAME="AutoDeleteLogs" TYPE="number" VALUE="1" />
       <NODE NAME="LogsLifetime" TYPE="number" VALUE="5A" />
@@ -669,28 +634,6 @@
        <NODE NAME="FirstSendTimeIntervalA" TYPE="number" VALUE="5" />
        <NODE NAME="LastSendTimeIntervalB" TYPE="number" VALUE="14" />
       </ITEM>
-      <ITEM NAME="Cloud">
-       <NODE NAME="LiveGridEnabled" TYPE="number" VALUE="1" />
-       <NODE NAME="DynamicDefenseEnabled" TYPE="number" VALUE="0" />
-       <NODE NAME="SubmitStatistics" TYPE="number" VALUE="1" />
-       <NODE NAME="ContactEmail" TYPE="string" VALUE="" />
-       <NODE NAME="LoggingEnabled" TYPE="number" VALUE="0" />
-       <NODE NAME="SubmitInfectedFiles" TYPE="number" VALUE="1" />
-       <NODE NAME="SubmitSuspiciousExecutables" TYPE="number" VALUE="1" />
-       <NODE NAME="SubmitSuspiciousArchives" TYPE="number" VALUE="1" />
-       <NODE NAME="SubmitSuspiciousScripts" TYPE="number" VALUE="1" />
-       <NODE NAME="SubmitSuspiciousOther" TYPE="number" VALUE="1" />
-       <NODE NAME="DeleteSuspiciousSamples" TYPE="number" VALUE="0" />
-       <NODE NAME="SubmitSuspiciousDocuments" TYPE="number" VALUE="0" />
-       <NODE NAME="DeleteSuspiciousDocumentSamples" TYPE="number" VALUE="1" />
-       <ITEM NAME="Exclusions" DELETE="1" />
-       <NODE NAME="DynamicDefenseThreshold" TYPE="number" VALUE="5A" />
-       <NODE NAME="DynamicDefenseAction" TYPE="number" VALUE="0" />
-       <NODE NAME="SampleSizeMax" TYPE="number" VALUE="40" />
-       <NODE NAME="SubmitStatisticsChosen" TYPE="number" VALUE="2" />
-       <NODE NAME="SubmitCrashReports" TYPE="number" VALUE="1" />
-       <NODE NAME="LiveGridFeedbackEnabled" TYPE="number" VALUE="1" />
-      </ITEM>
      </ITEM>
      <ITEM NAME="DistPackage">
       <ITEM NAME="AppSettings">
@@ -732,11 +675,6 @@
       <NODE NAME="Enabled" TYPE="number" VALUE="0" />
       <NODE NAME="AuthType" TYPE="number" VALUE="2" />
      </ITEM>
-     <ITEM NAME="SecurityReport">
-      <NODE NAME="NotificationEnabled" TYPE="number" VALUE="1" />
-      <NODE NAME="SecurityReportDays" TYPE="number" VALUE="1E" />
-      <NODE NAME="LastNotificationTime" TYPE="number" VALUE="5B74A82B" />
-     </ITEM>
     </ITEM>
    </ITEM>
    <ITEM NAME="01000800">
@@ -768,6 +706,7 @@
     <ITEM NAME="settings">
      <ITEM NAME="general">
       <NODE NAME="Enabled" TYPE="number" VALUE="0" />
+      <NODE NAME="EnableETWLogging" TYPE="number" VALUE="0" />
      </ITEM>
      <ITEM NAME="rules" DELETE="1" />
      <ITEM NAME="groups" DELETE="1" />
@@ -784,14 +723,14 @@
   <ITEM NAME="runtime">
    <ITEM NAME="RUNTIME_CONFIG">
     <ITEM NAME="m_sOsVersion">
-     <NODE NAME="dwMajorVersion" TYPE="number" VALUE="6" />
+     <NODE NAME="dwMajorVersion" TYPE="number" VALUE="A" />
-     <NODE NAME="dwMinorVersion" TYPE="number" VALUE="1" />
+     <NODE NAME="dwMinorVersion" TYPE="number" VALUE="0" />
-     <NODE NAME="dwServicePack" TYPE="number" VALUE="1DB1" />
+     <NODE NAME="dwServicePack" TYPE="number" VALUE="47BA" />
     </ITEM>
     <ITEM NAME="m_sProductVersion">
-     <NODE NAME="dwMajorVersion" TYPE="number" VALUE="B" />
+     <NODE NAME="dwMajorVersion" TYPE="number" VALUE="C" />
-     <NODE NAME="dwMinorVersion" TYPE="number" VALUE="2" />
+     <NODE NAME="dwMinorVersion" TYPE="number" VALUE="1" />
-     <NODE NAME="dwBuildNumber" TYPE="number" VALUE="31" />
+     <NODE NAME="dwBuildNumber" TYPE="number" VALUE="22" />
      <NODE NAME="dwLocalizationNumber" TYPE="number" VALUE="0" />
     </ITEM>
     <ITEM NAME="m_PluginIDs" DELETE="1">
@@ -942,7 +881,7 @@
         <NODE NAME="MailEnable" TYPE="number" VALUE="0" />
         <NODE NAME="MemoryEnable" TYPE="number" VALUE="0" />
         <ITEM NAME="ExcludeExtensions" DELETE="1" />
-        <NODE NAME="CleanLevel" TYPE="number" VALUE="1" />
+        <NODE NAME="CleanLevel" TYPE="number" VALUE="2" />
         <NODE NAME="LogAllEnable" TYPE="number" VALUE="0" />
         <NODE NAME="ArchiveUseDefaults" TYPE="number" VALUE="1" />
         <NODE NAME="MaxArchiveLevel" TYPE="number" VALUE="0" />
@@ -1462,7 +1401,7 @@
         <NODE NAME="MailEnable" TYPE="number" VALUE="1" />
         <NODE NAME="MemoryEnable" TYPE="number" VALUE="1" />
         <ITEM NAME="ExcludeExtensions" DELETE="1" />
-        <NODE NAME="CleanLevel" TYPE="number" VALUE="1" />
+        <NODE NAME="CleanLevel" TYPE="number" VALUE="2" />
         <NODE NAME="LogAllEnable" TYPE="number" VALUE="0" />
         <NODE NAME="ArchiveUseDefaults" TYPE="number" VALUE="1" />
         <NODE NAME="MaxArchiveLevel" TYPE="number" VALUE="0" />
@@ -1633,36 +1572,6 @@
      <NODE NAME="Params" TYPE="string" VALUE="&lt;?xml version=&quot;1.0&quot; encoding=&quot;utf-8&quot;?&gt;&lt;PARAMS&gt;&lt;SCHEDULED_TASK PLUGIN=&quot;1000100&quot; ACTION=&quot;0&quot; DESCRIPTION=&quot;&quot;&gt;&lt;DATA&gt;&lt;NODE NAME=&quot;FIRST_SCAN&quot; VALUE=&quot;1&quot; TYPE=&quot;DWORD&quot; /&gt;&lt;NODE NAME=&quot;TARGETS&quot; VALUE=&quot;${DriveSystem}&quot; TYPE=&quot;STRING&quot; /&gt;&lt;/DATA&gt;&lt;/SCHEDULED_TASK&gt;&lt;/PARAMS&gt;" />
     </ITEM>
    </ITEM>
-   <ITEM NAME="exec" DELETE="1">
-    <ITEM NAME="1">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000001" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="5B74A73B" />
-    </ITEM>
-    <ITEM NAME="2">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000100" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="5B7A0547" />
-    </ITEM>
-    <ITEM NAME="3">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000101" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="0" />
-    </ITEM>
-    <ITEM NAME="4">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000102" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="0" />
-    </ITEM>
-    <ITEM NAME="5">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000003" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="5B74B05C" />
-    </ITEM>
-    <ITEM NAME="6">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000004" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="5B74B109" />
-    </ITEM>
-    <ITEM NAME="7">
-     <NODE NAME="Guid" TYPE="string" VALUE="ffffffff-ffff-ffff-ffff-ffff80000005" />
-     <NODE NAME="LastExec" TYPE="number" VALUE="0" />
-    </ITEM>
-   </ITEM>
   </ITEM>
  </PRODUCT>
 </ESET>

.linux_items/include/EFI/boot/refind.conf

@@ -19,6 +19,7 @@ menuentry "MemTest86" {
     icon /EFI/boot/icons/wk_memtest.png
     loader /EFI/memtest86/memtestx64.efi
 }
+
 menuentry "Linux" {
     icon /EFI/boot/icons/wk_arch.png
     loader /arch/boot/x86_64/vmlinuz
@@ -26,30 +27,42 @@ menuentry "Linux" {
     initrd /arch/boot/amd_ucode.img
     initrd /arch/boot/x86_64/archiso.img
     options "archisobasedir=arch archisolabel=%ARCHISO_LABEL% copytoram loglevel=3"
-    submenuentry "Linux (i3)" {
-        add_options "i3"
-    }
     submenuentry "Linux (CLI)" {
-        add_options "loglevel=4 nomodeset nox"
+        add_options "nox"
     }
+    #UFD-MINIMAL#submenuentry "Linux (Minimal)" {
+    #UFD-MINIMAL#    loader /arch_minimal/vmlinuz
+    #UFD-MINIMAL#    initrd
+    #UFD-MINIMAL#    initrd /arch/boot/intel_ucode.img
+    #UFD-MINIMAL#    initrd /arch/boot/amd_ucode.img
+    #UFD-MINIMAL#    initrd /arch_minimal/archiso.img
+    #UFD-MINIMAL#    options
+    #UFD-MINIMAL#    options "archisobasedir=arch_minimal archisolabel=%ARCHISO_LABEL% copytoram loglevel=3"
+    #UFD-MINIMAL#}
 }
+
 #UFD-WINPE#menuentry "WindowsPE" {
 #UFD-WINPE#    ostype windows
 #UFD-WINPE#    icon /EFI/boot/icons/wk_win.png
 #UFD-WINPE#    loader /EFI/microsoft/bootx64.efi
 #UFD-WINPE#}
-#UFD#menuentry "ESET SysRescue Live" {
+
-#UFD#    icon /EFI/boot/icons/1201_eset.png
+#UFD-ESET#menuentry "ESET SysRescue Live" {
-#UFD#    loader /EFI/ESET/grubx64.efi
+#UFD-ESET#    icon /EFI/boot/icons/1201_eset.png
-#UFD#}
+#UFD-ESET#    loader /EFI/ESET/grubx64.efi
-#UFD#menuentry "HDClone" {
+#UFD-ESET#}
-#UFD#    icon /EFI/boot/icons/1201_hdclone.png
+
-#UFD#    loader /EFI/HDClone/bootx64.efi
+#UFD-HDCLONE#menuentry "HDClone" {
-#UFD#}
+#UFD-HDCLONE#    icon /EFI/boot/icons/1201_hdclone.png
-#UFD#menuentry "Mac dGPU Disable Tool" {
+#UFD-HDCLONE#    loader /EFI/HDClone/bootx64.efi
-#UFD#    icon /EFI/boot/icons/1201_mac-dgpu.png
+#UFD-HDCLONE#}
-#UFD#    loader /dgpu/boot/x86_64/vmlinuz
+
-#UFD#    initrd /dgpu/boot/intel_ucode.img
+#UFD-DGPU#menuentry "Mac dGPU Disable Tool" {
-#UFD#    initrd /dgpu/boot/x86_64/archiso.img
+#UFD-DGPU#    icon /EFI/boot/icons/dgpu.png
-#UFD#    options "archisobasedir=dgpu archisolabel=1201_UFD nomodeset"
+#UFD-DGPU#    loader /dgpu/vmlinuz
-#UFD#}
+#UFD-DGPU#    initrd /arch/boot/intel_ucode.img
+#UFD-DGPU#    initrd /arch/boot/amd_ucode.img
+#UFD-DGPU#    initrd /dgpu/archiso.img
+#UFD-DGPU#    options "archisobasedir=dgpu archisolabel=%ARCHISO_LABEL% nomodeset"
+#UFD-DGPU#}
+

.linux_items/include/airootfs/etc/adjtime

@@ -0,0 +1,3 @@
+0.0 0 0
+0
+LOCAL

.linux_items/include/airootfs/etc/skel/.aliases

@@ -34,5 +34,5 @@ alias srsz='sudo rsync -avhzPS --stats --exclude-from="$HOME/.rsync_exclusions"'
 alias testdisk='sudo testdisk'
 alias umount='sudo umount'
 alias unmount='sudo umount'
-alias wkclone='sudo ddrescue-tui clone'
+alias wkclone='ddrescue-tui clone'
-alias wkimage='sudo ddrescue-tui image'
+alias wkimage='ddrescue-tui image'

.linux_items/include/airootfs/etc/skel/.tmux.conf

@@ -1,5 +1,5 @@
 set -g status off
-set -g pane-active-border-fg white
+set -g pane-active-border-style fg=white
 
 # Window names
 set -g set-titles on

.linux_items/include/airootfs/etc/skel/.update_network

@@ -1,23 +1,22 @@
-## .update_network ##
 #!/bin/env bash
 #
-## Connect to network and update hostname
+## Setup network and update hostname
 
-# Connect
+# Wait for WiFi
-connect-to-network
+sleep 1s
-sleep 2s
 
+# Set hostname
 IP="$(ip a show scope global \
   | grep inet \
   | head -1 \
   | sed -r 's#.*inet ([0-9]+.[0-9]+.[0-9]+.[0-9]+.)/.*#\1#')"
-HOSTNAME="$(dig +noall +answer +short -x "$IP" \
+if [[ "${IP:+x}" ]]; then
+  NEW_HOSTNAME="$(dig +noall +answer +short -x "$IP" \
     | grep -v ';' \
     | head -1 \
     | sed 's/\.$//')"
-
+fi
-# Set hostname
+if [[ "${NEW_HOSTNAME:+x}" ]]; then
-if [[ "${HOSTNAME:+x}" ]]; then
+  sudo hostnamectl set-hostname "${NEW_HOSTNAME}"
-  sudo hostnamectl set-hostname "${HOSTNAME}"
 fi
 

.linux_items/include/syslinux/wk_head.cfg

@@ -1,7 +1,7 @@
 SERIAL 0 38400
 UI boot/syslinux/vesamenu.c32
 MENU TITLE _______
-MENU BACKGROUND syslinux.png
+MENU BACKGROUND syslinux.jpg
 
 MENU WIDTH 80
 MENU MARGIN 10

.linux_items/include/syslinux/wk_pxe.cfg

@@ -1,5 +1,5 @@
 INCLUDE boot/syslinux/wk_head.cfg
-MENU BACKGROUND pxelinux.png
+MENU BACKGROUND pxelinux.jpg
 
 INCLUDE boot/syslinux/wk_pxe_linux.cfg
 #UFD-WINPE#INCLUDE boot/syslinux/wk_pxe_winpe.cfg

.linux_items/include/syslinux/wk_sys.cfg

@@ -2,7 +2,7 @@ INCLUDE boot/syslinux/wk_head.cfg
 
 INCLUDE boot/syslinux/wk_sys_linux.cfg
 #UFD-WINPE#INCLUDE boot/syslinux/wk_sys_winpe.cfg
-#UFD#INCLUDE boot/syslinux/1201_hdclone.cfg
+#UFD-HDCLONE#INCLUDE boot/syslinux/1201_hdclone.cfg
-#UFD#INCLUDE boot/syslinux/1201_eset.cfg
+#UFD-ESET#INCLUDE boot/syslinux/1201_eset.cfg
 #DISABLED_UPSTREAM_BUG#INCLUDE boot/syslinux/wk_hdt.cfg
 INCLUDE boot/syslinux/wk_tail.cfg

.linux_items/include/syslinux/wk_sys_linux.cfg

@@ -8,16 +8,6 @@ LINUX boot/x86_64/vmlinuz
 INITRD boot/intel_ucode.img,boot/amd_ucode.img,boot/x86_64/archiso.img
 APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram loglevel=3
 
-LABEL wk_sys_linux_extras
-TEXT HELP
-Show extra Linux options
-ENDTEXT
-MENU LABEL Linux (i3)
-LINUX boot/x86_64/vmlinuz
-INITRD boot/intel_ucode.img,boot/amd_ucode.img,boot/x86_64/archiso.img
-APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram loglevel=3 i3
-SYSAPPEND 3
-
 LABEL wk_linux_cli
 TEXT HELP
 A live Linux environment (CLI)
@@ -26,5 +16,17 @@ ENDTEXT
 MENU LABEL Linux (CLI)
 LINUX boot/x86_64/vmlinuz
 INITRD boot/intel_ucode.img,boot/amd_ucode.img,boot/x86_64/archiso.img
-APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram nox nomodeset
+APPEND archisobasedir=%INSTALL_DIR% archisolabel=%ARCHISO_LABEL% copytoram nox
 SYSAPPEND 3
+
+#UFD-MINIMAL#LABEL wk_linux_minimal
+#UFD-MINIMAL#TEXT HELP
+#UFD-MINIMAL#A live Linux environment (Minimal)
+#UFD-MINIMAL#  * HW diagnostics, file-based backups, data recovery, etc
+#UFD-MINIMAL#ENDTEXT
+#UFD-MINIMAL#MENU LABEL Linux (Minimal)
+#UFD-MINIMAL#LINUX ../arch_minimal/vmlinuz
+#UFD-MINIMAL#INITRD boot/intel_ucode.img,boot/amd_ucode.img,../arch_minimal/archiso.img
+#UFD-MINIMAL#APPEND archisobasedir=arch_minimal archisolabel=%ARCHISO_LABEL% copytoram loglevel=3
+#UFD-MINIMAL#SYSAPPEND 3
+

.linux_items/include_x/airootfs/etc/skel/.Xresources

@@ -23,7 +23,7 @@ URxvt*externalBorder:   0
 !URxvt.colorUL:      	#87afd7
 URxvt.geometry:        92x16
 URxvt.internalBorder:	8
-URxvt.shading:		7
+URxvt.shading:		10
 URxvt.transparent:	true
 
 ! Base16 Isotope

.linux_items/include_x/airootfs/etc/skel/.config/rofi/config

@@ -7,5 +7,7 @@ rofi.color-normal: argb:d02d3036, #d8d8d8, argb:d02d3036, #2d3036, #d64937
 rofi.color-active: argb:d0222222, #d64937, argb:d0222222, #d64937, #d8d8d8
 rofi.color-urgent: argb:d0888888, #d8d8d8, argb:d0888888, #888888, #d64937
 
+rofi.font: Noto Sans 12
+
 rofi.separator-style: solid
 rofi.hide-scrollbar: true

.linux_items/include_x/airootfs/etc/skel/.config/systemd/user/timers.target.wants/update-conky.timer

@@ -0,0 +1 @@
+../update-conky.timer

.linux_items/include_x/airootfs/etc/skel/.config/systemd/user/update-conky.service

@@ -0,0 +1,6 @@
+[Unit]
+Description=Conky config update service
+
+[Service]
+Type=oneshot
+ExecStart=%h/.update_conky

.linux_items/include_x/airootfs/etc/skel/.config/systemd/user/update-conky.timer

@@ -0,0 +1,10 @@
+[Unit]
+Description=Conky config update timer
+
+[Timer]
+OnBootSec=5s
+OnUnitActiveSec=30s
+Unit=update-conky.service
+
+[Install]
+WantedBy=timers.target

.linux_items/include_x/airootfs/etc/skel/.update_conky

@@ -1,9 +1,15 @@
 #!/bin/bash
 
-IF_LIST=($(ip l | egrep '^[0-9]+:\s+(eth|en|wl)' | sed -r 's/^[0-9]+:\s+(\w+):.*/\1/' | sort))
+IF_LIST=($(ip l \
+  | egrep '^[0-9]+:\s+(eth|en|wl)' \
+  | sed -r 's/^[0-9]+:\s+(\w+):.*/\1/' \
+  | sort))
+
+# Reset conkyrc to default
+rm "${HOME}/.conkyrc"
+cp "${HOME}/.conkyrc_base" "${HOME}/.conkyrc"
 
 # Add interfaces to conkyrc
-if fgrep '#Network' $HOME/.conkyrc; then
 for i in "${IF_LIST[@]}"; do
   if [[ "${i:0:1}" == "e" ]]; then
     sed -i -r "s/#Network/Wired:\${alignr}\${addr $i}\n#Network/" $HOME/.conkyrc
@@ -14,5 +20,5 @@ if fgrep '#Network' $HOME/.conkyrc; then
 
 # Remove '#Network' line to prevent duplicating lines if this script is re-run
 sed -i -r "s/#Network//" $HOME/.conkyrc
-fi
 
+# vim: sts=2 sw=2 ts=2

.linux_items/include_x/airootfs/etc/skel/.update_x

@@ -4,6 +4,7 @@
 
 REGEX_XRANDR='^.* ([0-9]+)x([0-9]+)\+[0-9]+\+[0-9]+.* ([0-9]+)mm x ([0-9]+)mm.*$'
 REGEX_URXVT='(URxvt.geometry:\s+).*'
+TEST_STATION_WALLPAPERS='/usr/share/wallpaper/test-stations'
 
 # Get screen data
 xrandr_str="$(xrandr | grep mm | head -1)"
@@ -32,10 +33,10 @@ offset_urxvt="24"
 # Update settings if necessary
 if [[ "${dpi}" -ge 192 ]]; then
   # Conky
-  sed -i 's/minimum_size 180 0/minimum_size 360 0/' "${HOME}/.conkyrc"
+  sed -i 's/minimum_size 180 0/minimum_size 360 0/' "${HOME}/.conkyrc_base"
-  sed -i 's/maximum_width 180/maximum_width 360/' "${HOME}/.conkyrc"
+  sed -i 's/maximum_width 180/maximum_width 360/' "${HOME}/.conkyrc_base"
-  sed -i 's/gap_x 20/gap_x 40/' "${HOME}/.conkyrc"
+  sed -i 's/gap_x 20/gap_x 40/' "${HOME}/.conkyrc_base"
-  sed -i 's/gap_y 24/gap_y 48/' "${HOME}/.conkyrc"
+  sed -i 's/gap_y 24/gap_y 48/' "${HOME}/.conkyrc_base"
 
   # Fonts
   sed -i 's/!Xft.dpi: 192/Xft.dpi: 192/' "${HOME}/.Xresources"
@@ -47,6 +48,9 @@ if [[ "${dpi}" -ge 192 ]]; then
   # i3
   sed -i -r 's/(height\s+) 26/\1 52/' "${HOME}/.config/i3/config"
 
+  # Rofi
+  sed -i -r 's/Noto Sans 12/Noto Sans 24/' "${HOME}/.config/rofi/config"
+
   # Tint2
   sed -i 's/panel_size = 100% 30/panel_size = 100% 60/' \
     "${HOME}/.config/tint2/tint2rc"
@@ -67,13 +71,29 @@ fi
 urxvt_geometry="${width_urxvt}x${height_urxvt}+${offset_urxvt}+${offset_urxvt}"
 sed -i -r "s/${REGEX_URXVT}/\1${urxvt_geometry}/" "${HOME}/.Xresources"
 
+# Update conky
+$HOME/.update_conky
+
 # Update X
 xset s off
 xset -dpms
 xrdb -merge $HOME/.Xresources
 
-# Start common desktop apps
+# Set wallpaper
+_hostname="$(hostnamectl --static | sed 's/.1201.com//')"
+_ip="$(ip a show scope global \
+  | grep inet \
+  | head -1 \
+  | sed -r 's#.*inet ([0-9]+.[0-9]+.[0-9]+.[0-9]+.)/.*#\1#')"
+if [[ -e "$TEST_STATION_WALLPAPERS/${_hostname:+x}" ]]; then
+  feh --bg-fill "$TEST_STATION_WALLPAPERS/${_hostname:+x}"
+elif [[ -e "$TEST_STATION_WALLPAPERS/${_ip:+x}" ]]; then
+  feh --bg-fill "$TEST_STATION_WALLPAPERS/${_ip:+x}"
+else
   feh --bg-fill "$HOME/.wallpaper"
+fi
+
+# Start common desktop apps
 compton --backend xrender --xrender-sync --xrender-sync-fence &
 sleep 1s
 x0vncserver -display :0 -passwordfile $HOME/.vnc/passwd -AlwaysShared &

.linux_items/include_x/airootfs/etc/skel/.zlogin

@@ -12,9 +12,6 @@ if [ "$(fgconsole 2>/dev/null)" -eq "1" ]; then
         sed -i -r 's/openbox-session/i3/' ~/.xinitrc
     fi
 
-    # Update Conky
-    $HOME/.update_conky
-
     # Start X or HW-diags
     if ! fgrep -q "nox" /proc/cmdline; then
         # Kill Xorg after 30 seconds if it doesn't fully initialize

.linux_items/include_x/airootfs/usr/share/wallpapers/test-stations/10.120.1.30

@@ -0,0 +1 @@
+bender

.linux_items/include_x/airootfs/usr/share/wallpapers/test-stations/10.120.1.31

@@ -0,0 +1 @@
+cortana

.linux_items/include_x/airootfs/usr/share/wallpapers/test-stations/10.120.1.32

@@ -0,0 +1 @@
+glados

.linux_items/include_x/airootfs/usr/share/wallpapers/test-stations/10.120.1.33

@@ -0,0 +1 @@
+shodan

.linux_items/include_x/airootfs/usr/share/wallpapers/test-stations/10.120.1.34

@@ -0,0 +1 @@
+skynet

.linux_items/include_x/airootfs/usr/share/wallpapers/test-stations/10.120.1.35

@@ -0,0 +1 @@
+sex-robot