d8952ed26f
* Disabled gputest
* The package is failing to install.
* Now using Midori GTK3 build
* GTK2 was pulled from main repos for security reasons
* Removed warnings about missing UFD
* For use with live sessions
* Wallpaper updated for live sessions
* Wallpaper is now set at startup
* Checks for UFD source but defaults to included file
* Bugfix: Wallpaper is now set for multiple monitor/workspace setups
* Disabled choose-mirror service
* Better permission handling
* build-wk now checks if running as root
* build-wk now sets permissions before calling build.sh
* Should prevent build failues as build.sh expects files to be owned by root
* build-wk sets ownership back to builduser.builduser during cleanup
* Better menu for HW-Diags
* The script now returns to the menu after running a selection
* Unless the mode was set directly by passing a valid argument
* NOTE: This allows for easier use in CLI mode
* Add delay before removing /media/wktech
* Adjusted TMP_DIR in build-wk
* Fixed path to custom repo
* Trimming the fat
* hostname / hosts now configured by customize_airootfs.sh
* removed files from etc that were at default settings
* removed grml zsh config since oh-my-zsh/lean is used
* Defined a LOG_DIR for build-wk
* Introducing libinput
* Switched to libinput over synaptics as it has been deprecated.
* Should restore touchpad functionality going forward.
* Full mount path SHOULD now be displayed for mount-all-volumes.
* Added CLI Screensavers
* diag-network works now
* network connection tests now passes all ipv4 private ip ranges
* 10.0.0.0/8, 172.16.0.0/12, & 192.168.0.0/24
* need to add ipv6 at some point
* hw-diag menu flow adjusted
* New hostname and more bugfixes
* hostname switched to wk-arch
* ufw package is now installed
* adjusted upload section of hw-diags
* Added alias for start-wifi
* Booting to CLI mode will autologin wktech
* When booting to the CLI the motd shows some avail commands
* Adjusted HW-Diags menu for use in CLI mode
165 lines
6.7 KiB
Text
165 lines
6.7 KiB
Text
#
|
|
# General configuration
|
|
#
|
|
# start-default-seat = True to always start one seat if none are defined in the configuration
|
|
# greeter-user = User to run greeter as
|
|
# minimum-display-number = Minimum display number to use for X servers
|
|
# minimum-vt = First VT to run displays on
|
|
# lock-memory = True to prevent memory from being paged to disk
|
|
# user-authority-in-system-dir = True if session authority should be in the system location
|
|
# guest-account-script = Script to be run to setup guest account
|
|
# logind-check-graphical = True to on start seats that are marked as graphical by logind
|
|
# log-directory = Directory to log information to
|
|
# run-directory = Directory to put running state in
|
|
# cache-directory = Directory to cache to
|
|
# sessions-directory = Directory to find sessions
|
|
# remote-sessions-directory = Directory to find remote sessions
|
|
# greeters-directory = Directory to find greeters
|
|
# backup-logs = True to move add a .old suffix to old log files when opening new ones
|
|
#
|
|
[LightDM]
|
|
#start-default-seat=true
|
|
#greeter-user=lightdm
|
|
#minimum-display-number=0
|
|
#minimum-vt=7 # Setting this to a value < 7 implies security issues, see FS#46799
|
|
#lock-memory=true
|
|
#user-authority-in-system-dir=false
|
|
#guest-account-script=guest-account
|
|
#logind-check-graphical=false
|
|
#log-directory=/var/log/lightdm
|
|
run-directory=/run/lightdm
|
|
#cache-directory=/var/cache/lightdm
|
|
#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions
|
|
#remote-sessions-directory=/usr/share/lightdm/remote-sessions
|
|
#greeters-directory=/usr/share/lightdm/greeters:/usr/share/xgreeters
|
|
#backup-logs=true
|
|
|
|
#
|
|
# Seat configuration
|
|
#
|
|
# Seat configuration is matched against the seat name glob in the section, for example:
|
|
# [Seat:*] matches all seats and is applied first.
|
|
# [Seat:seat0] matches the seat named "seat0".
|
|
# [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client".
|
|
#
|
|
# type = Seat type (xlocal, xremote, unity)
|
|
# pam-service = PAM service to use for login
|
|
# pam-autologin-service = PAM service to use for autologin
|
|
# pam-greeter-service = PAM service to use for greeters
|
|
# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
|
|
# xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option)
|
|
# xserver-config = Config file to pass to X server
|
|
# xserver-layout = Layout to pass to X server
|
|
# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
|
|
# xserver-share = True if the X server is shared for both greeter and session
|
|
# xserver-hostname = Hostname of X server (only for type=xremote)
|
|
# xserver-display-number = Display number of X server (only for type=xremote)
|
|
# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
|
|
# xdmcp-port = XDMCP UDP/IP port to communicate on
|
|
# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
|
|
# unity-compositor-command = Unity compositor command to run (can also contain arguments e.g. unity-system-compositor -special-option)
|
|
# unity-compositor-timeout = Number of seconds to wait for compositor to start
|
|
# greeter-session = Session to load for greeter
|
|
# greeter-hide-users = True to hide the user list
|
|
# greeter-allow-guest = True if the greeter should show a guest login option
|
|
# greeter-show-manual-login = True if the greeter should offer a manual login option
|
|
# greeter-show-remote-login = True if the greeter should offer a remote login option
|
|
# user-session = Session to load for users
|
|
# allow-user-switching = True if allowed to switch users
|
|
# allow-guest = True if guest login is allowed
|
|
# guest-session = Session to load for guests (overrides user-session)
|
|
# session-wrapper = Wrapper script to run session with
|
|
# greeter-wrapper = Wrapper script to run greeter with
|
|
# guest-wrapper = Wrapper script to run guest sessions with
|
|
# display-setup-script = Script to run when starting a greeter session (runs as root)
|
|
# display-stopped-script = Script to run after stopping the display server (runs as root)
|
|
# greeter-setup-script = Script to run when starting a greeter (runs as root)
|
|
# session-setup-script = Script to run when starting a user session (runs as root)
|
|
# session-cleanup-script = Script to run when quitting a user session (runs as root)
|
|
# autologin-guest = True to log in as guest by default
|
|
# autologin-user = User to log in with by default (overrides autologin-guest)
|
|
# autologin-user-timeout = Number of seconds to wait before loading default user
|
|
# autologin-session = Session to load for automatic login (overrides user-session)
|
|
# autologin-in-background = True if autologin session should not be immediately activated
|
|
# exit-on-failure = True if the daemon should exit if this seat fails
|
|
#
|
|
[Seat:*]
|
|
#type=xlocal
|
|
pam-service=lightdm
|
|
pam-autologin-service=lightdm-autologin
|
|
#pam-greeter-service=lightdm-greeter
|
|
#xserver-command=X
|
|
#xmir-command=Xmir
|
|
#xserver-config=
|
|
#xserver-layout=
|
|
#xserver-allow-tcp=false
|
|
#xserver-share=true
|
|
#xserver-hostname=
|
|
#xserver-display-number=
|
|
#xdmcp-manager=
|
|
#xdmcp-port=177
|
|
#xdmcp-key=
|
|
#unity-compositor-command=unity-system-compositor
|
|
#unity-compositor-timeout=60
|
|
#greeter-session=example-gtk-gnome
|
|
#greeter-hide-users=false
|
|
#greeter-allow-guest=true
|
|
#greeter-show-manual-login=false
|
|
#greeter-show-remote-login=true
|
|
#user-session=default
|
|
#allow-user-switching=true
|
|
#allow-guest=true
|
|
#guest-session=
|
|
session-wrapper=/etc/lightdm/Xsession
|
|
#greeter-wrapper=
|
|
#guest-wrapper=
|
|
#display-setup-script=
|
|
#display-stopped-script=
|
|
#greeter-setup-script=
|
|
#session-setup-script=
|
|
#session-cleanup-script=
|
|
#autologin-guest=false
|
|
autologin-user=wktech
|
|
autologin-user-timeout=0
|
|
#autologin-in-background=false
|
|
#autologin-session=
|
|
#exit-on-failure=false
|
|
|
|
#
|
|
# XDMCP Server configuration
|
|
#
|
|
# enabled = True if XDMCP connections should be allowed
|
|
# port = UDP/IP port to listen for connections on
|
|
# listen-address = Host/address to listen for XDMCP connections (use all addresses if not present)
|
|
# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
|
|
# hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset)
|
|
#
|
|
# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn. Alternatively
|
|
# it can be a word and the first 7 characters are used as the key.
|
|
#
|
|
[XDMCPServer]
|
|
#enabled=false
|
|
#port=177
|
|
#listen-address=
|
|
#key=
|
|
#hostname=
|
|
|
|
#
|
|
# VNC Server configuration
|
|
#
|
|
# enabled = True if VNC connections should be allowed
|
|
# command = Command to run Xvnc server with
|
|
# port = TCP/IP port to listen for connections on
|
|
# listen-address = Host/address to listen for VNC connections (use all addresses if not present)
|
|
# width = Width of display to use
|
|
# height = Height of display to use
|
|
# depth = Color depth of display to use
|
|
#
|
|
[VNCServer]
|
|
#enabled=false
|
|
#command=Xvnc
|
|
#port=5900
|
|
#listen-address=
|
|
#width=1024
|
|
#height=768
|
|
#depth=8
|