e6e51498dd
Clear ddrescue pane every minute
2020-01-03 18:36:53 -07:00
30a5df8a00
Fix timezone in SMART pane
2020-01-03 18:36:40 -07:00
4a2b18e4f7
Added confirmation to Quit if recovery < 100%
2020-01-03 17:55:23 -07:00
848ccc3ef1
Made several State() functions "private"
2020-01-03 17:54:55 -07:00
097360ca0a
Always ask GPT/MBR/Source when formatting a disk
...
* This fixes cloning partitions when not creating a boot partiton
2020-01-03 17:32:51 -07:00
6eaf5c2bc2
Get accurate size from ddrescuelog
...
* Reported size is off by one sector in some cases
2020-01-03 17:25:12 -07:00
eb702577ae
Mark clones as started to allow resuming
2020-01-03 16:45:47 -07:00
276e2e0dda
Made mode a State() variable
2020-01-03 16:38:48 -07:00
a4b5e81ef1
Made working_dir a State() variable
2020-01-03 16:08:38 -07:00
4f2b31c705
Avoid crash while stopping ddrescue
...
* Killall is needed because of sudo
2020-01-03 01:14:06 -07:00
2b18da7244
Added real ddrescue command logic
...
* Still needs testing!!
* Set all dry_run keywords to default to True
2020-01-03 00:47:33 -07:00
c22c3da493
Expanded safety checks
...
* Added destination NVMe/SMART checks
2020-01-02 23:33:21 -07:00
2983eb9bd3
Updated run_ddrescue()
...
* Added SMART pane logic
2020-01-02 23:24:23 -07:00
299b075eef
Fixed BlockPair().safety_check()
2020-01-02 22:32:18 -07:00
9ae8810282
Added real disk format section
...
* --dry-run=True safety wheels still engaged
2020-01-02 21:22:47 -07:00
ac04a3ddc5
Added another safety check for block pairs
...
* Needed one more check since clone pairs were assumed to be okay
2020-01-02 21:14:25 -07:00
5d0ed475a6
Added option to match source partition table type
2020-01-02 20:07:46 -07:00
9702d7665f
Added limited support for converting MBR/GPT types
2020-01-02 19:54:18 -07:00
6dc887b04e
Added initial disk formatting sections
2020-01-02 15:50:26 -07:00
764d35836b
Force running all passes if retry selected
2020-01-01 15:06:16 -07:00
1dacdd4637
Abort if an invalid image destination selected
2020-01-01 15:02:23 -07:00
f45a10395f
Added --force-local-map option
2020-01-01 15:02:11 -07:00
df6f3ba8e1
Added initial ddrescue pass logic
2019-12-30 20:21:37 -07:00
e88e4ab3eb
Added ddrescue settings sections
2019-12-30 19:29:32 -07:00
bcd46d4017
Added SMART/Journal panes
2019-12-30 19:25:46 -07:00
d9561a0159
pylint cleanup
2019-12-30 18:47:35 -07:00
e7fbc21721
Added EToC logic
2019-12-30 17:43:15 -07:00
0ddafe8a42
Updated side pane sections
2019-12-30 16:40:28 -07:00
631449e40a
Added format_status_string()
2019-12-30 16:40:03 -07:00
89de1d52bb
Updated BlockPair __init__() and pass_complete()
2019-12-30 16:37:49 -07:00
6ad68c37d4
Added update_progress_pane()
...
* Still a WIP
2019-12-29 19:29:09 -07:00
fa39801523
Adjusted block pair report
2019-12-26 20:18:17 -07:00
7d7dc70630
Added map data loading sections
2019-12-26 20:16:35 -07:00
fc0a37999b
Added size safety check to ddrescue TUI
2019-12-26 19:27:08 -07:00
bd3601e0c8
Ask for ticket ID and use in working_dir
2019-12-26 17:35:58 -07:00
20ffa0c6db
Added --start-fresh argument
2019-12-24 18:01:04 -07:00
ef6abce6ab
Skip source partition selection if using JSON data
2019-12-24 17:35:38 -07:00
f542b62f3c
Use source model name in clone settings save file
2019-12-24 16:44:26 -07:00
4c50a1fb8a
Added first run flag to clone settings
...
* If the loaded settings are for a non-attempted recovery discard settings
2019-12-24 16:43:07 -07:00
67bb9223aa
Moved block pair report to new function
2019-12-24 16:42:18 -07:00
e7e3261b0a
Fixed partition separators
2019-12-24 16:38:42 -07:00
f71cc8ad68
Expanded block pair sections and confirmations
2019-12-22 21:24:02 -07:00
1ed6309971
Include selected source parts in 1st confirmation
2019-12-22 19:05:32 -07:00
6d6380dc6a
Added clone load/save and add block pair sections
2019-12-22 18:49:07 -07:00
0f2007f5dc
Set working directory for ddrescue TUI
...
* If cloning use backup server share
* If imaging use destination directory
* If a preferred directory and fstype can't be used then warn the user
2019-12-22 16:14:03 -07:00
428d255538
Added selection confirmation sections
2019-12-21 16:53:55 -07:00
0f0c47bbe4
Force selecting at least one partition/device
2019-12-20 12:54:42 -07:00
59ef06f402
Added select_path()
2019-12-19 11:59:34 -07:00
2fb2c3fa6e
Adjusted loopback device descriptions
2019-12-19 11:31:32 -07:00
b20e6cc4ad
Mount passed filepath as raw image
...
* Also unmount atexit
2019-12-18 20:47:06 -07:00
c3245c92da
Handle passing dir/file paths to ddrescue-tui
2019-12-18 19:28:52 -07:00
3fc9a843fc
Added select_disk_parts()
...
* Differentiate between all parts selected and whole disk selected
2019-12-13 20:04:15 -07:00
c72372d55c
Replaced platform.system() with PLATFORM var
...
* Better?
2019-12-13 19:01:26 -07:00
bc2c3a2c80
Expanded source/dest disk selection sections
2019-12-13 18:37:36 -07:00
da5f521f92
Added wk.hw.ddrescue.select_disk()
2019-12-12 19:29:32 -07:00
b746cda6e7
Bugfix
2019-12-12 18:46:44 -07:00
3733da17fc
Moved get_disks() from wk/hw/diags to wk/hw/obj
2019-12-12 18:36:57 -07:00
48a6b3200b
Added init_recovery()
...
* Set mode
* Select/verify source/dest
2019-12-12 17:22:02 -07:00
3a8c052d5a
Updated ddrescue menu sections
...
* Support loading presets
2019-12-12 16:43:23 -07:00
045d2b2571
Updates ddrescue-tui tmux sections
2019-12-12 16:39:42 -07:00
7a880e2ee7
Added initial ddrescue sections
...
* Very early outline, very broken still
2019-12-10 15:56:12 -07:00
07cb287eb0
Updated wk.net.connected_to_private_network()
...
* Can either return True/False or return None/raise Exception
* Added network check to mount_backup_shares()
2019-12-09 20:53:42 -07:00
8e5bfa12f4
Added NVMe SMART status checks
...
* Addresses issue #130
2019-12-09 16:48:35 -07:00
23c99084b5
Drop SIGWINCH sections
2019-12-09 16:48:15 -07:00
cc85e3e8ed
Improve abort handling
2019-12-09 16:32:35 -07:00
081658550b
Added debug report sections
...
* HW-Diags debug reports are saved after showing results or atexit
2019-12-09 15:55:30 -07:00
82341dbbb3
Moved disk safety checks to after the test
...
* This way failures during the last test should be caught
2019-12-08 17:02:10 -07:00
6071470b6a
Add note to disk report for critical HW error(s)
2019-12-08 16:52:20 -07:00
376a9e92ba
Supress a couple pylint warnings
2019-12-08 16:42:34 -07:00
9dc8329dec
Updated self-test sections
...
* Improved abort handling
* Always include report if state.tests['Disk Self-Test'] is enabled
* Send abort command via smartctl if aborting self-test(s)
2019-12-08 16:37:37 -07:00
c09cd0c9c2
Added disk safety check before each test
...
* Includes possible workaround for SMART self-test TimedOut errors
2019-12-08 15:29:18 -07:00
7d66b723ca
Update test report on ERROR
2019-12-06 19:34:53 -07:00
126aaae8ba
Fix IO_RATE_REGEX under macOS
2019-12-06 19:31:32 -07:00
8f909182d3
Bugfix: typo and batch catch
2019-12-06 19:21:24 -07:00
1f74b0b989
Use "RAW" disks under macOS
2019-12-06 19:18:40 -07:00
a0b07cbfde
Added I/O Benchmark sections
2019-12-06 19:10:36 -07:00
a76d7775fd
Updated badblocks sections
...
* Increaded pane height to 5
* Updated pass/fail/unknown logic
* Reduced lines included in reports
2019-12-06 13:02:57 -07:00
b45dc74e5a
Start logging after updating log path
2019-12-06 13:01:31 -07:00
e1ef9db6b6
Color disk labels in badblocks panes
2019-12-05 23:02:08 -07:00
d173d317e3
Updated badblocks section
...
* Start tests in reverse order (so they appear in order on screen)
* Fixed report parsing
2019-12-05 22:57:13 -07:00
76772be422
Added badblocks sections
...
* Supports running in parallel
* Dropped NonBlockingStreamReader usage
2019-12-05 22:20:26 -07:00
6167d0d78d
Get disk serial numbers under macOS
2019-12-05 14:24:57 -07:00
da7c12bb61
Don't use dummy test objects when no disks avail
2019-12-05 14:20:17 -07:00
fb4b44fefb
Fixed temps pane under macOS
2019-12-03 18:16:33 -07:00
65c08ad972
Updated disk_self_test()
...
* Parallel self-tests!
2019-12-03 17:36:52 -07:00
b71bca4577
Updated disk_attribute_check()
2019-12-03 16:31:26 -07:00
445523e5f1
Fix aborting Prime95 test
2019-12-03 15:18:10 -07:00
6da34c1f2b
Only register tmux atexit when running HW Diags
...
* Prevents unintended killing of tmux panes when importing wk or wk.hw
2019-12-03 15:03:02 -07:00
c0b6606758
Stop Prime95 with INT signal instead of TERM
2019-12-03 14:47:57 -07:00
d1005ad0a9
Updated sensor name formatting
2019-12-02 22:47:09 -07:00
e041125c20
Added hw-sensors
2019-12-02 21:02:12 -07:00
4dc41aec27
Bugfix: mprime typos
2019-12-02 20:31:33 -07:00
4990537082
Handle critical temps correctly in mprime sections
...
* Moved ThermalLimitReachedError catches to wk.hw.sensors
* Before they would never be caught and would never stop the script
* Added cpu_reached_critical_temp() to wk.hw.sensors
* This allows us to check if it happened without exceptions
* Added thermal_action to wk.hw.sensors
* This is run when ThermalLimitReachedError(s) are caught
* Stop print_countdown if mprime is terminated
* This is required since it may be killed in the background
2019-12-02 20:11:02 -07:00
c520b5a865
Update for Python 3.8 pylint alerts
2019-12-02 17:55:05 -07:00
7796189d14
Clear screen before all diag functions
2019-12-02 17:54:48 -07:00
aa3b69f6fa
Added progress pane logic
2019-11-30 22:43:10 -07:00
4cadb913e8
Dropped bufsize=1 due to Python 3.8 warning
2019-11-30 21:29:24 -07:00
79371a3fa5
Added results screen to hw-diags
2019-11-14 20:43:44 -07:00
402c4359a1
Split Prime95 and cooling Test() objects
2019-11-14 20:16:15 -07:00
fec2473b93
Fixed Prime95 test length
2019-11-14 19:16:10 -07:00
45086c90bb
Prime95 test fully functional
2019-11-14 19:13:21 -07:00
1a91f72d8c
Running and stopping Prime95 working
2019-11-13 19:45:53 -07:00
46a6dda0ff
Prime95 workflow mostly done
2019-11-13 17:47:52 -07:00
0eadb784bb
Updated get_ram_list_linux()
2019-11-13 11:14:55 -07:00
aa5b5cd9b7
Selecting and running (dummy) tests now working
2019-11-12 21:10:11 -07:00
d4ca575426
Fix get_disks_macos()
2019-11-12 20:06:18 -07:00
1054794af3
Added get_disks()
...
* This calls either get_disks_linux() or get_disks_macos()
2019-11-12 19:56:39 -07:00
4e6b2cd4da
Started work on per-pass log handling in hw-diags
2019-11-12 17:32:55 -07:00
9b5d9e1186
Added watch-mac and reverted previous commit
...
* This allows the degree symbol to be displayed correctly
* (At least in iTerm2)
2019-11-12 10:36:34 -07:00
4bd4536cfd
Avoid using the unicode degree symbol under macOS
...
* The (home)brew watch command butchers the unicode?
2019-11-11 23:57:48 -07:00
e3d0902c45
Updated wk.hw.sensors
...
* Added monitor_to_file()
* Added save_average_temps()
2019-11-11 23:22:47 -07:00
4ecdc80e4c
Added sensor update sections
2019-11-11 22:18:09 -07:00
b15c01ac37
Fixed sensor sections under macOS
2019-11-11 21:47:55 -07:00
dc030ab076
Added initial version of wk.hw.sensors
...
* Supports Linux and macOS
* Only initial temp, no updates yet
2019-11-11 21:29:21 -07:00
72905f9ccc
Added CLI options to hw-diags
2019-11-10 21:05:41 -07:00
21dfeac20b
Expanded logging in wk.hw.diags
2019-11-10 20:22:48 -07:00
196e2adc82
Added tmux layout maintenance sections
...
* Support both threading and signal based calls
* Should provide a smoother UIX under Linux & macOS
2019-11-10 19:10:35 -07:00
0cbc858cf4
Intentionally crash if not running inside tmux
2019-11-10 18:05:06 -07:00
0b6cd1cb6c
Added secret menu options in hw-diags
2019-11-10 17:42:04 -07:00
964885d63c
Ensure tmux panes are closed atexit for hw-diags
2019-11-10 17:38:03 -07:00
76a501af85
Added State() and tmux sections to wk/hw/diags
2019-11-10 17:04:45 -07:00
2520126905
Use broader imports for wk/hw/diags.py
2019-11-10 16:22:04 -07:00
fe228a5edc
Added keyboard_test()
2019-11-10 15:17:00 -07:00
100757ba69
Added network_test()
2019-11-10 14:47:56 -07:00
8f663072f6
Added HW-Diags audio test, menu, and launcher
2019-11-09 19:25:30 -07:00
205c5ed0fc
Support model-specifc attribute thresholds
...
* Addresses issue #142
2019-11-08 16:00:27 -07:00
a053931c17
Added Test() object
2019-11-07 20:46:21 -07:00
b162c99d6e
Added BaseObj() class
2019-11-07 20:40:50 -07:00
12de0e5b84
Inlcude RAM vendor ID for unknown IDs
2019-11-07 18:58:20 -07:00
0e9b1af56b
Added safety check to Disk().get_details()
2019-11-07 18:57:31 -07:00
d933ff9742
Reordered functions
2019-11-01 18:52:26 -06:00
e634d1691f
Added SMART self-test sections
2019-11-01 18:51:02 -06:00
93102b5144
Reworked checking Disk() attributes
...
* Added separate Disk().check_attributes() function
* Can be used to check all KNOWN_ATTRIBUTES or just blocking ones
* Renamed ATTRIBUTES to KNOWN_ATTRIBUTES for clarity
* Renamed 'Critical' column to 'Blocking'
* Added '(Failed)' note to attribute report
* Addresses issue #131
2019-10-31 19:19:52 -06:00
07fdbcdd7c
Added Disk().safety_checks()
...
* Raises an exception for blocking events
* Removed "Ignore" column from ATTRIBUTES
* Listed attributes should either be warnings or errors
* Only 'Critical' attributes should block futher tests
2019-10-31 18:28:34 -06:00
d25b341eb3
Added is_4k_aligned_macos()
2019-10-31 16:48:30 -06:00
5d6b7578d3
Fixed 4K alignment check under Linux
2019-10-31 16:34:54 -06:00
2a019d09a0
Updated Disk notes sections
2019-10-31 16:33:35 -06:00
117df6158a
Fix attribute value colors
2019-10-28 20:57:34 -06:00
ae5e9b8f34
Added 4K alignment check
2019-10-28 20:45:30 -06:00
c7090e77c2
Added Disk().generate_report()
...
* Uses new merged ATTRIBUTES config
2019-10-28 20:15:58 -06:00
fbb480dae6
Adjusted drive details
...
* Use 'bus' instead of 'proto(col)' or 'tran'
* I think it's a better description
* Reordered details alphanumerically
* Removed 'log-sec' from required details
* Only concerned with the phy-sec
2019-10-28 17:55:37 -06:00
6a1be5cf06
Moved wk.obj to wk.hw.obj
...
* Done because the main classes are CpuRam() and Disk()
* The rest are there for uniformity while working with HW objects
2019-10-28 17:46:17 -06:00
b41027562a
Added SafeMode enter/exit sections
2019-09-15 18:47:52 -07:00
bdf53b435a
Added placeholder files for submodules
2019-07-13 17:45:39 -06:00
